Street Lighting Tenders

P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover ( from 45W onwards ) and should be secondary lens on each LED . The System level Luminaire efficacy >=100 with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used .The LED Driver shall be BIS certified and Input Voltage AC 110 to 270 V AC with Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% , THD(I) 10% Humidity 10% to 90% RH Working Temp -20C to SOC . Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% initial lumens maintained ,Rendering Index >75% .Surge protection shall be min� 5 KV internal and min 10 KV external. Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed. LED Street Light fixture 70 Watt

Compound Light Supplying, Installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body finish with corrosion resistance fasteners (SS hardware) & silicon gasket for proper sealing with driver as per the requirement with Driver efficiency >80%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range 0o to 50o C and working RH 10%- 90%, internal surge protection of 5 KV internal and external SPD min. 10 KV, L,N,E as per IEC 61000-4-5. The driver rated output wattage should be 10% to 15% higher than lamp rating and at least 2 driver for 200W & above and Driver efficiency >85%, THD 10% as per IEC 61000-3-2 , P. F.≥0.9, IP- 66, IK-08 specified below, CRI >70, under voltage and over voltage protection, high efficiency lens with type II/III distribution as required with UV stabilized optical lens, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends. CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect and LED Chips of SMD mid to high-power (2.5 to 4 watt for 200 watt and above, as per required (LM 80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. System lumen efficacy shall be as below: System lumen efficacy ≥135 lm/Watt (Make: Crompton / Philips/ Wipro)

Supply and fixing of street light feeder piller. The feeder will be manufacture by CPRI Approved company. M.S. CRCA sheet 1.6 mm powder coated RAL 7035 with door lock etc. (i) Incomer 125 A, 36 KA FP, MCCB with thermal magnetic release based (O/C, S/C) Release, with spreader links and extended ROH (ii) 140 A TP Power Contactor with 2 NO+2NC Aux. Contact (AC-3 Duty), 150A Aluminium Bus bar control wire, hardware.(Make ABB/L&T/HPL/Havells) (iii) Digital Voltmeter 0-500V, CL-1.0 96x96 mm .(Make AE/ELM EASURE) (iv) VSS 6A .(Make AE/ELM EASURE) (v) Digital Ammeter 0-150A, CL-1.0 96x96 mm. (Make AE/ELM EASURE) (vi) ASS 6A (Make AE/ELM EASURE) (vii) CT for meter resin cast CL-1.0 150 A/5, 5 VA .(Make KAPPA) (viii) 24 Hrs. run timer (Mannually setting type) make L&T. (ix) Auto/Manual selector switch (Make- SALZER, KAYCEE) (x) ON/OFF Push button (Make-RASS) (xi) ON/OFF Indication light LED type 220V AC RYB (Make-RASS) (xii) Phase Indicator Light LED Type 220 Volt AC (Make-RASS) (xiii) Control MCB SP 6 A, 10 KA (Make ABB/L&T/HPL/Havells) Outgoing Section (i) 63A 4 Pole MCB 10 KA (Make ABB/L&T/HPL/Havells) (ii) 63 A MCB 4 Pole 10 KA O/G feeder-3No. (Make ABB/L&T/HPL/Havells) (iii) Neutal link

Supply & Fixing in replacement LED Security street light fitting 35/36 Watt 230 V AC outdoor type, energy saving and environment friendly light fitting with electronic gear housed with high pressure die cast aluminum housing LED street light luminaires complete with IP66 protection including all accessories complete all as specified and directed by Engineer-in-Charge. Notes:- (a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :- (i) Manufacturing defects. (ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account.

Supply and fix smart intergrated all in one solar street light of 24 Watt, 5700 K with High efficiency Mono crystalline solar PV Module, Lithium Ferro Phosphate battery with in build BMS technology, High Efficacy LED, MPPT solar charge controller and Aluminium Extruded body & is specially programmed to automatically contrtol the dimming and brightness of light, which increases the backup time including street light brackets made of 25 mm dia G.I. Pipe light grade in shape and including suitable size of reducer to fix the LED street light of capacity 24W and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. flat iron clamps, 2 Nos, M.S nut & bolt with cup washers complete all as specified and as directed.

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 60Watt. to 72 Watt. Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour. 7200-8640 system lumens, High Power LED with lenses, >120 Lm/W, PF>0.95,, Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT AAA