Loading
Loading…
Loading…
1,436 results • Best match
REPAIRS TO PLUMBING JOINERY SUNKEN SLAB ROOF TREATMENT FLOORING INCLUDING INTERNAL WIRING AT COIMBATORE AND MADUKKARAI UNDER GE WELLINGTON
Supply and fix in replacement of heating element 2/3 KW of solar water heater complete all as specified and as directed.
PROVN OF OFFICERS MARRIED ACCOMMODATION AT NEW AMRITSAR MIL STATION
Lump sum price worked out by the contractor for SOLAR WATER HEATER WORK as listed in Schedule 'A' Part-XI brought forward from serial page No. 46 & 47.
Development work of Ecological Tourism Site at Wilson Hill, Dist.Valsad, Gujarat
GRID CONNECTED SOLAR PHOTOVOLTAIC POWER PLANT.
Slaughter house cum market building
B.3- EXTERNAL ELECTRIFICATION (Street Light):- Supplying and installation of 30W solar street light with 30ah po4 lithium battery, 100 wp module with 6mtrs. Gl pole including material transport and proper cabling as per the direction of Engineer-in-charge.
Pasture development work in gram patoda
Supply, Installation, Testing and Commissioning of Solar Photovoltaic System Poly/ Mono-crystalline MNRE approved Solar Modules- 24 V, 330 Wp with 60/72 cells with minimum 15% module efficiency, conforming to relevant latest IEC standard as per MNRE guidelines, with power output warranty of 90% of rated power for 10 years and 80% of rated power at the end of 25 years, connected suitably in series or parrallel, mounted on metallic structures (Hot dip galvanized according to IS: 4759) of adequate strength and appropriate design, having manuverable seasonal tilt angle and three times manual tracking, suitably fixed in PCC foundation using antitheft J bolt arrangement as per MNRE specfications for following :10 HP Power, 30 Module
Creation of infrastructure of Tactical Head Quarter (THQ) at the camp of 11th Bn ITBP situated at an altitude of10400 feet and a distance of 33 Km from Chungthang, Distt. Mangan, North Sikkim. Camp connected by road
Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 30 AH battery, charging time 8- 10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage: 12V DC , Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >80 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K /6000°K (As per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitry) of 50K hours lamp burring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required.(Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacity as per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature do'nt rise aboven 90°C) 30 Watt (System lumen efficacy >120 lm/Watt)