Solar Panels Tenders

[34.36]Solar RPM/ Stud Providing and installation of solar cat eye produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the solar stud should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The Solar stud shall be round in shape for providing illumination in all directions. The solar stud shall also have high reflective polycarbonate/ methyl methecrylate lenses for conspicuity in passive mode and dual shanks for improved road presence. The solar studs are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cat eye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 5 mm. The body of the solar cat eye shall be resistant to dust and water ingress as per IP 65 standards. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. [Through Rate]

Lump sum price worked out by the contractor for SOLAR WATER HEATER WORK as listed in Schedule 'A' Part-XI brought forward from serial page No. 46 & 47.

GRID CONNECTED SOLAR PHOTOVOLTAIC POWER PLANT.

B.3- EXTERNAL ELECTRIFICATION (Street Light):- Supplying and installation of 30W solar street light with 30ah po4 lithium battery, 100 wp module with 6mtrs. Gl pole including material transport and proper cabling as per the direction of Engineer-in-charge.