Construction of 01 No. 300 mm dia 150 mtr deep Tubewell and SITC of Submersible pumping plant for Sunkharikalan peyjal yojna in Vikas khand Sitarganj of Distt. Udham Singh Nagar under jal jeevan mission programme

Rates for Construction of 01 No. 300 mm dia 150 mtr deep Tubewell and SITC of Submersible pumping plant for Sunkharikalan peyjal yojna in Vikas khand Sitarganj of Distt. Udham Singh Nagar under jal jeevan mission programme.

Transporation of suitable truck mounted rig machine air compressor, OP unit, camp equipage, connected T&P and necessary accessories, casing pipe,tube well assembely housing pipe etc. including loading, unloding, creation and leveling of rig machine upto site of work etc complete in all respect as per direction of Engineer in charge required for drilling and development of TW

Erection & Levelling of rig machine at site of work

Drilling of 550 mm dia bore by heavy duty direct rotary Rig machine in alluvial, boulders, pebbles, rocky stone, sticky, clay etc from ground level upto entire depth for 300 mm dia linear assembely as per instruction of Engineer-in charge.

Procurement of TW assembly as below 300 mm dia MSERW plain pipe 7.90mm thick Blind & Threded

300 dia MSERW .Slotted pipe 7.90mm thick.

300mm dia Bail Plug

300mm dia M S well cap

300mm dia M S clamp with nuts & bolts

Supply of pea gravel of size 1.6mm to 4.8mm

Srrounding of pea gravel in between bore and tube well assembly upto entire depth of tube well ordered by the department

Prepairing & Lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as reqired at site complete with all T& P required Fixing of 300mm dia bail plug with nut & U - bolt

Lowering of 300mm dia MSERW housing pipe (Plain & Slotted pipe) as required

Fixing of 300mm dia, 8mm thick tube well cap

Fixing of 300mm dia, M.S.D.I housing clamp.

Dismantling of rig machine & clerance of site after satisfactory completion of work

Development of tubewell by 350 PSI/1400 CFM air compressor unit to the satisfaction of Engineering in charge to give sand free discharge and proper packing of pea Gravels at least for 70 Hrs.

Development of tubewell by the suitable submersible OP units complete with Lowering and lifting of pumping plant having 2000 LPM discharge approximate including running of OP unit and weld testing of tube well by v Notch atlest for 60 Hrs to the satisfactory completion of work.

Supply of Submersible pump & motor set of 350 LPM discharge, 50Mt. Head

Supply of Submersible spare pump & motor set of 350 LPM discharge, 50Mt. Head

Supply of Submersible copper cable size 1x3x16 sq.mm.

100mm dia. C.I. D/F Non Return Valves conforming to IS: 14846-2000 (kirloskar or equivalent)

Supply and fixing of Rubber Packing including all labour and T&P complete in all respect . 100mm. dia size

Supply and fixing of Nut-bolts different sizes including all labour and T&P complete in all respect .

Supply and fixing of main piping and valves of 100mm size having following items. Supply and fixing of 100mm dia x 5.6mm thick flanged column pipe in 3m length with inter-locking arrangement

Supply and fixing of 100x100x100mm dia C I flanged Tee

Supply and fixing of 100mm dia CI D\F bend

Supply and fixing of 100mm dia MS D\F pipe of 1.5M length

Supply & fixing of MS clamp 100 mm dia.

Supply of 100 mm round dial 0-10 kg/cm2 Pressure gauge with brass cock and fitting to mount bend.

Supply of Chain pulley block of 3.0Tonne capacity 4 Mt. lift spire gear tested on 4.5Ton load.

Supply of Chemical earthing material for plant including earth electrode, aluminium earth strip etc as per I.E. rules.

Supply & fixing of H.R.C main switch 3pole with neutral link in 100amp. 440voltage A.C.

Supply of Rubber Insulation sheet 1Mt.x2 Mt.x .025Mt.

Liquid Chlorine required for six month maintenance

Supply of Chlorine Testing Kit

Supply of special tools and spanners with 2 nos. chain wrinch

Installation, Commissioning & Testing of pumping plant and all accessories.

One month trial running & 5 months maintenance including watch and ward

Supply, installation, Testing and Commissioning (SITC) on turnkey basis for fully automatic pump automation control panels of different capacities having intelligent unit having "FIELD PROGRAMMABLE LOGIC CONTROLLERS based, SCADA operated pump motor start, Run, control, Protect against faults automatically operated control & management system" for supervisory control and data acquisition system at pumping water supply schemes & two years free of cost A.M.C. for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing including cartage from works of manufacturer upto site of work:-40HP

Supply, installation, testing and commissioning of three phase Electronic Automatic Voltage Stabiliser suitable for unbalanced voltage and unbalance load including fixing of proper size copper lugs on input and output cables on both ends at different sites on turnkey basis including five year cost free maintenance. Input voltage 280V/460V/240V(Three phase) Servo Voltage stabilizers (25 KVA)

Supply and fixing of Electric type of dosing system complete with solenoid ciol actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220 Volt single phase A.C. Supply along with chemical injection device and 100 Ltrs capacity of media tank complete with accessories.

shyam engineers