Loading…
Loading…
Tender Value
₹10.0 L
EMD Value
₹10,000
Closing Date
2 Apr 2026, 4:25 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer-III
Executive Engineer-III,Patamata,VMC
Providing 160mm dia HDPE Pipe Line from Donka Road to Padmaja Nagar and 110 mm dia HDPE Pipeline to Cross Roads in 13th ward of Works Division-III. 6th Call General Funds
918831
Rc-E4-102539/2026
OPEN - NCB
Civil Engineering Works
NTR
6 documents required · 6 mandatory
₹354
₹10,000
30 Mar 2026
30 Mar 2026
30 Mar 2026
Earth work in excavated for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and brcking, removal of stumps and other deleterious material and disposal upto a lead of 50mts dressing of sides and bottem and backfilling intrenchs with excavated suitable material as per technical specification 305 MORD/304 MORTH
Cutting of C.C. surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.
Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) For 160mm dia
Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) For 110mm dia
Lowering, laying, jointing & testing of HDPE Pipes by butt fusion welding as per IS 7634-part-II/1975 as ammended from time to time to the alignment and gradient and testing the pipeline to required pressure For 160mm dia
Lowering, laying, jointing & testing of HDPE Pipes by butt fusion welding as per IS 7634-part-II/1975 as ammended from time to time to the alignment and gradient and testing the pipeline to required pressure For 110mm dia
Supply and delivery of Quarry Dust filling from approved source including cost, seignorge charges and conveyance of all materials including all labour charges for filling, sectioning, watering and ramming etc., complete as per S.S
Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide ,two coats of anty corrosie paint including cost of material, cutting ,welding, bending, and fabrication charges, including transportaion, loading, unloading,at work spot.as directed by the Dept. Engineer-in- chrge CED and other taxes, etc complete
Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 150 mm dia. x 15 mm thick
Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.
Bailing out of water from Pipe line trenches with oil driven pump sets, including hire charges, fuel charges for driver & helper etc complete
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 150mm dia PN-1.60
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 100mm dia PN-1.60
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces For 150mm. dia
Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces For 100mm. dia
Construction of Masonary Sluice Valve pits suitable to the sluice valves of size from as per TD No. 4/1941. For 100mm dia
Construction of Masonary Sluice Valve pits suitable to the sluice valves of size from as per TD No. 4/1941. For 150mm dia
Bailing out of water from Pipe line trenches with oil driven pump sets, including hire charges, fuel charges for driver & helper etc complete
Providing inter connection between to the existing pipe line and newly laid pipe line including of all necessary inter connection materials and washers and man mazdoorsetc., etc., complete as directed by the departmental authorities. For existing 250mm HDPE pipe line to proposed 160mm dia HDPE pipe
Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 40mm,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Providing laying spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadam specification 5th Rivision as per table 400-13 including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to acheive the desired density etc. as directed by the Engineer-in-Charge and as per MORT & H specification 406( 5th rivision) for finished item of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1-NIT- 102539-2026.doc
TENDER_DOCUMENT • 0.06 MB
BOQ- 102539-2026.xls
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid