Supply and Delivery and Erection of 25HP Squrrel Cage Induction Motor and 25 HP Centrifugal Horizontal Split Casing Pump in Madhurangar ELSR Circle 2 Area

Supply and Fixing of Kirloskar make 18.5KW /25HP/1440RPM Squrrel Cage Induction Motor, 440V AC Supply, 50HZ, Three Phase Class F- insulation Foot Mounted, Crompton make including cost and conveyance of all materials and transportation etc., complete as directed by the departmental Authorities.

Supply of 25 HP Centrifugal Horizontal Split Casing Pump, UP 125/30A model, 180 Cum/hr discharge @25 Mts head, Rotating Assembly (EN8 Shaft, CI Neck rings, CI out side neck rings, CI packing glands, Cooling rings, 2 nos of pump ball bearings with bearing housing and packing housing, water seals & O rings) including cost and conveyance etc., complete as directed by the departmental authorities.

Supply and delivery of MS Fabricated base frame coupling with guard and foundation bolts and nuts for fixing of UP 125/30 A pump set and 25 HP Motor etc., complete job and as directed by the departmental authorities.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. For 200mm Dia (MAT-08080) (SSR 2026-2027)

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. For 200mm Dia (MAT-08049) (2026-2027)

Fabrication, supply, erection, testing and commissioning of 30-Way MUG (Meter Unit Group) Panel Board suitable for 415V, 3 Phase, 4 Wire, 50Hz AC supply, manufactured using 16 SWG CRCA sheet steel with powder-coated finish over rust-proof primer. The panel shall be dust and vermin proof, complete with hinged lockable doors, cable alley, gland plates, earthing studs, and suitable mounting arrangement.

Providing concrete for plain concrete (M20 Design mix) using 330 Kgs Cement 20mm, 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH. Providing Motor Bed and supports to valves and pipe line as directed by the departmental authorities.

Supply of Electrical motor pump set pullies - 2No.s including Foundry work and errection and Shifting of Electrical Pannal Boards at ELSR Booster in Sri Nagar including all materials and all labour Charges etc., complete as directed by the departmental authorities.

Erection of 20 HP coupled pump set, Panel board, sluice valves, Non return valve etc., and laying of cables Energy meter to Panel boards and Panel boards to Motors with PVC pipe casing and fixing of requred suitable copper lugs for cables and pump set trail run etc., complete as directed by the departmental authorities.

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1")

Supply of 400 A ISI marked 4 Pole Change Over Switch on Load with open Execution as per IS:13947. Makes: Legrand (Zucchini) / Schiender /C&S/Advance-Anant

Supply of 125A 4 Pole MCCB, 25 KA adjustable, confirms to IEC 60947-2 and IS 13947-Part 1 & 2, having Breaking Capacity with thermal magnetic release Panel Mounted. Makes: Lauritz Knudsen (formerly L&T) - D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno /ABB (Formula DSP)

Supply of 3 core, 6 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V conforming to IS 694:2010. Makes: As per list of recommended brands as category I