Complete rewinding and re-insulation of stator of 6.6 K.V, 215 K.W CGL make HT motor with slno NTVC 293058/1 in EM/CHP/STG.III/DRNTTPS.

Material charges: 1)Enameled Fibre glass covered varnish bonded Class 'H' Copper Strip

2)Semicatherm tapes

3)overhang tapes

4)wedges , top,middle, bottom liners , epoxy , binding sleeves , spacers

5) L&T make silver brazing rods & gas

6) semi conducting varnish , conducting varnish

Labour Portion : 1) Labour charges for complete rewinding of motor

Restacking of stator core (if necessary) 1) Materials for core plate varnish

2) Labour charges for restacking of stator core

Note:1. The firm has to quote their acceptable % excess/less on the above mentioned total amount for carrying out the subject work as & when required during the year 2026-27 as per the scope of work attached to this schedule

2. The statutory appliances EPF , ESI shall be reimbursed subject to production of proof of acquittances and limited to the rates & rules applicable from time to time.GST will be paid extra as per the rates & rules applicable from time to time.

3.If any deviation in quoting the tender by the tenderer will be liable for rejection

4. The standard field quality plan should be enclosed to the tender enquiry by incorporating the clause that ”the contractor should submit the FQP duly signed along with the tender schedule

5. FQP shall be approved by QC wing

6. The contractor should engage sufficient man power for completion of the work within time as instructed by the Engineer In charge without fail or else necessary action will be initiated

7)The scrap copper and other scrap material obtained from the old winding shall be retained by the contractor. In this connection, an amount of Rs.450/- per Kg plus applicable GST will be recovered from the bills and weight of the scrap copper is as mentioned below;In this case scrap copper 80% of weight will be (172Kg x Rs.450/- per Kg.) = Rs.77400/- + (18% of Rs. 72670)=Rs.13932/-. Total = Rs. 77400+13932=Rs.91332/-

CE/O&M/Dr.NTTPS