Loading
Loading…
Loading…
2,454 results • Best match
Provision of AT power supply at different L/C gate & strengthening of AT power supply at panel room over MLDT division.
be supplied by Railway) for 16-50sq mm cable.
INJECTION CLONIDINE,TRAMADOL & MIDAZOLAM
Description :INJECTION CLONIDINE 150 MCG/ ML, 1 m amp. Product should be in Railway Board appr oved product list. ] Consignee CMS/RNC, SER Jharkhand 36.00 Numbers
Through Turnout Renewal (TWS) for total 269 sets in different yards of RKSN-PDPH, PDPH-NYG, PDPH-BYX & BJMD-GX section under the jurisdiction of Sr. DEN (South)/CKP. (4th Call)
1514.00 using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. 25mm gap Cess Welding with Railway's welding portion and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with Contractor's labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including all required handling and rehandling of rails, marking of welded joint, painting weld collar with anticorrosive paint, as directed by Engineer in charge. Note: 1 . Only welding portion and related accessories as per Annexure - I shall be supplied by Railways. 2. Welding shall be carried out only by trained welder having valid competency certificate. 3. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing.
Hubballi Division: Hebsur: Provision of 02 additional loop lines.(Maintenance Period-12 Months)
25mm gap 'in-situ' welding during traffic Each block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track.
Rajkot Division:-Providing RCC Box in place of pipe bridge No.483 at KM 937/0-1, Bridge No.484 at KM 937/9-0 and Bridge No.491 at KM 943/9-0.
6.00 196044.19 and up to 26.00 using Road crane capacity of 80 MT Removal of temporary girder, crib on both ends and placing temporary girder on crib / cess away from Railway track as directed by engineer at site under traffic block; filling of Railway's earth by ramming, pulling ballast from stack / adjoining track / same track, laying track, linking with approach track and packing of ballast for opening track at 20 kmph speed, boxing & dressing of cess, ballast profiling etc. Note: If earth is to be brought by contractor from outside, the same will be paid separately.
Electrical work in connection with provision of Power supply arrangement for New mechanized Laundary at ASH & GTNR, power supply arrangement work for SETC of PERC Dry cleaning machine , SETC of Tumbler Dryer , SETC of Rotary screw electric driven Air compressor , SETC of washer extractor , SETC of folder machine with stacker and SITC of feeder machine at linen center at GKP.
Excavation of trenchless track by horizontal direct drilling (HDD) method under 33 Railway track/busy road etc. at a depth of minimum 120 CM below ground level as per direction of site engineer incharge along with Supply and Laying of HDPE Pipe of 150/160 mm inner dia confirming to relevant IS in HDD portion. (HDPE Pipe shall be supplied by Contractor)