Power Cables Tenders

Cost towards special repairing of motor control panel with FASD starter – 2 nos. and 200 Amp, 415Volts MCCB incomer-01 No. 100 Amp outgoing MCCB-02 Nos. with changing following accessories i. L&K MNX contactor as Main contactor (MNX-70) - 01 No. ii. Star contactor (MNX-50) and delta contactor (MNX-70) - 01 No. each iii. Front & Side Add on Auxiliary contacts- (2NO+2NC) - 01 no. each. iv. Thermal overload Relay-01 No. v. Timer (0-60 sec)-01 No. vi. ON-OFF push buttons-02 Nos. vii. 3 phase Digital Voltmeter-01 No. C&S/ L&K/ Schneider make. viii. 3-phase Digital Ampermeter-01 No. ix. Multi protection Device-02 nos. C&S/MPD/ L&K/Minilac/Schneider make. x. 3 way selector switch-03 Nos. xi. CT 200/5A-03 Nos. and changing of damaged wires as per required and copper lugs., LED Phase indicating bulb-06 Nos., 16 mm2 single Core power cable grip to panel board-10 Mtrs., and 2.5 sq. single core copper cable-20 mtrs. Etc. with all fitting charges at Raw Water p/plant- Jhajhapara.

POWER CABLE 6A 3 CORE

Erection of LT Cable Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of LT AB cable 3x95+1x70+1x16 sq. mm on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

Power Cable

BOQ Notes: 1. Erection & commissioning materials (such as double compression cable glands, conduit fittings viz. couplers, elbows, bends, tees, circular boxes, inspection bend etc. conduit accessories viz. clips, saddles, spacing plates, entry bushes, lock nuts, check nut, plugs, heavy duty lugs, ferrules, expansion fasteners, covers for power outlets in wash rooms and showers, ball & sockets, earth clips, fan boxes, clamps, screws, ceiling rose, casing and capings, adapter gland set, reducer, U bolt with nut washer, csk nut bolt, M / H Hook with rawl plug, Nail clamp for 3Cx2.5 Sq. mm CU LT XLPE Cable, Electrical tape etc.) and accessories including commissioning & operational spares up to system handing over to NTPC has to be worked out for complete and successful erection & commissioning of the total supply and free issue material as per BOQ. The price to be quoted for MAIN SUPPLY at S.No.14 accordingly. Bidder to furnish detailed itemwise breakup of quantity (for all equipments and fittings under "MAIN SUPPLY" & "ERECTION and COMMISSIONING (INSTALLATION)) and unit prices for Erection & commissioning materials as separate Annexure alongwith price bid for reference. 2. Erection & commissioning materials for equipments and fittings under bidder scope of supply is in bidder's scope, Erection & commissioning materials for free issue materials (like GI wire & Flat, MS Rod, Hume Pipe, PVC Wire, Hot dip Galvanised Rigid Steel Conduits, Cable and buried underground cable as listed at S.No. 10,11,12,16,17,18 and 19 of Unpriced Schedule for Erection and Commissioning Schedule respectively ) is also in bidder's scope, Accordingly, Erection & commissioning of all equipments and fittings under "MAIN SUPPLY" & "ERECTION and COMMISSIONING (INSTALLATION)" is in bidder's scope. 3. Conduit, Wire & Cable shall be supplied by BHEL free of cost. a. All erection & commissioning material and consumables for above shall be supplied by bidder. Cost for the same is deemed to be included in MAIN SUPPLY at S.No.14 accordingly. b. Fabrication charges of J-Pole shall be included in erection & commissioning prices of conduit, no separate charges shall be payable for the same. 4. Fabrication & painting charges of structural steel shall be part of erection charges fo those equipment for which the same is being used. 5. All measuring and testing instruments required during erection, testing, commissioning and performance testing shall be arranged by the bidder and taken back. 6. Installation of lamp shall be part of E&C of respective fixture. The E&C price of fixtures to be quoted accordingly. 7. Lighting shall be Energy conservation building code (ECBC) compliant, bidder to include E&C of all items (like lighting fixture, lighting lamp, lighting panel, switch boxes, sensors, automatic control system) required fo the same and furnish detailed BOQ along with the bid. 8. For any clarificatin please refer technical specificaiton : PE-TS-520-558-E001