Street Lighting Tenders

Supplying and erecting LED street light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270V, Power Factor more than 0.95, THD 10%, CCT 3000K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/ watt. LED driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer in charge may select any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection- 4KV integral and, Light must have 440VAC line supply with over-voltage protection. 90 watts Cat. II (make: Wipro, Crompton, Philips, SURRIYA Bajaj, Osram) as directed by the Engineer-in-charge.

45 watt LED street light luminaire with heat

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 to 50 Watt. Confirming to IP 65 and above protection complete in all respect.SOR SI NO. 1423/18 CAT. AAA (make - philips / Wipro / crompton / Surya or its Equivalent)

45 watt LED street light luminaire with heat

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 deg. C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 45 Watt that LED junction temperature shall not rise above 90°C) . 45 watt

Supply and fix PVC insulated and PVC round sheathed three core 1.5 sqmm multi annealed copper conductor flexible type drawn through street light poles and including connection to street light and all accessories complete all as specified and as directed.