Providing 300mm Dia RCC Pipe drain and culvert at Latha Super speciality hospital road in Prakasam road in 23rd Division

Cutting of open BT road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for laying of pipes as per the directions of the departmental authorities.

Cutting open CC road surface including water bound macadam including stacking of excavated materials for laying of pipes as per the directions of the departmental authorities.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. By Manual means

Conveyance charges for machinery 2Km lead including loading and unloading etc., complete as per directions of the departmental authorities.

Manufacture, supply and delivery of RCC plain ended pipes confirming to BIS No. 458/2003 at Ex-factory (Rate per meter of effective length) including transportation of all taxes and duties etc., complete. NP-3 Class (for 300mm dia)

Collection and supply of dust for filling including cost and conveyance charges, spreading, sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20mm, 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

VCC vertical walls of plane surface (rate is for both sides centering) including open drains of 600mm size and above

Labour engaged for removing of RCC slabs and other hurdles of masonary works for cleaning with machine including cost and conveyance of all materials and labour charges for cleaning removing etc., complete.

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm,10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, Cement 347 Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Culvert Slabs

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete. For 1.30mtrs x 1.00mtr

Construction of 0.60 x 0.60 M (2' x 2') Inspection Chamber depth varying from 0.60 Mt. to 0.90 Mt. with a slope of 30mm in the channel along with sewer lines as per the approved departmental drawings including earth work excavation and laying of M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing coverslab of 75mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)

Manufacturing, supply, delivery and fixing of MS Gratings made with MS Angulars of size 125mm x 125mm x 8mm for all round frame and U channels of size 125mmx 65mm x 5.30mm for internal supports including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete as directed by the departmental authorities. For 1.50mtr x 1.50mtr