Providing 5 No's of Toilets at Ambedkar Nagar Christian Burial Ground in 14th Division under AE-11 Section, Work Division-III. 2nd Call General Funds

Augoring and boring of holes 380mm Dia and above in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. For Piles 400mm dia

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. For Bulbs 300mm dia

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, s per SS - 20 B (APSS 308)

Supply and Delivery of Quarry dust from approved quarry including cost and convayence of all materials and labour charges filling sectioning spreading watering consoldation with PR etc complete as ss

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Providing VRCC M25 Mix using 20mm, size HG metal chips for approved quarry including cost and conveyance and 400 kgs. Cement per Cum. Of concrete for estimate purpose of all materials and labour charges for mixing, laying,tamping, centering, watering, curing etc., complete excluding cost of steel as per SS and authoritied (Rate will be paid based on the design mix if cement quality is reduced) For Piles

Providing VRCC M25 Mix using 20mm, size HG metal chips for approved quarry including cost and conveyance and 400 kgs. Cement per Cum. Of concrete for estimate purpose of all materials and labour charges for mixing, laying,tamping, centering, watering, curing etc., complete excluding cost of steel as per SS and authoritied (Rate will be paid based on the design mix if cement quality is reduced) For Footings

Providing VRCC M25 Mix using 20mm, size HG metal chips for approved quarry including cost and conveyance and 400 kgs. Cement per Cum. Of concrete for estimate purpose of all materials and labour charges for mixing, laying,tamping, centering, watering, curing etc., complete excluding cost of steel as per SS and authoritied (Rate will be paid based on the design mix if cement quality is reduced) For Plinth Beam

Providing VRCC M25 Mix using 20mm, size HG metal chips for approved quarry including cost and conveyance and 400 kgs. Cement per Cum. Of concrete for estimate purpose of all materials and labour charges for mixing, laying,tamping, centering, watering, curing etc., complete excluding cost of steel as per SS and authoritied (Rate will be paid based on the design mix if cement quality is reduced) For Coloumn

Providing VRCC M25 Mix using 20mm, size HG metal chips for approved quarry including cost and conveyance and 400 kgs. Cement per Cum. Of concrete for estimate purpose of all materials and labour charges for mixing, laying,tamping, centering, watering, curing etc., complete excluding cost of steel as per SS and authoritied (Rate will be paid based on the design mix if cement quality is reduced) For Slab

Providing concrete for plain concrete (M20 Nominal mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Brick work CM (1:6) using 2nd class bricks including cost and convayence of all materials and labour chargs mixing laying tamping watering etc complete as per SS.

Plastering for Walls in CM (1:4) 12 mm thickincluding cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete inside

Plastering CM (1:4) 20 mm thick including cost and convayence of all materials and labour chrgs mixing laying tamping watering etc complete

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets+B109 and over flow pipes but without fittings & base support for tanks

Providing priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials and labour charges etc complete as for finished item of work.

Painting Two coats with plastic emulsion paint approved Grade-1 brand and shade over coat apply for new excavated walls including cost and convayence of all materials and labour charges etc., complete as directed by the departmental authorities Intrenal walls

Painting Two coats with plastic emulsion paint approved Grade-1 brand and shade over coat apply for new excavated walls including cost and convayence of all materials and labour charges etc., complete as directed by the departmental authorities. (External walls)

Flooring with Ceramic tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(600x600 of 8mm to10 mm thick )

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per Sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S'trap with dual flush porcelain cistern fixed on EWC with allinternal parts of dual flush cistern, ultra solid seat cover ofapproved make with rubber buffer and cap 15 mm angle stopcock 450 mm long PVC inter connection pipe wall flanges allof approved make etc. complete for finished item of work in allrespects:white Colour

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia including cost and conveyance as directed by the departmental authorities

Supply and fixing of Health faucet with all required accessories including all labour charges etc., complete for Sudhakar makeas per directions of the deportmental authorities .

S & F CP long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make including cost and conveyance as directed by the departmental authorities

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty

Supply , Delivery and fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials and labour charges etc., complete

Supply & Fixing of ball valve with including cost and conveyance as directd by the departemenal authorities

Supply & Fixing of brass elbow with including cost and conveyance as directd by the departemenal authorities

Supply & Fixing of 50mm T with including cost and conveyance as directd by the departemenal authorities

Construction of 0.45 x 0.45 M (1'6" x 1'6") Inspection Chamber depth varying from 0.30 Mt. to 0.60 Mt. with a slope of 30mm in the channel along with sewer lines as per the approved departmental drawings including earth work excavation and laying of C.C M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing coverslab of 75mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)

Supply and delivery of 110mm dia PVC 6KG/CM2 including cost and conveyance of all materials and labour charges etc., complete as per SS

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 22.20mm ODPipe - SDR 13.5

Supply, delivery and fixing in position of GI profile sheet colour coated sheet roofing with G.I. 'J' bolts of suitable length with nuts and watchers etc., with overlap of not less than 15mm in length the shed below along with roof slope and side lap kept at a minimum of two corrugation including providing ridge piece with AC sheets as directed by department including cost of AC sheets, 'j' bolts, nuts and all labour charges for fixing in position etc., complete for finished item of work.

Manufacturing, Supply, Delivery and fixing of M.S. pipe using with M.S. plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding etc., , complete.as directed by the departmental authorities.

Supply and Fixing of 25mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Wiring with 2runs of 14/0.3mm pvc(1.0 Sq mm) insulated flexible copper cable in the existing pipe with 6a switch ceiling rose 3mm thick hylam sheet covering to switch controle box inculding all labour charges etc., complete for light fan bell and Exhaust fan points for finolex /RR Cables of make.as directed by the departamental authorities

Supply and fixing of Anchor Roma make Modular swithes, regulator inculding alllabour charges etc. Legrand/schneider/MK/ GM make.as directed by the departamental authorities. For 6/10 Amps one -way Swithes

Supply and fixing of Anchor Roma make Modular swithes, regulator inculding alllabour charges etc. Legrand/schneider/MK/ GM make.as directed by the departamental authorities. For 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=80 lumens/watt , PF>0.9, Surgeprotection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70,etc., complete with earth connection and not less thantwo years warranty.

Supply , Delivery and fixing of 1.00m dia RCC Well Rings 50mm thick including cost and conveyance of all materials and labour charges etc., complete

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal sizeC.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock

Supply , Delivery and fixing of 1.00m dia RCC Well Rings cover 50mm thick including cost and conveyance of all materials and labour charges etc., complete