Providing bore well to Sri Seetaramanjaneya Devastanam trust boards in Ayodhya Nagar 32nd Division Works Division-II Area

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

for 160mm dia 10Kgs/cm2 - MAT- 07675

for 250mm dia 10 Kgs/cm2 - MAT- 07677

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 100/125 mm

Supply and delivery of Bentonite powder including cost and conveyance of all materials and labour charges etc. complete as directed by the departmental authorites. MAT-00235

Providing of filter point to 160mm PVC pipe including making charges excluding cost of pipe etc., complete as directed by the departmental authorities (Old Rate)

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. For hard rock formation. for 165mm dia up to 90m depth

Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size BMW-F.35

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size BMW-F.17

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE - 100 Grades MAT-07356 For 25mm dia

Supply and Transportation of 1.50HP 21 Stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10% , Single Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category II. MAT-03647

Supply of 3 Core, 4 sqmm, Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990.Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/Goldmedal/GM (ELEC-1.6.3 C) - MAT-02796

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. etc,. Complete as directed by the departmental authorities. - MAT-03951

Inserting charges for 25mm dia HDPE pipes, Submersible pump sets and specials including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorites. (Old reat)

Supply and fixing of 3'' x 3' long size clamp sets including cost and conveyance of all materials etc., as directed by the departmental authorities

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) 28.60mm ODPipe - SDR 11 BMW-I.228

Construction of bore well platform of 1.85 m dia and 3.00 m length drain and foot rest of 1.00 x LOU m with CC (1:2:4) using20 mm H8G metal including cost and conveyance of all materials labour charges, centering, curing, seigniorage charges &excluding taxes etc., complete as per UNICEF type design.

Providing geologist for find for borewell point (Water) etc., complete as directed by the departmental authorities