Loading…
Loading…
Tender Value
₹14.2 L
EMD Value
₹14,200
Closing Date
2 Apr 2026, 5:15 pmClosed
Similar tender results from the same govt authority in the past 3 years.
VIJAYAWADA MUNICIPAL CORPORATION
VIJAYAWADA
Providing toilets and Bathrooms to Muslim Burial Ground in Eluru Road 25th Division Circle-2 Area
918121
Rc.E11-117875/2025
OPEN - NCB
Civil Engineering Works
NTR
5 documents required · 4 mandatory · 1 optional
₹502
₹14,200
26 Mar 2026
26 Mar 2026
26 Mar 2026
Engaging hydraulic tractors on hire basis for conveyance of dismantled material upto a lead of 8 Kms including cost of fuel, wages for driver including loading, unloading etc., complete as directed by the departmental authorities
Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. For 300mm dia piles
Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. For Up to 300 mm dia
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308)
Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete
Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.
Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.
Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete
Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.
Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.
Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.(BMT-N.06)
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap etc., complete. MAT-01789
Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. LAB-00168
Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
MAT-07652 (110mm Dia)
MAT-07650 (75mm Dia)
Urinal push cocks
Nylon connections
Waste couplings
Steel jollies 5"
11/4" PVC E lbows
21/2" nany traps
1" tank nipples
3/4" x 1/2" brass elbows
3/4" plain elbows
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
28.80mm ODPipe - SDR 13.5 BMW-I.222
15.90mm ODPipe - SDR 13.5 BMW-I.220
22.20mm ODPipe - SDR 13.5 BMW-I.221
Supply & Fixing of CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make etc., complete as directed by departmental authorities.(BMW-E.22)
Supply & Fixing of NP soap dish heavy type with NP SCREWS etc., complete as directed by departmental authorities. (BMW-I.28)
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.6Kg/Cm.Sq MAT-07655 For 160MM CHASSING
Construction of 0.60 x 0.60 M (2' x 2') Inspection Chamber depth varying from 0.60 Mt. to 0.90 Mt. with a slope of 30mm in the channel along with sewer lines as per the approved departmental drawings including earth work excavation and laying of M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing coverslab of 75mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)
Plumbing and drainage charges including all labour charges etc.,complete as directed by the departmental authorities.
supply and delivery of 4model Surface board with plate including all materials and labour charges etc.,complete.
supply and delivery of 3model Surface board with plate including all materials and labour charges etc.,complete.
Supply of 6A, 1 Way flush type Switch.ISI marked.Makes: As per list of recommended brands.including all materials and labour charges etc.,complete.
Supply of not less than 1100mm length, Box type powder coated tube light luminaire with necessary wiring suitable for fixing 2 Nos retrofit T8 LED tubes but without tube and choke.Makes: As per list of recommended brands as Category-I. including all materials and labour charges etc.,complete.
supply and delivery of Pendent Holder / Adopter including all materials and labour charges etc.,complete.MAT-02820
Supply and fixing of 9W heavy duty LED Down lighter, suitable for Recessed / Surface mounting made of pressure diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II. MAT-03300
Supply of 1.0 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 including all materials and labour charges etc.,complete.ELEC-1.5.2 MAT-02755
supply and delivery of 2.5 Sq mm copper wire ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 including all materials and labour charges etc.,complete.
supply and delivery of 20 mm outer dia (1.95 - 2.10) mm thickness PVC pipe including all materials and labour charges etc.,complete. MAT-02673
Supply and Transportation of1 HP Mono block motor Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 including all materials and labour charges etc.,complete Makes: As per list of recommended brands as category II. ELEC-5.4.12 MAT-03703
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
for 200mm dia 10Kgs/cm2 - MAT-07657
for 315mm dia 6 Kgs/cm2 - MAT-07661
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. For 50mm dia PN 1.6
Manufacture, Supply and Delivery of DI/DF Gate valve (soft seated ) resilient seated soft sealing gate valves (sulice valves ) with body bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S 3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality . and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4.all the valves should be Electrostatic powder coating both inside and outside pocket less body passage .Drilled as per IS 1538. PN 16 For 80mm dia PN 1.6
Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to is:7322-1985 and flange dimensions confirming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site, vat etc., complete as per ss
50 mm dia - MAT-07489
100 mm x15 mm dia - MAT-06410
Supply and delivery of 50mm dia, two sides threading GI Pipe B-class Jindal or TATA make including cost and conveyance of all materials and labour charges etc complete as per directed by the departmental authorities
Supply and Delivery of GI Speials including cost and conveyance of work site etc., complete as directed by the departmental authorities
50mm dia Couplings
50mm dia x 90 degres GI bends
50mm dia X 9'' Long GI Nipples
50mm dia X 100 mm dia GI Reducer
Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well 350mm dia for insertion of pipe dia of 200 mm
Supply and delivery of Bentonite powder including cost and conveyance of all materials and labour charges etc. complete as directed by the departmental authorites. MAT-00235
Providing of filter point to 200mm PVC pipe including making charges excluding cost of pipe etc., complete as directed by the departmental authorities
Supply and Transportation of 5.00HP, 12-16 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. MAT-03657
Supply of 3 Core, 4 sqmm, Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990.Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/Goldmedal/GM (ELEC-1.6.3 C) - MAT-02796
Supply of 100A 415V Porcelain Rewirable Fuse Units. Makes : As per list of recommended brands MAT 02946
Supply of 100A Neuter Links including cost and conveyance of all materials etc,. Complete as directed by the departmental authorities MAT-02940. For 100AMPs Neuter Links
Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. etc,. Complete as directed by the departmental authorities. - MAT-03951
Inserting charges for 50mm dia GI pipes, Submersible pump sets and specials including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorites.
Supply and fixing of 3'' x 3' long size clamp sets including cost and conveyance of all materials etc., as directed by the departmental authorities
Manufacture, supply,& delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply up to 90 mm dia in coil & above 90 mm dia straight length in 6 M.) for 110mm dia
Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification.
Pipe Ends Long Neck. 110 mm dia
M.S. Flanges. 110 mm dia
Earth work excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench
Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.
Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure complete as directed by the departmental authorities. For 110mm dia HDPE pipe
Manufacturing, Supply, Delivery and fixing of M.S. pipe using with M.S. plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding etc., , complete.as directed by the departmental authorities.
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) For 100mm dia
Providing inter connection between to the existing pipe line and newly laid AC pipe line including of all necessary inter connection materials and washers and man mazdoors etc.,etc., complete as directed by the departmental authorities.
Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.
Supply, delivery and fixing of Milton Roy liquid Chlorine doser Model No. UC 11 with warranted and free from any manufacturing defects including fixing as directed by the departmental authorities.
Supply, delivery and fixing of 50 Ltr Capacity Storage PVC Tank with cap as directed by the Departmental Authorities.
Supply and Delivery of 300 V Stabillizer as directed by the departmental authorites.
PVC box suitable size including angles to fix the box with angles, concrete and electrification as per the requirement in site, wiring with 1/18 copper wire including earthing etc., as directed by the Departmental Authorities.
Electrical wiring in PVC Box with 2 Pole MCB's, On & Off Switches, 3 Pin Socket and 1 Square mm Copper wire including instalation pipe as per requirement in site to Run the Dosing Pump as directed by the Departmental Authorities.
Fabrication, Supply and Erection of Metallic Box of size 0.45 Mts x 0.45 Mts x 0.75 Mts with 10mm Square Rod inside support and bottom 10mm Rod 3 No’s and Legs painting with Enamel Paint 10 cm size including earth work fixing with concrete and locking arrangement etc., to protect the liquid chlorine can.
Supply and Delivery of 3/8 PU Tube heavy duty to connect Dosing Pump and Water Line etc., complete. as directed by the Departmental Authorities.
Labour Charges for Errection and commencing of Dosing Pump including fixing of metallic box earthing etc., complete.
Supply and delivery of Liquid Chlorine with 10% to 12% Concentration of Chlorine including transportation, loading, unloading, delivery at water works (excluding cost of cans) etc., complete for the maintenance of water supply as directed by the departmental authorities.
Construction of bore well platform of 1.85 m dia and 3.00 m length drain and foot rest of 1.00 x LOU m with CC (1:2:4) using 20 mm H8G metal including cost and conveyance of all materials labour charges, centering, curing, seigniorage charges & excluding taxes etc., complete as per UNICEF type design.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ-117875-2025.xlsx
TENDER_DOCUMENT • 0.03 MB
NIT-117875-2025.doc
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid