Executive Engineer Circle-I works Division

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Dismantling of existing structures like culverts. bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD I MORTH(BW)

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement 40 mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including near cement slurry ofhoney like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to fulldepth mixed with pigment of matching shade including cost of all materials likecement, sand water and tiles etc., complete, including, complete for finished item ofwork, but including the cost of conveyance of all materials. (900x900 of 10 tol2mm thick)

Flooring with chequrred terrazzo tiles of 22mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab,including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.3

Brick Masonry work in CM (1:6) proportion with manufactured Fal-G Blocks of size 290 x 200 x140mm using flyash of 80kgs, cement of lskgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than Sokglsqm for walls for Superstructure walls.

Plastering for walls in CM (1:4)12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete

Conveyance of excavated earth with an average lead of 5 KM including loading, unloading etc., complete as per SS and also as per the directions of the departmental authorities

Roofing with corrugated GI sheets 0.80mm thick fixed with GI J bolts & nuts 8mm dia with bitumen & GI limpet washers filled with whitw lead & including a cpat of approved steel primer dand two coats of approved paint on over lapping of sheets complete (Up to a pitch of 60 degree) and seignorage cherges, etc complete excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials

Supply and delivery of GI square pipes including cost and conveyance etc., complete as directed by the departmental authorities

Labour charges for Fabrication and fixing in position including cost of welding rods etc., complete as directed by the departmental authorities

Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work (Windows: Double shutter 3-0' x 4-0(914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm) BMT-P.02

Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 "D" Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams! Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1 .2mm thick Skin pass Galvanized Iron sheet formed to single rebate profile of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush,double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 - 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with ThermosettingPolyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6MM clear float vision glass in Circular,Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter BMT-N.55

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work asper SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS INTERNAL TWO COATS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials. including cost and conveyance of all materials to work site and all operationa incidental labour charges etc., complete for finished item of work as per SS EXTERNAL TWO COATS

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module HorizontalNertical Cover Frame covering to switches/sockets control box incl

Supply of 1St 25mm outer dia medium grade with IS-9537 part 3 FRLS regid PVCpipe Makes: Precision/Universal& MarudharlVlP / GoldMedal I Million plast! GM ISudhakar /Polycab/Anchor/ Polyline/ Orbit! AKG( ELEC-1 .2.2)

Supply and fixing of 20-24W, not less than 1100m length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 300

Supply, delivery and fixing of TPN 8 way DB with IP-42 protection including all labour charges (ELEC-2.13.5)

Providing & Placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and areproduced in CTS (Copper Tube Sizes 1/2 to 2' Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compound shaving the same ph

Manufacture supply and delivery of CPVC fittings and specials for making necessary inter connections to the CPVC pipeline etc., complete as per didrections of departmental authorites

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable watersupplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as perspecification in light Grey/Natural Ivory Grey! Any other Color (exceptWhite)inclusive of tran

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage. where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Labour engaged on NMR basis for removal of waste material in the permisis of kitchen shed area complete as directed by the departmental authorities

Providing electrician for fixing of electrical items in the permisis of kitchen shed area complete as directed by the departmental authorities LAB-00005

Providing plumber for fixing of water supply items in the permisis of kitchen shed area complete as directed by the departmental authorities LAB-00036

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0. with remote and without Regulator. MAT-05508

Supply of 12' (300mm) Light duty exhaust fan with metallic blades and wire guard etc complete. MAT-03608

Supply of 2 Module Modular type electronic step type Fan Regulator. MAT-02846