Construction of Prayer room and Providing GI Roof Shed at Pathways Junction to Christian Burial Ground (Block-1) at Vambay Colony in 60th Division

Augoring and boring of holes in site for bored cast-in-situ RCC piles for building foundations in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment etc., complete for all depths and for finished item of work for piles of following diameters. Upto 300mm dia

Under reaming for bored cast-in-situ RCC piles for building foundations in loamy, clayey soils like black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augor bor drill and shell equipment etc., complete for all depths and for finished item of work for piles of following diameters. Upto 300mm dia

RCC M20 Design mix supply and placing of the design mix concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Piles

RCC M20 Design mix supply and placing of the design mix concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beam

RCC M20 Design mix supply and placing of the design mix concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Columns

Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including overlaps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete.

Collection and supply of dust for filling including cost and conveyance charges, spreading, sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220Kgs cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Providing concrete for plain concrete (M20 Nominal mix) using 330Kgs cement, 20mm, 10mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Brick Masonry work in CM (1:6) prop with Flyash cement solid blocks / Fal-G Blocks of size 290x150x140mm for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 50kg/sqm for walls for Superstructure walls.

Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per SS.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab including near cement slurry of honey like consistency spread @ 3.3Kgs per Sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work, but including the cost and conveyance of all materials. (600 x 600 of 8mm to 10mm thick)

Manufacturing, supply, delivery and fixing of MS pipe using with MS plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete and as directed by the departmental authorities. For trusses and purlins

Roofing with 0.5mm GI profile sheet of Standard make fixing with Necessary screws and washers etc., complete including cost and conveyance of all materilas and labour charges etc., complete. (BMS-W.45)

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.

Painting 2 Coats with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For Internal walls)

Painting 2 Coats with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For External walls)

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83A)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame (BMT-N.92)

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 28.60mm OD Pipe

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 22.20mm OD Pipe

Supplying & fixing 15 mm bib tap with flange Chromeum plated. (BMW-I.140)

Supply & fixing pillar cock Jaquar make Queen series with 7years warranty:Chrome plated (BMW-i.143)

Labour Charges for fixing of CPVC Pipe lines and drainage facilities at proper gradient including fixing with nails and all labour charges etc.., complete as directed by the departmental authorities. (LAB-00036)

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400mm - Single C.P. Pillar cock (BMW-D.24)

Engaging Labour for removing of Exsiting damamged shed waste materials, cleaning site and levelling including all labour charges etc., complete. For Mazdoors

Supply and fixing of 20mm dia 1.40mm to 1.55mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for switches for light fan and separate plug points including all labour charges etc., complete as directed by the departmental authorities.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 12 Module Horizontal/Vertical Cover Frame of recommended brands as per category I covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories (apsd-3.1.1)

Supply and Fixing of 18W/20W 1200 MM length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K, minimum CRI >70, etc complete of make PHILLIPS, LUMILEDS/ OSRAM/ SAMSUNG (sd)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.(apsd)