Railway Works & Supplies Tenders

Boxing and profiling of ballast as per procedure TRM prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. DANAPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 25mm gap 'in-situ' welding during traffic block using Railway's welding portion and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Welding portion and related accessories as per Annexure - I shall be supplied by Railways. All other items required shall be supplied by the Contractor. 2. Welding shall be carried out only by trained welder having valid competency certificate. 3. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 4. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track.

5) Railway crossing detail consisting gauge, nearest Railway station, Railway

Supply & Fixing of Outdoor type GI water proof looping cable box of size 10'' x 8'' x 6" of thickness of 16 SWG having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. for fixing of the existing Four Pole MCB inside of this loop box enclosure and fixing of this loop box inside of the existing Feeder Piller box including necessary fixing arrangement by S&F of MS clamps, nut, bolt, fasteners, washers etc. as required as per the site as per the direction of the EIC -- Size of the loop box as 250 mm x 200 mm x 150 mm [ For inside of Feeder Piller Piller Box ]

Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document no.RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in normal (all type) soil/strata,conforming to distances as per cable route plan and refilling and 11 ramming of loose soil. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on North Central Railway and instructions of Railway Engineer at site. In case 1.2 m depth of trench is not achievable due to site condition, specific approval of JAG/SG officer will be required for each site where trench depth of 1.2 m is not possible,only after approval of JAG/SG officer propotionate payment can be done.

junction box as per industrial standards complete in a manner as directed by Section Engineer in charge at site. Note: 1) The foundation design and drawing along with supporting IS specifications suitable for Octagonal poles supplied by Railways and as per site conditions should be submitted for approval before starting the work .2) Four metre Single arm Octagonal pole and accessories along with luminaries alone will be supplied departmentally. Above/

agencies who have worked under Railway Dept., agencies who have worked under