Providing repairs and fencing to Dhobhikhana located beside intake well at Gunadala Center in 1st Division in Works Division-II

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seignorage exclduing dewatering charges etc., as per SS - 20 B (APSS 308) (By Manual Means)

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc., complete for all depths and for finished item of work for piles of following diameters. (300mm dia)

Collection and supply of Dust for filling including cost and conveyance charges, spreading, sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

Supply of Chequered Cement Concrete heavy duty tiles conforming to IS:13801using aggregates, cement, pigments of size300x300mm and thickness 25mm of any shades laid over a bed of CM (1:5) 20 mm thick fixed with cement slury and jointing with cement putty mixed with colour pigment including cost and conveyance of all materials and labour charges for fixing watering, curing etc., complete as per SS.

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (For Piles)

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (For Plinth Beam)

Brick Masonry work in CM (1:6) prop with Flyash cement solid blocks / Fal-G Blocks of size 290x150x140mm for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 50kg/sqm for walls for Superstructure walls.

Plastering in CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges for mixing of mortor, watering, curing etc., complete.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (2 Coats - Plastered Internal Walls)

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete.

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate, MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete as directed by the departmental authorities.

Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS:2721-1979: 3"x3" (76 mm x 76 mm) - 8 Gauge (MAT-00888)

Labour charges for fixing of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 3"x3" (75 mm x 75 mm) - 8 Gauge including cost and conveyance of all materials etc., complete as directed by departmental authorities.

Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For New Iron work)

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.

Engaging JCB on hire basis for clearing of jungle like creapers and bushes which are present around and inside the site area etc., complete as directde by departmental authorities.