Street Lighting Tenders

Providing, installation, testing and commissioning of area lighting 100 Watt LED (Street Light Type) on top of octagonal pole. Having following specs: Input: 90-240 V 50 Hz Power Factor: >0.9 Colour Temperature: 4K - 6.5K Beam Angle: 120˚ - 170˚ Lumens: >12000 Operating Temperature: -20˚C to 60˚C The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68. The LED is properly fitted on the arm of the pole and connected to the copper wire as provided in the high mast pole

Supplying and erecting LED street light /

259 Supplying and erecting LED street light / Flood 60.00 Ea 3345.12

1 INDOOR SPORTS FACILITIES:- a) Indoor Sports Hall (G+1) with Facilities of Squash Court, Rooms, Table Tennis, Billiards & Fitness Centre- 1 No :- 1630.00 Sqm, b) 50m Indoor Shooting Range Hall (02 Bay)- 1 No. :- 906.00 Sqm. OUTDOOR SPORTS FACILITIES:- a) 400m Running Track (Open Area) (08 Lines)-1 No. :- 400m, b) Football Field (Artificial Turf) with Flood Lights- 1 No. :- 105mX68m, c) Modular Spectators Stand Block (1500 Sitting Capacity) with Covered Gallery-1 No. :- 851.00 Sqm, GUARD ROOM :- Single Storied Building- 1 No :-10.00 Sqm, PUMP ROOM with Under gorund tank- 75000 ltrs- 1 Job. ESS Single Storied Building 1 No. :- 100.00 Sqm. SITE DEVELOPMENT :- a) Levelling- 17,746 Sqm, b) Boundary Wall with MS Gates- 513m, c) Internal Road with WBM & Black topping- 1 km & painting of road surface, d) Footpath with PCC basde & 60mm thick Paver block- 2850 Sqm, e) External Sewerages- 1200m, f) External water supply- 1200m, g) Storm water drains- 2 km, h) Trenches for Service- 2 km, i) Under ground Sump- 75000 ltr, j) Horticulture works- 9000 Sqm and k) Electro Mechanical Works Internal Electrical/Signages Works: Internal & External Electrifications:- Design, Supply, installation, testing and commissioning of Internal lights, Fittings, Exhaust fan, Ceiling fan, Modular Switch board, Building Panels, Transformers, Street Lights etc. as per the directions of Engineer-In-Charge. PHE Works:- Design, Supply, installation, testing and commissioning of internal water supply with OHT, sanitation works as per CPWD-2021 specifications for all buildings under the direction of Engineer-In-Charge. Furniture/Signage Works:- Providing & fixing of internal furniture/ Signages for Buildings as per approved drawings submitted by the EPC Contractor under the direction of Engineer-In- Charge. Horticulture Works :- Horticulture works to bed one as per approved master plan submitted by the EPC Contractor as per the directions of Engineer-In-Charge. Site Development Works (including survey, investigation, design and construction): Earth filling/Cutting :- Earth filling/Cutting of the locations of proposed buildings for ground area to be carried out to Finished Ground level (top level of adjoining road surface). Roads: a) Approach and internal road of the proposed Campus for construction with GSB/WMM layers and bituminous surface course :- 1000.00 Sqm. b) Parking Area with GSB & Paver Blocks :- 500.00 Sqm. Peripheral drains & Septic tanks: Survey, investigation, design, and construction of peripheral drains for the building, utilizing RCC/brick work for the approach/internal road :- Storm water Drain 2000.00 RM, Septic tanks as per CPWD specifications for the campus/buildings (nos. will be as per requirements or direction of Eng-In-Charge) :- Sewer Line-50m External Electrification: Supplying, installing, testing and commissioning led street for Road Area :- 17846 Sqm. (Road Area only), Transformer (01 Nos.) :- 200 KVA, DG Set :- 160 KVA. External water supply: External Water Supply Network withing campus :- 150 RM, UGT with pumping Facility :- 75000 Lts. Sports Activities Area- (i) Athletic Track/Football Field (Open)Providing and laying 400m Running Track (muddy/cinder Track surface) with the inside facility of FIFA approved Artificial turf made up of Tencate Thiolon UV protected polyethylene Monofilament of pile height 60 mm along with modular spectator stand. (ii) Squash Court Room (Covered)-Providing & laying squash court with finish of IPS/Wooden Floor/Glass Wall including marking on the surface/wall as per direction of the Engineer-in-Charge, (iii) Table Tennis Room (Covered)- Providing & laying court surface with finish of PVC Flooring including marking on the surface as per direction of the Engineer-in-Charge, (iv) Billiards- Providing & laying court surface with finish of PVC Flooring including marking on the surface as per direction of the Engineer-in-Charge, (v) Fitness Room - Providing & laying PVC flooring surface as per direction of the Engineer-in-Charge. Gym Equipment list :- 1. Cardio Tread Mills, 2. Bench Press, 3. Cycles, 4. Leg press, 5. Dumbells Set-2.5 to 40 kgs and Racks, 6. Table Tennis Equipment, 7.Billiard Equipment, 8. Shooting Range Equipment. SIGNAGES:- 1. Aluminum profile modular with digital printing, curve shape, color :- Silver, For wall mounting, 2. Door Name plate, Aluminum profile silver color, 3. Curve Shape modular profile both sided, Hanging through wire, 4. No Smoking Signage, 5. Wash Room Signage, 6. Information signage indoor, Flat profile aluminum with digital print, 7. Fire Exit Signage glow in dark, 8. Fire Hose Reel Signage, 9. Floor Number signage for stair, 10. Do not spit signage for common areas, 11. No Smoking signage for Common Area, 12. Way Finding Signage, 13. Outdoor signage led acrylic led letter.

Supply , transportation and fixing of 90W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / CROMPTON / BAJAJ / Surya / Ecolink / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / Capart / Fortune Arrt / Goldwyn / Panasonic / GM / Goldmedal / Silicon / Orient / HPL / Valmont / Transrail / Bee - Lite / Accent LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.\ System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED 90°C). 72 watt