Providing 4Nos 12mtr High Mast to Improve the Illumination at various locations in Circle III area

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp. Makes: Bajaj / Valmont/ Laasma /Transrail/Utkarsh/ Skipper as per the approval of the departmental authorities.

Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc., complete as directed by the departmental authorities.

Supply and transportation of 25Sqmm X 3.5 core XLPE insulated,1100 V grade armoured alluminium cable as per specification confirming to IS: 7098 (part.1)./1554-1 Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt. As per directed by the departmental authorities.

Supply and Transporation of outer dia 50 mm and inner dia 38 mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard)/ Precision/CPE or its equivalent make. As per directed by the departmental authorities.

Supply and Fixing of "ZINDAL" or "TATA" make 40mm GI ‘B’ Class Pipe as per I.S 1239 ISI mark including cost and conveyance to work spot etc., complete as directed by the departmental authorities.

Earth work excavation for cable trench in all soils i.e., hard / loose ground soils and refilling of trench after laying of cable including all labour charges, sundries etc., complete as per directed by the departmental authorities.

Laying of U.G cable up to 50 Sqmm in trench / open area including inserting of cable in the HDPE DUCT including all labour charges & sundries etc., complete as per directed by the departmental authorities.

Engaging of Air compressor 7Cmm (Diesel) on hire basis including hire charges, fuel charges, crew charges etc., complete as directed by the departmental authorities.

Supply of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990.Makes: Finolex / RR kabel / Havells / Polycab/ Goldmedal as per directed by the departmental authorities.

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 25sqmm Makes:Dowels/ Jainson/ Comet as per directed by the departmental authorities.

Supply and Fixing of Automatic Street Light Control System with Optical Micro Sensor, Low volatage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs and contactor suitable to control the load of 8 KW of Three phase load with necessary clamping arrangements etc., complete of Make: Swadeep Nature Switch / Lightmate/ GL/Bajaj as per the approval of the departmental authorities.

Supply and transportation of 150W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Philips / Crompton / Bajaj / b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG as per the approval of the departmental authorities.

Fixing of LED Luminaires with 3 core cable and MCB's etc. excluding cost of materials including all labour charges, sundries etc., complete as directed by the departmental authorities.

Supply of 6-32A SP MCB10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) as directed by the departamental authorities.

Supply of 40-63A FP MCB 10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-Acti9 / L&T-AU as directed by the departmental authorities.

Supply of 63A 415V Porcelain Rewirable Fuse Units.Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / Benlo /Anchor as directed by the departmental authorities.

Supply, delivery and fixing of Three phase Service Meter ,suitable sintex Box including of Fuse Units.suitable clamp sets to electrical poles including bolts nuts,washers , Transportation, labour charges and incidental charges etc.compleet. As per site condition and as per directed by the departmental authorites.

Providing Service connection for Three Phase Meter including cost of Copper wire and tranco service connection charges including all Labour charges etc., complete as per directed by the departmental authorities.

Providing Plain Cement Concrete of M20 Grade Design Mix using 343Kgs. of Cement, 20mm,10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cost and conveyance of all materials and all labour charges for machine mixing, laying, tamping of concrete & curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Providing independent earthling by excavating a trench to a depth of 2.10 M in all soils, as per size specified in the approved data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete as directed by the departamental authorities.