Construction of motor room and providing painting to compound wall, ground levelling at UDA Colony ELSR in 63rd Division of Works Division-II

Engaging JCB with capacity of shovel of 0.85 Cu.m of 110 HP for Leveling the Site on hire basis including fuel charges, wages of driver and helper and all operational charges etc., complete as directed by the departmental authorities.

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove BMS-W.45

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete as directed by the departmental authorities.

Supply of CR sheet pressed section windows with hallow metal section frame of 65x40mm of 125mm thick (having centrally partition with F4B section) and shutter consists of I Section frame and 0.8mm thick vertically embossed or sheet providing guard bars of 12mm thick round M.S. bars at 110mm thick etc., and handles, stays etc., inclusive of one coat of red oxide premier etc., complete as per the direction of departmental authorities.

Supply and delivery of C.R.pressed section steel doors with frame of 100mm x 40mm thick shutter made of l.25 mm thick of C.R.Sheet having front sheet vertical embossing and rear side horizontal embossing both put together spot welding including cost and conveyance of all materials and including hold bushes M.S. exidished hinges tower bolts aldrop handles etc.complete as per the drawing including cost of red oxide premier etc.,complete as per the directions of departmental authorities.

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS for internal walls

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS for External walls

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Providing Sub base course with quarry rubbish (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.

Supply and Fixing of 25mm dia 1.8mm thick surface PVC Pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., Complete.

Wiring with 2 runs of 14/0.3mm (1.0Sqmm) Fire Retardant (FR) PVC insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, ceiling rose and module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc,. complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departmental authorities.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands ELEC-5.1.3

Supply of stepped type Electronic Regulator. Makes : As per list of recommended brands etc., complete as directed by the departmental authorities.

Supply and Fixing of 18W/20W 1200mm length LED Batten light with extruded Aluminium housing and poly corbonate cover input voltage AC 220-260 Voits with PF>0.9, Surge protection 2KV, THD <15 % with inbult driver and frosted cover CCT 3000K- 5700K, minimum CRI >70 etc., complete as directed by the departmental authorities.

Supply of 7.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, Makes : As per list of recommended brands. etc., complete as directed by the departmental authorities. MAT-03287

Providing Name board with embrossing letters including cost and conveyance of all materials and all labour charges etc;complete as directed by departmental authorities.