Construction of 2nd Floor over the existing G+1 Building of New Zonal Office to facilitate the offices functioning in the Old Zonal Office, Vidyut Soudha premises, Vijayawada (3rd Call)

Dismantling of existing cement concrete by mechanical means including T&P and scaffolding wherever necessary, sorting the dismantled material. disposal of unserviceable material and stacking the serviciable material with all lifts and lead of 1000m, labour charges, complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris 100M away from the site with labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling Steel Work in all Types of Sections Including dismembering as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m away from site including all labour charges, all leads and lifts, cost of T&P for finished item of work as directed by the Engineer-in - charge .

Removal of existing Stainless steel 304 grade normal/glazed hand railing of any sections without causing any damage before starting of construction & Refixing the same after completion of construction including all labour chages, all leads & lifts, all T&P charges and any unforeseen charges etc., complete for finished item of work at all levels of the building as directed by the Engineer-In-Charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) First Floor a) Roof Slab

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Second Floor a) Columns

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Second Floor b) For Lintels

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Second Floor c) For Sunshades

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Second Floor d) For Roof Beams

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Second Floor e) For Roof Slab

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Third Floor a) For Columns

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Third Floor b) For Roof Beams

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using concrete Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum) For Third Floor c) For Roof Slab

Supply and Fixing of 180 GSM LDPE sheet of approved make over slabs and beams centering before placing of Steel reinforcement to avoid slurry leakage and to avoid honeycomb, including labour charges for laying the sheet neatly, cutting and jointing the sheet properly with overlapping of 20cm at joints with Fevicol & Tape and for tying in position with binding wire, removing sheet while removing the centering including cost & conveyance of all materials, tools at all leads and lifts etc complete as per the directions of the Engineer in charge for the finished item of work.

Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 of size 600 x 200 x 150 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . (a) For Ground Floor

Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 of size 600 x 200 x 150 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . (b) For First Floor

Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 of size 600 x 200 x 150 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . (c) For Second Floor

Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 of size 600 x 200 x 150 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . (d) For Third Floor

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. A) Second Floor

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. B) Third Floor

Plastering with CM (1:5), 20 mm thick to the Uneven wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. A) Second Floor

Plastering with CM (1:5), 20 mm thick to the Uneven wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. B) Third Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. a) Ground Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. b) First Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. c) Second Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. d) Third Floor

Laying of Plain Cement concrete - Nominal Mix (1:2:4) with 12 to 20mm HBG metal for dummy columns at terrace including cost and conveyance of all materials, all labour charges, all Steel shuttering charges, all leads and lifts of materials, shuttering materials to terrace, machine mixing charges, curing etc., complete for finished item of work as directed by the Engineer-in-charge.

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Plain Cement concrete - Nominal Mix (1:3:6) with 20 to 12mm (50% each) HBG metal (HAND MIXING) for Fixing hold fasts in Brick walls including cost and conveyance of all materials, labour charges, water lead, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost & conveyance charges of all materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor. a) For Second Floor

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m. For heights from 7.32m to 10.98m above GL

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt - 2 Nos., 6” D handles - 2 Nos., 10” Aldrop - 1 No., Butt Hinges - 6 Nos, Mortise Lock of approved quality - 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work. for Double leaf Door

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-3: for width of doors 851 to 1000 mm) including cost & conveyance of all materials, all labour charges, all leads & lifts etc., complete for finished item of work as directed by the Engineer-In-Charge.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size of 45x75MM (ISI Make) with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control handdrilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. and fixing with 28-30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum (ISI Make). shutter will be fixed to the frame using 3 inch hinges. A minimum of 4 hinges will be required including cost of fixtures like 4Nos. Aluminium Butt hinges (IS:205)- 75 mm , 2Nos. MS-Powder Coated Door Handles (IS:208) 150 mm, 1No. Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm and 1No. MS-Powder Coated Aldrops (IS:2681) 200 mm, cost and conveyance of all materials, labour charges for fixing, Transportation etc., complete for finished item of work and as per the directions of the Engineer-in-charge

Providing and fixing factory made uPVC white colour fixed glazed windows /Ventilators comprising of uPVC multi-chambered frame and mullion (whereever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape&size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion(if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge inclusive of cost of Single / double 5mm thick glass panes and silicon sealant. Fixed windows / Ventilators made of (small series) frame 47x50mm & mullion 47 x 68 mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double 5mm thick glass panes, wire mesh and silicon sealent for Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminum glazed partitions using 10 MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as per the directions of the Engineer-In-Charge.

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. a)For Second Floor

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. a)For Second Floor

Flooring with Non-skid full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of approved colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. a)For Second Floor

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. a)For Second Floor

Flooring, Skirting and cladding with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials complete as per the directions of the Engineer in charge for the finished item of work. a)For Second Floor

Half Rounding the edges of Granite stone slabs of all thicknesses including polishing the same including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer-In-Charge.

Painting to new walls and ceiling with SINGLE COAT of appropriate cement primer of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 For Roof slab above false ceiling area. a) For Second Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (a) For Second Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (b) For Third Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (a) For Ground Foor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (b) For First Foor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (c) For Second Foor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (d) For Third Foor

Painting to new walls with 1 coat of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over the old existing acrylic exterior emulsion paint to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (a) For Ground Floor

Painting to new walls with 1 coat of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over the old existing acrylic exterior emulsion paint to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (b) For First Floor

Providing and fixing of false ceiling in true horizontal level 600 mm x 600 mm, 15 mm thick Mineral Fibre sheet 600 x 600 of fissured-ANF (Board / Tegular) Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stiched cross tee of size 24 x 27 mm at evry 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete as per the directions of the Engineer in charge for the finished item of work. ( Recommended brands: ARMSTRONG, Insula etc)

Supplying and fixing of sun control film to the glass openings of PLCC room including cost & conveyance of all materials, labour charges, leads, lifts etc, complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Providing stainless steel hand railing with 304 Grade stainless steel sections using 48.26mm OD pipes/ squares as stiles/ verticals at required intervels, 48.26mm OD pipes / squares as hand railing/ top sloped member and 3 Nos 17.145mm OD pipes/ squares as intermediate members or any other hand railing design specified by the Engineer in Charge including fabrication of stainless steel railing works using stainless steel welding rods, buffing, polishing, lacquer finishing for seamless finish including fixing the verticals by drilling the holes in the concrete/ granite/ tiled floor, grouted with suitable Resin anchor grout such as Lockfix-S of Fosroc or any equivalent chemical including cost of all materials and labour charges for finished item of work as approved and directed by the Engineer-In - Charge.

20 mm thick plain cement mortar bands in cement mortar 1 : 4 (1cement : 4 sand) upto 300 mm in width including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Supply & fixing of Galvanized Roofing Deck sheets with 1mm thickness, Coating: Zinc coating Z125 / Z275/ Z 500 GSM. Yield Strength: E250. crest to crest width 130 mm length 12 meters : profile width 982mm and profile depth 44mm CR steel as per IS-513 HR steel as per IS 1079 and Galvanized Steel as per IS 277 including cost & conveyance of all materials, Labor charges for fixing Galvanized Roofing Deck sheets to structural beams and columns for laying RCC slab, all leads & lifts, nuts & bolts etc., complete for finished item of work at all levels of the building as directed by the Engineer-In-Charge.

Cutting Cores in 125 mm thick RCC Slabs of 150 mm dia. Including cost & conveyance of all machinary, all labour charges, all leads & lifts etc., complete for finished item of work at all levels of the building as directed by the Engineer-In-Charge.

Cutting Cores in 125 mm thick RCC Slabs of 100 mm dia. Including cost & conveyance of all machinary, all labour charges, all leads & lifts etc., complete for finished item of work at all levels of the building as directed by the Engineer-In-Charge.

Supply & fixing of 9 Ply - 12 mm thick Plywood(IS:303) MR Grade to structural beams and columns to form as a false flooring including cost & conveyance of all materials such as plywood, screws, all labour charges, all machinary charges, all leads & lifts and excluding cost of structural beams and columns etc., complete for finished item of work as directed by the Engineer-In-Charge.

Removing of existing 6 mm thick UV resistant multi-wall polycarbonate roofing sheets without damaging including all labour charges, all leads & lifts, all T&P charges etc., complete for finished item of work at all levels of building as directed by the Engineer-In-Charge.

Fixing of old UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick including all labour charges, all leads & lifts, all T&P charges and excluding cost of poly carbonate sheet cost , nuts & bolts etc., complete for finished item of work at all levels of building as directed by the Engineer-In-Charge.

Supplying & Fixing 580mmx440mm Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark and 10 Liters capacity Single Flush PVC low level Cistern parry ware, slim line with internal components & short bendand complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.

Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed flat back Bowl urinal basin (Indian type) of size 440x 265x 315mm of HSW/ Parry/ Neycer make including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed URINAL PARTITION (Division Plate) of Hindware /HSW/ Parryware/ Neycer make of size 690mm long and 325mm wide including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 19.05mm dia and 609.6mm long C.P. Towel rod of Ist quality including cost of brackets as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing NP Soap dish heavy type with NP Screws including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (a) 34.9 mm OD pipe SDR 13.5

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (b) 28.6 mm OD pipe SDR 13.5

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (c) 22.2 mm OD pipe SDR 13.5

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. (a) 32 mm dia Nominal Bore

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. (b) 25 mm dia Nominal Bore

Supplying and fixing long body C.P. Taps including cost and conveyance, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing 101.6 mm dia PVC Nahani Trap/Floor trap of standard make including making connection to PVC pipes/waste water lines with cement concrete base for embedding traps in position, finishing up to floor level with water proof cement plaster with grating at top complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 75mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (6kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 110mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 75mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 40mm dia (6kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of 12.7 mm NP stop cock Indian make heavy duty Seiko/ Senior/ Nice/ Senior/ Nice or equivalent including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of 12.7 mm dia NP push cock Ist quality Indian make heavy duty Seiko/ Senior/ Nice/ Senior/ Nice or equivalent including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of standard make, Chrome Finish with 7 years warranty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 2000 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.

Wiring with 2 runs of 1.5 Sqmm ISI marked FRSLS/ FRLS-H/ HFFR/ ZHFR PVC insulated flexible opper cables 1100V grade as per IS:694/ 1990 & IS: 17048/ 2018 specifiation for copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi) in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 Module Modular switch of makes Legrand (Mylinc)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ SchneiderLivia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/ Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90 series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) , and 3 plate Ceiling Rose of makes: GMG Home/ Gold Medal Olive/ Million Zoom/ Greatwhite Omega/ Koncept/ Vimalopel/ Anchor/ Vihan/ CPL/ Havells Reo/ Elleys with modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of ISI marked 25 mm outer dia (1.60-1.80) mm thickness mediium grade with IS: 9537 part 3 rigid PVC conduit of makes: Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of ISI marked 25 mm outer dia (1.60- 1.80) mm thickness medium grade with IS: 9537 part 3 rigid PVC coduit of makes: Precision/ Universal & Marudhar/ VIP / Gold Medal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC concealed in roof slabs for wiring with all required accessories including masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of ISI marked 20 mm outer dia (1.40-1.55) mm thickness mediium grade with IS: 9537 part 3 regid PVC conduit of makes : Precision/ Universal & Marudhar/ VIP / Gold Medal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Polycab/ Orbit/ AKG/ Beljin/ Vasavi/ DEC makes) concealed in slab for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. a) 19mm / 20mm x 12 mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. b) 25mm x 12 mm height

Supply and fixing of 12" (300 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark ( Crompton / Almounard / Havells Ventil Air-DB makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 5 of 10.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible Copper cable of makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) in existing pipe for run of mains from Panel board to Main DB as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer-in-charge for the finished item of work at all levels of building

Supply and Run 4 of 6.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of makes :Finolex / RR kabel / Havells/ Fine Cab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ fortune Arrt/ Anchor/ Million/ APAR (Anushaksthi) in the existing pipe for run of Mains from Main DB to LDB,PDB,AC DB as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run of 2 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.

Supply and Run 2 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 1 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run of 1 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building

Supply and Run of 1 of 6.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building

Supply and fixing of 6A/10A 3 pin 2 Module Modular socket with shutter & 6A/10A 1 way 1 Module Modular switch control of makes:: Legrand (Mylinc)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ Schneider Livia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 7 to 9W LED lamp with input voltage 90 to 300V and of Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/ HPL Syska / Green Lites / Fortune Arrt / GoldMedal / Luker/ Leo/ Orbit /Rhino / GLO LED/ Million/ vitoria/ Benlo/ Goldwyn (for new installation) with all labour charges, Material etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 12 Way SPN DB with IP 43 Protection suitable for 10 Nos-10 KA-6-32 A range SP_ MCBs for outgoing and 1No-63A FP MCB for incomer as per IS 8623; IS 13032; IEC 61439-3 and of make Legrand-DX3 / Schneider-A9/ Siemens-5SX4/ Havells STADx /L&T-AU etc., of makes Legrand(Ekinox 3) / Schneider-A9/Seimens/Havells STADx/L&T-Newrange make) including internal connection and labour charges and cost of materials complete as directed by the Engineer-in-charge for the finished item of work at all levels of building for surface/ flush mounting for AC DB

Supply and fixing of (8 +12) 4 Way TPN DB Horizontal with IP 43 Protection suitable for installation of 12 Nos of 32A SP outgoing MCBs and for 1 No 63A 4 pole MCB/Isolator incomer along with provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623; IS 13032; IEC 61439-3 etc., of makes Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/HPL (Techno)/ Anchor (Uno Plus) including internal connection and labour charges and cost of materials etc., complete at all levels of building for surface/ flush mounting as directed by the Engineer-in-charge for the finished item of work.

Supply and fixing of 8 Way VTPN DB with IP 43 Protection suitable for 63A-TP MCB - 8Nos for outgoings and 1No 3 phase 125A, 25KA MCCB as per IS 8623; IS 13032;IEC 61439-3 and suitable for , of makes Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/HPL (Techno)/ Anchor (Uno Plus) including internal connection and labour charges and cost of materials complete as directed by the Engineer-in-charge for the finished item of work at all levels of building for surface/ flush mounting for main DB

Supply and fixing of 48" (1200mm) Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes: Crompton HS Plus / Havells ES PLUS/ Orient Energy Star/ Halonix (Zephyr)/ Polycab (Synergy 50 ISI) / G.M. (Air Wave Premium)/ Bajaj - Edge/ Arcline (Glacier) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering including cost & conveyance of all materials, all labour charges, all leads & lifts etc., complete for finiahed item of work as directed by the Engineer-in-charge.

Supply, transportation and fixing of 36W Recessed / Surface mounting 2' x 2' ' (600x600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, Constant current out put of Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 operating voltage range of 150 to 265 Volts AC, Power factor > 0.9 high power LEDs having efficacy of > 90 lumens/ watt, CCT:3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty of Makes : Surya /C&S / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/ Luker/ Orbit/ Trinic/ ilite/ GLO LED/ Vimal/ Akarui/ Fybros/ Victoria / Benlo / Goldwyn b) LED MAKE : PHILIPS LUMILEDS/ CREE/ NICHIA / OSRAM / SAMSUNG/ EVERLIGHT including cost & conveyance and labour charges etc., complete for finished item of work.

Supply and fixing of 15W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete with earth connection and not less than two years warranty of makes a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/ Jaquar/ HPL/ GM / GreenLites / Gold Medal/ Eveready/ FortuneArrt/ Rhino/ Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of works at all levels of building.

Supply & Installation of 1.50TR, 3 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation, including all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 20A SP Plug and Socket in Sheet Steel enclosure with 32A Single Phase MCB of makes ABB/ Standard / Havells-euro II / C&S / L&T/ GM / Gold Medal/ Anchor/ Salzer/ Polycab for AC points with earth continuity including wire leads, earth connections along with all labour charges for surface mounting etc., complete as per the directions of the Engineer in charge at site for finished item of work.

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC including all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2.5m length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and laying of 8 SWG Copper wire(0.1155Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required including giving connections, all labour charges and cost of all materials etc., complete for the finished item of work at all levels of building as directed by the Engineer in charge .

Supply and fixing of 16" (400mm) Wall mounted Fan sweep A.C. 50Hz.. 1350 r.p.m oscillating type with regulator.of Makes:Makes: Crompton Wind Flo / Bajaj Elite / Havells Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/ Goldmedal(Nora-16) including cost & conveyance of all materials, all labour charges, all leads & lifts etc., complete for finished item of work at all levels of the building as directed by the Engineer-In-Charge

Removing of existing Out door unit of Split Air Conditioners without damaging to copper pipe, gas leakage and refixing the Out door unit of Split Air Conditioners at all levels of building including giving connections, all labour charges, all leads & lifts and cost of all materials if any etc., complete for the finished item of work as directed by the Engineer in charge .

GST applicable on total value of above civil works