Providing and arranging necessary electrical works for installation and commissioning of 25HP Pumping Unit, including supply and fixing of sluice valves, NR Valves, Scour valve, 400mm DUI double flanged sluice valves, 200mm MS pipes, MS flanges, Motor Pedestals, 25HP Pump control panel and Engaging Hydraulic & JCB at GVR Nagar ELSR in 30th Division Circle-II Area

Supply of Altech DNO Enclosure suitable for accommodating 125A 3 Pole DNO/MCCB, made of heavy-duty polycarbonate/CRCA sheet, IP65 protection, complete with mounting plate, gland plate, door locking arrangement, hardware, and all accessories as required for installation

Supply of 200 A 415 v Lug Type Fuse Units with extension strip.as directed by the departamental authorities.Make: Anchor

Supply, Delivery and Fixing of 10 kVAR, 3 Phase, 440V, 50Hz, Heavy Duty Power Factor Correction Capacitor complete with all accessories, suitable for APFC Panel, including installation, testing and commissioning Make: l&k

Supply of 100A Neutral Link (415V, TPN Panel, Copper/Aluminium)

Supply of 125A, ISI Marked, 4 Pole On-Load Manual Change Over Switch, suitable for 415V, 3 Phase, 4 Wire, 50Hz AC supply, complete with sheet steel enclosure, front operating handle, copper terminals, and all standard accessories, conforming to IS/IEC 60947-3, including fixing, testing and commissioning.

Labour Charges for Fabrication, Erection, Wiring, Cable Laying, Glanding, Termination, Fixing, Testing and Commissioning of 30-Way MUG Panel Board, Changeover Switches, DNO Enclosure, Capacitor, Fuse Units, PVC Pipe, Cable Supports and all associated electrical accessories, including transportation, loading/unloading, tools & tackles, consumables and all incidental works, complete as directed by the departmental authorities.

Fabrication, supply, erection, testing and commissioning of 30-Way MUG (Meter Unit Group) Panel Board suitable for 415V, 3 Phase, 4 Wire, 50Hz AC supply, manufactured using 16 SWG CRCA sheet steel with powder-coated finish over rust-proof primer. The panel shall be dust and vermin proof, complete with hinged lockable doors, cable alley, gland plates, earthing studs, and suitable mounting arrangement.

Supply of Spreader Kit 3P DN0 125D MCCB (125A)as directed by the departamental authorities

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts,Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc. complete ISI marked. PN 1.6 (MPa).400mm Dia

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces.400mm Dia

Providing inter connection between to the existing pipe line and newly laid pipe line including of all necessary inter connection materials and washers and man mazdoorsetc.,etc., complete as directed by the departmental authorities. 400mm Dia

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.200mm Dia MAT-08049

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.DI Double Flange Duck/Foot bend 200 mm dia MAT-07947

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 150mm Dia MAT-08079

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 200mm Dia MAT-08080

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For MS FLANGES 200 mm dia. x 15 mm thick MAT- 06414

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 150 mm dia. x 15 mm thick MAT-06413

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 125 mm dia. x 15 mm thick MAT-06412

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 400 mm dia. x 18 mm thick MAT-06418

SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES.6 mm thick MAT-08261

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1").MAT-08262

Manufacturing, Supply, Delivery and fixing of M.S. pipe using with M.S. plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding etc., , complete.as directed by the departmental authorities.

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Manufacturing, Supply, Delivery and fixing of GI Pipe including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.MAT-00037. G I pipe 50 mm dia A class

Manufacturing, Supply, Delivery and fixing of GI Pipe including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.MAT-00037. G I pipe 200 mm dia A class

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.

Providing brick pedastals at pipe supportings, brick holes filling and Valve pit dismantaling etc., complete as directed by the departmental authorities.

Supply of Electrical motor pump set pullies - 2No.s including Foundry work and errection and Shifting of Electrical Pannal Boards at ELSR Booster in Sri Nagar including all materials and all labour Charges etc., complete as directed by the departmental authorities.

25HP Motor Pump Setting, Alignment With MS channales gas cutting at ELSR Pumping Room in GVR Nagar including all labour Charges etc., complete as directed by the departmental authorities.

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. ( depth upto 3 meters) DATA-2025 (WS)

Engagging Hydraulic Truck Crane 16T on Hire Basis for Lifting Sluice Valves, MS Pipes & Reducers etc including Cost & Conveyance of Fuel Driver & Helper etc Complete as Directed by the Departmental Authorities

Engaging JCB / Proclainer for clearing and cleaning of minor drains blockages connecting to major outfall drains

Engagging Hydraulic Tractor on Hire Basis for Carting away the Earth Material or Shifting of Material Debrise including Cost & Conveyance of Fuel Driver & Helper etc Complete as Directed by the Departmental Authorities