General Fund

Cutting of open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Earthwork excavation and depositing and bank back side with an initial lead of 10m and initial lift of 2 m in all types of soils in loamy clayey soils like black cotton soils red earht and ordinary gravel Etc as per APSS and as per Engineering incharge.

Manufacture, Supply, & Delivery of 110mm dia HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.).(supply up to 90mm dia in coil & above 90 mm dia straight length of 6mts)MAT-07265

Dust filling in pipe line trenches with filling Dust including cost, seignorage and conveyance of all materials and all labour charges etc. complete as per APSS and as per directions of Engineer incharge.( Pipe top portion)

Lowering, laying, jointing & testing to HDPE pipes by Butt fussion welding true to alignment and gradiant including all sundries etc complete as directed by the department authorities. 110mm dia

Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P. Excluding all taxes.

110mm CID Joints

PIPE ENDS LONG NECK 110mm dia MAT-07475

100mm dia tee MAT-07546

110mm dia MS flange MAT-07493

110mm dia HDPE Bends MAT-07564

4" MS Dummy plate

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc. complete ISI marked. MAT-08069 100mm

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation. 50mm MAT-08093 PN 1.6

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces

Supply and Delivery of bolts and nuts with washers including conveyance and all taxes Etc. complete as per APSS and as per directions of Engineer incharge

Supply and delivery of 6mm thick rubber packing including conveyance etc, complete but excluding taxes.

Conveyance charges for excavated earth by head load 2km lead including initial leads lifts etc completed .

Bailing of water from pipeline trenches with oil engine driver pump sets including hire charges , fuel charges and wages for driver , helper etc. complete as per APSS and as per directions of Engineer incharge

Labour Engaged for Interconnection work including all charges complete as directed by the departmental authorities

Helper(Mazdoor)

Supply and Fixing of House Service Connections (HSCs) including all materials and labour charges etc,. Complete as directed by the departmental authorities.

S/D of 1/2" MDPE Pipe

1/2'' x 4'' long GI Nipples

1/2'' GI Elbows

3/8 Ferrule (super)

3/8x1/2'' Bushes

110mm x 1/2'' MS saddle MAT-08323

1/2" x3/4 " elbow