Loading
Loading…
Loading…
2,286 results • Best match
Repair and asphalting of the sides and resurfacing of the road from km 6.00 to 6.46 of Bijagarni-Kavalewadi-Janewadi-Karle-Bahadurwadi-Kineye to Join State Highway-54 in Belgaum Taluk for the year 2025-26.(Reserved for SC Category Only)
Village/ City Name Railway Crossing 0 0.00 0.00 RC 0.00 13.47 15.23 ST 1.76 KRDCL 0.00 0.00 0.00 Total Length 16.19
Construction on new Confrence Hall and Tender cell including provision of Work Station/Cubical, Special repair and renovation of Circulating Area, Parking Shed and CAO/Con's Office Building at Gorakhpur.
Providing and fixing in position aluminium cladding by using 4 mm thick composite panel with following details specifications.The aluminium alloy will be confirm to IS 733 and sections to IS 1948. Aluminium section will be 50mm x 50mm x 1.85mm angle for transom and mullionnonanodized with non visible screws, fasteners, dow coming weather sillicon sealent etc 1 complete including aluminium sleeves, dashing, coping and suspended system etc. complete. All other required hardware will be good quality as approved Railways. Aluminium composite panel will be 0.5 mm + 3.00 mm+0.50 mm thick. The composite panel shall be of reputed brands like AI UK bond? ALUCO bond, EURO bond, Aluplex etc. The size and shape of panels will be as decided by Railways. The item also includes providing and getting approval from Railways design and detailed working drawing for this cladding work.The cladding can be flat or on curved surface like column etc. as required. The rate will includes all fittings and fasteners etc.required for the work. Square
1) Enhancement of LHB / ICF coach maintenance facilities at Mysuru. 2) Ashokapuram - Construction of service rooms for C&W activities at AP station - Electrical arrangements.
Supply, installation, testing & commissioning of centrifugal Numbers type vertically multistage bore-well submersible pump as per the following technical specification. The Pump model QF duty point will be Flow 120LPM @ working Head 110 Mtr. The Pump design will be the Flow Range starting from 15 LPM to 130 LPM & Head Range of 150 Mtr. To 82 Mtr. The Pump material to be like, Pump impeller-SS 304, Pump casing-SS 304, Pump Shaft- Duplex Steel, Pump motor body- SS 304, Pump inbuilt strainer & NRV- SS 304. pump motor should be 5.5HP PMSM (Permanent Magnet Sync. Motor, i.e. operate on BLDC Technology) converter feed which will operate through 415V-AC/50 Hz standard power supply. The motor manufacturing and testing as per IEC- 60034-30-2 & IEC-60034-2-3. Supply and installation smart VFD rust proof for outdoor application to operate 5.5 HP PMSM type motor with dry run protection, over & under voltage protection, phase reversal protection, single phase preventer, graphical display, GSM based remote monitor system (RMS), fault indication alarm system, IP-65 deg. Of protection, water level indicator, auto/manual operation through device like mobile/laptop/PC. The regular pump operational data like current, voltage, hours of operation, power consumption to be access through Railway engineer devices like Mobile/Laptop/PC. The VFD selection to be done considering the maximum ampere rating of the pump on full load condition.
BODY POH work of 1050 Wagons (BOXN variant and SS wagons) for a period of one year at Wagon Repair Workshop, Badnera.
Crib Angle ( Inner) Drawing No. WD - 09034 - S Numbers - 16, Alt. 8, Item No. 4 Specn. No. : WD - 01 - CRF - 12,Rev. 1 NB:-Supplier should supply only CRF Section. However postforming or fabrication job and processes will be carried out by Railway.
MMGSY 2025-26 (96-5054-04-796-02 Sr.No 1-Earthen to BT) Construction of Baroliya Madhaldevi Faliya Chaudhari Maholla and Dhaneshbhai Maholla Road.(VR-NP) Km. 0/0 to 1/0 . [ Package : 07 ] , Tal. Dharampur, Dist. Valsad.
railway standard with collars for culverts carring
Standardization of turnouts and maintenance of track infrastructure in various yard in the section of ADEN/GJL.
Set Maintenance of track on main line & loops, Points & crossings etc. including special attention to section for carrying out various maintenance works listed in Indian Railways P.Way Manual / Bridge Manual for safe running of goods and passenger trains with contractor's tools / labours etc. complete, as directed by Engineer in-charge. Note: Contractor shall arrange one gang at any point of time comprising of minimum specified labours with sufficient experience in P.Way working.