Tripura Tender Results

Procurement of 1st category Stone aggregate (Nominal Size-12.5/ 20 mm /40 mm) at various worksites under Ompi and Karbook R.D Block under Gomati District, Tripura (2nd call).

Development of road from Mundabasti to Sheoratali L3.00 Km from Ch. 1.50 Km to Ch. 3.00 Km under PWD RandB Khowai Subdivision during the year 2026 27 SH WBM, Carpeting, Seal Coat, CC Block etc.

JJM Works Under Sepahijala District/ SH Construction of Cement Concrete platform , G.I. post including necessary fittings attached with DTW and SBDTW under Jampuijala R.D. Block with in

Development of road from Khowai Office Tilla to Champahour Road Via Ganki Food Godown L420.00 mtr. under PWD RandB Khowai Sub-Division during the year 2026 27 SH Earth work, GSB, WBM, BM, BC, protection work etc.

JJM Works Under Sepahijala District/ SH Construction of Cement Concrete platform , G.I. post including necessary fittings attached with DTW and SBDTW under Jampuijala R.D. Block with in the jurisdiction of DWS Sub-Division, Takarjala, Sepahijala

handle of size 8 inch, Round shape File with handle of size 12 inch, Flat shape File with handle of size 6 inch, Flat shape File with handle of size 8 inch, Flat shape File with handle of size 12 inch, Half round shape File with handle of size 6 inch, Half round shape File with handle of size 8 inch, Half round shape File with handle of size 12 inch, Ring Spanner Size 9 by16 x 5 by 8 inch, Material Alloy steel, Ring Spanner Size 7 by 16 x Half inch, Slugging wrench straight of size Opening 42 mm, Slugging wrench straight of size Opening 43 mm, Heavy duty socket 3 by 4 inch drive of size 38mm, Allen socket 3 by 4 inch square, Pencil grinder Carbide Bit, Needle File set of size 6 inch, Electric Drive Impact wrench 3 by 4 inch square drive Cordless, Electric Drive Impact wrench 1 by 2 inch, Electric Drive Impact wrench 1 inch, Chain pulley block Manual hoist of capacity 1MT, Length 3Mtr, Length 6Mtr, Chain pulley block Manual hoist of capacity 2MT, Length 3Mtr., Length 6Mtr., Chain pulley block Manual hoist of capacity 3MT, O-ring service kit Kit no 6, 7, 8 1 Box each, Spanner 1 Ring Spanner, Screw Driver 12 inch, Screw driver box, No of blade 6 nos, Conforming to IS 844-1979, Shim Cutter, Drill Machine, Bolt Extractor, Box Spanner set Half inch drive, Measuring Tap Steel of size 3 mtr, Chisel, Tap Handle Adjustable Tap reamer wrench handle, Long Nose Plier, total length 215mm, Combination Plier, total length 210mm, Hole Punch, Sizes, Screw Spanner of size 12 inch, 32mm hammering spanner for industrial use Slogging ring spanner confirming IS 4509-1992, Dial Gauge without stand Range 50mm, Outside micrometer 0-25mm, Dial Gauge without stand Range 0-10mm, HSS Taper Shank Twist Drill Bit size 5mm, HSS Taper Shank Twist Drill Bit size 5.5mm, HSS Taper Shank Twist Drill Bit size 9mm, HSS Taper Shank Twist Drill Bit size 9.2mm, HSS Taper Shank Twist Drill Bit size 9.5mm, HSS Taper Shank Twist Drill Bit size 10mm, HSS Taper Shank Twist Drill Bit size 12mm, HSS Concrete Bit of size 5mm, HSS Concrete Bit of size 5.5mm, HSS Concrete Bit of size 6mm, HSS Concrete Bit of size 6.5mm, HSS Concrete Bit of size 7mm, HSS Concrete Bit of size 8mm, HSS Concrete Bit of size 9mm, HSS Concrete Bit of size 10mm, HSS Concrete Bit of size 11mm, HSS Concrete Bit of size 12mm, HSS Concrete Bit of size 14mm Allen Key 9/16'', Black Finish.L-1= 140 mm, L2= 56mm, Conforming to IS 3082-1988, Allen Key 1/2'', Black Finish, L-1= 125 mm, L2= 45mm, Conforming to IS 3082- 1988, Allen Key (mm), 9 Pcs. Set (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm)Conforming IS 3082-1988, Allen Key (inch), 10 Pcs. Set (1/16", 5/64", 3/32" 1/8", .132", 3/16", 7/32" 1/4", 5/16" & 3/8"), Conforming IS 3082-1988, Steel Scale 24" Material: Stainless Steel Colour: Metallic, Width 25 mm, Thickness 1.0 mm. Style: Compact Graduation Range 0-24 Inches, 28 Blades Feeler Gauge, Range:-0.05 - 1.0mm, 28 leaves: 0.05mm - 0.15mm by 0.01mm, 0.2 mm - 1mm by 0.05mm Long leaf: Length:10 inch., Feeler Gauge strips of size 0.1 mm, Dimensions: 300mm in length, with 0.1 mm thickness clearly etched. Material: Durable stainless steel or 65MN steel to resist rust and wear., Feeler Gauge strips of size 0.2 mm, with 0.2 mm thickness clearly etched. Material: Durable stainless steel or 65MN steel to resist rust and wear., Thread Gauge 4 to 62 TPI, 0.25 to 6.0 mm combination with 55 Degree and Metric 60, HSS Round Drill Bit size- 2.5mm, Conform to IS 5101 - 1991, BS 328 : Part 1 : 1986, Flute Length:30mm, Overall Length:57mm, HSS Round Drill Bit size- 3mm, Flute Length:33mm, Overall Length:61mm, HSS Round Drill Bit size- 3.5mm, Flute Length:39mm, Overall Length:70mm, HSS Round Drill Bit size- 4mm, Flute Length:43mm, Overall Length:75mm, HSS Round Drill Bit size- 4.5mm, Flute Length:47mm, Overall Length:80mm, HSS Round Drill Bit size- 5mm, Flute Length:52mm, Overall Length:86mm, HSS Round Drill Bit size- 5.5mm, Flute Length:57mm, Overall Length:93mm, HSS Round Drill Bit size- 6mm, HSS Round Drill Bit size- 7mm, Flute Length:69mm, Overall Length:109mm, HSS Round Drill Bit size- 8mm, Flute Length:75mm, Overall Length:117mm, HSS Taper Shank Twist Drill Bit size- 6mm, Conform to IS 5103 - 1969, Overall Length:138mm, HSS Taper Shank Twist Drill Bit size- 6.5mm, Flute Length:63mm, Overall Length:144mm, HSS Taper Shank Twist Drill Bit size- 7mm, Overall Length:150mm, HSS Taper Shank Twist Drill Bit size- 8mm, Overall Length:156mm, HSS Taper Shank Twist Drill Bit size- 14mm, Flute Length:108mm, Overall Length:189mm, HSS Taper Shank Twist Drill Bit size- 17mm, Flute Length:125mm, Overall Length:223mm, Three Jaw Mechanical Puller. Capacity: 3 Ton, Max Reach: 120 mm, Max Spread: 140 mm, heavy duty. Shaft Dimension: Φ5/8"x11T, Length: 28mm, Min weight: 2.3kg. 3 jaws for easy positioning and self-centering. Self-centering function prevents the damage to the shaft and work piece being pulled., Screw Driver 18", blade length:450mm, overall length:577mm, Conforming IS 844-1979, Screw Driver 8", blade length:200mm, overall length:305mm, Mallet Hammer with handle, Total Weight:425gm, Hammer Height :90mm, Overall Length:272mm, Copper Hammer Head weight 800gm. Confirming IS 9064. Handle material: Ash wood with high durability, Copper Hammer Head weight 500gm. Confirming IS 9064. Handle material: Ash wood with high durability., Copper Hammer Head weight 3kg. Confirming IS 9064. Handle material: Ash wood with high durability., Socket 1/2" drive size- 13mm, Total Length:36mm, Forged from high grade Chrome Vanadium steel, Nickel Chrome plating finish for rust prevention, Conforming to IS 6131-1980 & 7381- 1986, Socket 1/2" drive size- 14mm, TotalLength:36mm, Conforming to IS 6131-1980 & 7381-1986, Socket 1/2" drive size- 16mm, Conforming to IS 6131- 1980 & 7381-1986, Socket 1/2" drive size- 19mm, Socket 1/2" drive size- 24mm, Ratchet Handle 1/2" drive. Confirming ISO 3315. Powerful 1/2" ratchet with a Overall Length: 255mm, Width: 35mm. Lock button for safe socket release and intuitive direction switch to change between left and right rotation. Curved neck shape for better handling and reaching into tight areas., Socket Size:3/4" drive hex 19mm confirming to IS 6131-1980 & 7381-1986 standards. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention., Socket size: 3/4" drive hex 22mm confirming to IS 6131-1980 & 7381-1986 standards. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention., Socket size: 3/4" drive hex 23mm confirming to IS 6131-1980 & 7381-1986 standards. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention., Socket size: 3/4" drive hex 24mm confirming to IS 6131-1980 & 7381-1986 standards. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention., Socket size: 3/4" drive hex 41mm confirming to IS 6131-1980 & 7381-1986 standards. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention., T- Handle 3/4" drive heavy duty confirming to IS 3315. Material: high grade Chrome Vanadium steel & Nickel Chrome plating finish to enable rust prevention. Length: 500mm, Extension Bar 3/4" drive heavy duty of size 6" length confirming to IS 7975. Material: high grade Chrome Vanadium steel., Ring Spanner of size 14mm- 15mm, Conforming to IS 2029-1998, Ring Spanner of size 16mm-17mm, Double Ended Open Spanner of size 10mm-11mm, Conforming to IS 2028- 2004, Double Ended Open Spanner of size 12mm-13mm, Conforming to IS 2028-2004, Grinding Machine, Rated input power:800 W, Speed output no-load:11000 rpm, Voltage, electrical:230 V, Power output:430 W, Grinding spindle thread:M10, Weight:1.7 kg, Switch:Back Switch Disc diameter:100mm Voltage, electrical:230 V Power output:430 W Grinding spindle thread:M10 Weight:1.7 kg Switch:Back Switch, Circlip Plier Inner 8", Total length :220mm, Bent, Conforming to IS 7989-1976(Int), Circlip Plier Outer 8", Total length :230mm, Straight, Measuring Tap (Steel) of size 5 mtr, Measuring Tap of size 30 mtr, Round shape File with handle of size: 6", total length:150mm, thickness:6.3mm confirming to ISO 234, Round shape File with handle of size: 8", total length:200mm, thickness:7.15mm confirming to ISO 234, Round shape File with handle of size: 12", total length:300mm, thickness:12mm confirming to ISO 234, Flat shape File with handle of size: 6", width:16mm, thickness:4mm confirming to ISO 234, Flat shape File with handle of size: 8", width:20.5mm, thickness:4.45mm confirming to ISO 234, Flat shape File with handle of size: 12", width:29.8mm, thickness:6.1mm confirming

Patch WBM, Grouting, Re-carpeting , seal coating, and road side drain etc

JJM Works Under Sepahijala District/ SH Construction of Cement Concrete platform , G.I. post including necessary fittings attached with DTW and SBDTW under Jampuijala R.D. Block with in the jurisdiction of DWS Sub-Division, Takarjala

ZEBRONICS PTZ Function Web Camera No Resolution (Maximum), ZEBRONICS PTZ Function Web Camera No Resolution (Maximum) each camera Full HD (1920 x 1080 Pixel)

JJM Works Under Sepahijala District/ SH Construction of Cement Concrete platform , G.I. post including necessary fittings attached with DTW and SBDTW under Jampuijala R.D. Block with in the jurisdiction of DWS Sub-Division, Takarjala

JJM Scheme in Boxanagar RD Block under Sepahijala District/ Construction of Cement Concrete platform , G.I. post including necessary fittingsattached to different DTW and SBDTW Schemes for FHTC under the

Renovation of different M.I. Schemes under Salema Block during the year 2026 27 S.H. Repairing of existing UPVC pipe line and priming tank etc.

MS Chequered Plate of 8 mm thickness

Running maintenance of different MI schemes under WR sub Division GondaTwisa during the year 2026 27 SH Repairing of PVC distribution system hydrant points sluice valve chamber priming tank etc.

Running maintenance of different M.I. Schemes under Dumburnagar Block and Raishyabari Block during the year 2026 27 S.H Minor repairing and maintenance of Pump motor suction delivery electrical equipment etc.

Minor maintenance of schemes Temp LI Nalchar Left Bank at West Nalchar GP LI Khandakarpara at Bagabassa GP of Nalchar RD Block under Water Resource Sub Division Melaghar during the year 2025 26 Replacement of old pump sets including panel board equ

Repair and maintenance of windows and ventilators including fixing of grills at the Medicine Block within AGMC and GBP Hospital premises, Agartala.

Improvement of road from Gonda Twisa- Raishyabari Road to Sadainanda para road (L - 4.218 km) under Dumburnagar RD Block, Gonda Twisa Sub-Division.

Minor maintenance of schemes LI Khedabari 2 LI Khedabari 3 at Khedabari GP of Nalchar RD Block under Water Resource Sub Division Melaghar during the year 2025 26 Replacement of old pump sets including panel board equipments

Construction of Vice_chancellors Bungalow, Guest House and Multi_facility Playground in the campus of MBB University at Agartala West Tripura under PM_USHA during the year 2025_26_Building portion including internal water supply, sanitary installatio

SH Construction of Rcc retaining wall L 26.00 Mtr. Flat Brick Soling L 70.00 Mtr.

Maintenance repairing of LI Rudijala scheme at Ward No 01 of Melaghar Municipal Council under Water Resource Sub Division Melaghar during the year 2025 26 Replacement of old pump set including panel board equipments

Unbranded Nylon Fabric School Bags

Mtc. of different roads under the Jurisdiction of 5th Circle, PWD(RandB)/ Hiring of MandM Scorpio for office of the Superintendent Engineer, 5th Circle, PWD (RandB), Jawharnagar, Dhalai Tripura during the year 2026-27 (Model not earlier than 2020).

Construction of attached toilet to the Principals chamber of Kendriya Vidyalaya Dharmanagar (Including septic tank) under RD Dharmanagar Division

MORBUS 3.7 Volt Lithium-ion Polymer Cell

Maintenance of Internal Electrification at Old Jail building for preparation of Jail cafe District Showroom and Aggregation Centre at Jail road Dharmanagar under RD Dharmanagar Division (2nd CALL)

Unbranded The Indian National Flag - Polyester Size 4 ( 1800 mm, Unbranded The Indian National Flag - Polyester Size 4 ( 1800 mm X 1200 mm )

TNPL 2.182 kilogram Ream of 500 Sheet 70 gsm A4 size Plain, TNPL 2.182 kilogram Ream of 500 Sheet 70 gsm A4 size Plain Copier Paper

Providing different types of Vehicles in good running condition along with service of Driver for the official use of various Officers Division Sub-Division for Eight months under control of the DGM, ED, Jirania.West Tripura

ACCESS Discrete L1 Fingeprint Scanner Registered Device for Aadhaar, ACCESS Discrete L1 Fingeprint Scanner Registered Device for Aadhaar Authentication

Please refer to the DNIeT

Please refer to the DNIeT

Construction

Maintenance of Priming Tank at different L.I. Schemes under WR Sub Division Manu LTV Dhalai Tripura during the year 2026 27 SH Mtc. of Priming Tank G.I. Priming line etc.

Minor maintenance of different MI schemes under 49 Chaw Manu ST Constituency within the jurisdiction of WR Sub Division Manu during the year 2026 27 S.H Rewinding of motor and other allied works.

Plaster work, Wood work, Painting, Water supply and sanitary installation and allied works.

Earthwork, C.C. work, R.C.C. work, Tiles work, Plaster work, Truss and G.C.I. sheet roofing etc.

Minor maintenance of different MI Schemes under 49 ChawManu ST Constituency within the jurisdiction of WR Sub Division Manu during the year 2026 27 SH Annual repairing of PVC distribution system hydrant points sluice valve chamber priming tank etc.

Please refer to DNIeT

Plaster work, wood work, Painting, water supply and Sanitary installation and allied works.

Please refer to DNIeT

Renovation of different M.I. Schemes under 49 Chaw Manu ST Constituency within the jurisdiction of WR Sub Division Manu during the year 2026 27 S.H Annual repairing of Pump motor suction delivery electrical equipments etc.

Please refer to DNIeT

Unbranded Sanitary Napkins Incinetator Machine with Smoke, Unbranded Sanitary Napkins Incinetator Machine with Smoke Control Unit

Please refer to DNIeT

AVISHREE Plastic L File Folder for 21.5 cm × 33.5 cm (Legal) size, AVISHREE Plastic L File Folder for 21.5 cm × 33.5 cm (Legal) size document

Unbranded 250 gram Laundry Soap

Hiring of vehicle

Colgate Type 1 : Fluoridated Toothpaste of 100 gm pack