Replacement of AC Pipeline to HDPE pipeline in Ijjada Vari Street from Nethaji Street to Papayya vari Street in 24th Division

Cutting of CC road surface including water bound macadam including labour charges all lead and other incidental and operational charges and stacking of excavated materials etc., compelte and as per the directions of the departmental authorities.

Earthwork excavation and depositing on bank with an initial lead of 50mts and lift of 3mts in loamy and clayey soils like black cotton soils, red earth and and ordinary gravel as per SS 20-B. For pipeline trench 110mm dia. (By Mechanical means)

Earthwork excavation and depositing on bank with an initial lead of 50mts and lift of 3mts in loamy and clayey soils like black cotton soils, red earth and and ordinary gravel as per SS 20-B. For pipeline trench 110mm dia. (By Manual means) (Greater than 1 1/2 times the width)

Supply, delivery of HDPE pipes conforming to IS 4984-1995 including transportation to anywhere in A.P, excluding excise duty, sales tax and specials etc., complete. 100 grade 6Kg/Cm.Sq. (MAT) For 110mm dia HDPE pipeline

Supply and delivery of CID joints with drilled holes and with rubber rings, bolts and nuts etc., complete with suitable for above AC pipes of class 10 as per ISS Specification No. 8794/88 as amended from time to time including revision. For 100mm dia Class-5

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage including spreading, sectioning, watering etc., complete as per specification.

Supply and delivery of "Resilient Seated Soft Sealing" Gate valves (Sluice valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 or equivalent as per IS 1865, IS:3896-2 and wedge fully rubber lined with food grade quality grade W2100 grade EPDM, replaceable spindle nut without gland packing with 3-O ring protection system on the shaft and seals of NBR. The valves should be vaccum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with pocket less straight through body passage conforming to design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 100mm dia Sluice valve PN 1.0

Construction of masonary chamber suitable for above sluice valve including cost and conveyance of all materials and labour charges etc., complete as per approved type design. For 200mm dia

Lowering, keeping in position and fixing CI sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces etc., complete as per SS. For 100mm dia

Supply and delivery of CI flanged specials to site, confirming to IS: 1538-1993 of standard / non-standard inclduing cost and conveyance, packing, forwarding, tansit risk etc., complete but excluding all taxes and duties. SRP No.70 (MAT-07982)

Cost of MS Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to IS: 7322-1985 and flange dimensions confirmig to IS:1538-1993 excluding cost of MS barrel including cost and conveyance to site excluding taxes etc., complete. (Rate per each Flange) For 160mm MS Flange

Lowering, laying, jointing and testing to Hydraulic Field Test pressure including cost of water with minimum water lead of 500mts (Labour charges only) for HDPE pipe excluding cost of jointing materials and as directed by the departmental authorities.

Providing interconnection between existing pipeline and newly laid pipeline including of all necessary interconnection materials and washers and man mazdoors etc., complete. For 300mm dia to 160mm dia

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of the departmental authorities.

Supply and delivery of HDPE Specials of ISI make including cost and conveyance of all taxes etc., complete. For 160mm dia HDPE Colors

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500mts and testing to required pressure etc., complete. For 110mm dia

Conveyance of excavated earth for a lead of 4Km including loading, unloading, spreading, sectioning etc., complete and as directed by the departmental authorities.

Providing water supply House Service Connection including earth work, cost of material, labour charges, fitting charges etc., complete as directed by the departmental authorities. For House Connections

Providing concrete for plain concrete (M20 Design mix) using 343Kgs Cement, 20mm, 10mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete and as per drawings and technical specifications of MORTH.