Loading…
Loading…
351 results • Best match
Hiring charges for supplying on rental basis, shifting, installation, running maintenance, operation and restoring of 6 Nos Electric Driven Trolley Mounted Centrifugal pumps and 05 Nos. Diesel Driven Centrifugal Trolley Mounted pumps With all accessories at different specific location in Nagar Parishad Hajipur during upcoming monsoon -2026 (15th June to 15th oct 26) under Patna West (Mech.), Works division Buidco Patna.
xi providing service cable from nearest transformer, Power cable etc of required length.
PURCHASE OF ECE LAB ELECTRONICS EQUIPMENTS
SIM Reader trainer kit Power supply : Operates on 230V AC ±10%, 50Hz mains supply Built-in regulated SMPS power supply Operating DC Supply : 5V/12V with overload and short-circuit protection SIM Card Interface : Supports GSM SIM Cards compatible with 2G / 3G / 4G / 5G networks SIM Card read/write interface Supports SIM card initialization, authentication and communication functions Compatible with standard 6-pin / 8-pin SIM card sockets Communication Interface : USB 2.0 interface for PC communication RS-232 serial communication interface UART Communication facility for embedded system interfacing SIM Operating Parameters : Selectable SIM Clock frequencies 3.579 MHz 7.159 MHz 14.318 MHz SIM Supply voltage selection facility SIM reset and activation control Supported Protocols and Standards : GSM ETSI 07.07 AND ETSI 07.05 AT command support ISO/IEC 7816 smart card communication support SIM communication command monitoring facility Hardware Features : On-board SIM card socket LED Indication for : Power status SIM detection Reset activity User manualUtility software CD / Downloadable software package Data transmission/reception Built-in keypad for standalone operation. LCD display module (128 × 64) for menu and status display. On-board microcontroller-based control section. Software Support: AT command execution and monitoring software. SIM manager utility software. Data logging and communication terminal utility. PC-based GUI software for SIM data communication experiments. Trainer Features: Fault simulation facility for troubleshooting experiments. Simulation of faults such as: SIM not detected Clock failure VCC failure Reset failure Multiple on-board test points for signal observation. Test points for: SIM RST SIM_CLK SIM IO VCC UART TX/RX Suitable for CRO/DSO signal monitoring. Glass epoxy PCB with educational block diagram layout. Compact tabletop enclosed cabinet design. Construction: Front panel with printed block diagram. Banana test points and patching facility. Standard Accessories: GSM SIM trainer unit. USB communication cable. RS-232 communication cable. Power cord.
Electro-Mechanical Works of 2x36 MW Tiuni Plasu HEP on EPC basis.
XLPE power cable as per specifications and scope defined in Chapter 9 of Section IX- (PTS)
PLEASE REFER THE TENDER DOCUMENTS
SIM READER TRAINER KIT Power Supply: • Operates on 230 V ac ±10%, 50 Hz mains supply. • Built-in regulated SMPS power supply. • Operating DC supply: 5 V / 12 V with overload and short-circuit protection. SIM Card Interface: • Supports GSM SIM cards compatible with 2G / 3G / 4G / 5G networks. • SIM card read/write interface. • Supports SIM card initialization, authentication, and communication functions. • Compatible with standard 6-pin / 8-pin SIM card sockets.Communication Interface: • USB 2.0 interface for PC communication. • RS-232 serial communication interface. • UART communication facility for embedded system interfacing. SIM Operating Parameters: • Selectable SIM clock frequencies: • 3.579 MHz • 7.159 MHz • 14.318 MHz • SIM supply voltage selection facility. • SIM reset and activation control. Supported Protocols and Standards: • GSM ETSI 07.07 and ETSI 07.05 AT command support. • ISO/IEC 7816 smart card communication support. • SIM communication command monitoring facility. Hardware Features: • On-board SIM card socket. • LED indication for: • Power status • SIM detection • Reset activity • Data transmission/reception • Built-in keypad for standalone operation. • LCD display module (128 × 64) for menu and status display. • On-board microcontroller-based control section. Software Support: • AT command execution and monitoring software. • SIM manager utility software. • Data logging and communication terminal utility. • PC-based GUI software for SIM data communication experiments. Trainer Features: • Fault simulation facility for troubleshooting experiments. • Simulation of faults such as: • SIM not detected • Clock failure • VCC failure • Reset failure • Multiple on-board test points for signal observation. • Test points for: • SIM_RST • SIM_CLK • SIM_IO • VCC • UART TX/RX • Suitable for CRO/DSO signal monitoring. • Glass epoxy PCB with educational block diagram layout. • Compact tabletop enclosed cabinet design. Construction: • Front panel with printed block diagram. • Banana test points and patching facility. Standard Accessories: • GSM SIM trainer unit. • USB communication cable. • RS-232 communication cable. • Power cord.12 • User manual. • Utility software CD / downloadable software package.
Invitation of Rates for the Supply and Installation of Computers, Laptops, Printers and Other Office Equipment on an As-Required Basis.
SECTION C : CABLES, ADAPTERS, POWER & STORAGE (All items shall have warranty of 1 years minimum)
Fd Heating Sys
Cable PVC insulated electric cables heavy duty 1100 volts grade multi standard copper conductor of size 1.5 Sqmm single core FRLS confirming to IS 1554 Part 1 1988 Make Havells Finolex Polycab ISI equivalent