Replacement of Fire Alarm System at CH BSF Campus Salbagan under FTR HQ Tripura

Laying and Jointing PVC Pipe. Heading

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.a) speaker cable Single pair, 2-core, 1.5 sqmm

Providing & Fixing 8 Zone Conventional control panel, easy installation, operation, and maintenance, complying with IS 2189:1999 and IS 15908:2011 standards and tested by ERTL (N) with features 2 x 16 character backlit LCD display along with LCD and LED indications for open circuit, short circuit, isolate, and fire conditions in each zone. The panel supports a maximum of 25 detectors per zone and includes a lamp test feature to ensure all indicators are functional. Additionally, it provides both NO (Normally Open) and NC (Normally Closed) contacts for fire and fault alarms, making it a reliable and fully compliant solution for fire detection systems.

Providing & Fixing conventional photoelectric smoke detector complies with EN 54-7:2000 (Amendment 1) standards, LPCB and CE approved, ensuring adherence to international quality and safety norms. The detector features a low current draw, making it energy-efficient and suitable for a wide range of conventional fire alarm systems. It includes a bi-colour LED status indicator for clear visual identification of normal and alarm conditions, along with a remote alarm test feature for easy maintenance and periodic testing without manual activation. This detector provides dependable performance, safety compliance, and ease of integration in conventional fire detection systems.

Providing and fixing of On Spotfire Manual Call Point is an addressable break glass manual call point which hasa simple rotary decade switch at the rear of the unit for addressing. A specialist test key may be inserted into the bottom of the unit to lower theglass and release the micro-switch and thus a full functional test is achieved.The HM-MCP-GLASS Call Point is designed to provide a manualalarm interface to Morley IAS?s fire alarm control panel.Installation efficiency, compliance with the lateststandards are at the heart of the call point range

Providing and Fixing ASES Hooter, 100 db output, 24 VDC operated, ABS housing Model No. H–ABS–2 sounders are audio notification device used to alert trained personnel to investigate possible emergency situations and to take appropriate action during fire detection. Its made of hard PVC and is applicable for indoor use only. Comes with a factory fitted back box for surface mountmg or semi-flush mounting.

Add GST @18% on DSR'22 instead of 12 % |( multiplication factor = 0.0633 on total of item srl No. 01 to 02)

Add Labour cess @1% on total