Replacement of damaged Electrical UG Cable at NH Road central lighting poles from Near patamata Lanka sub way to Skew Bridge Junction in NH Road Divider and Airport corridor road VVIP Honble CM Convoy Route in Circle III area

Supply and transportation of 16Sqmm x 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of Makes : Torent / Universal / Unicab /Finecab / Polycab / RR Kabel as per the approval of the departmental authorities.

Supply and transportation of 25Sqmm x 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of Makes : Torent / Universal / Unicab /Finecab / Polycab / RR Kabel as per the approval of the departmental authorities.

Supply and transportation of Outer dia. 50mm and Inner dia. 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard) / Precision / CPE as per the approval of the departmental authorities.

Supply and delivery of "ZINDAL" or "TATA" make 40mm GI ‘B’ Class Pipe as per I.S 1239 ISI mark including cost and conveyance to work spot etc., complete as directed by the departmental authorities.

Earth work excavation for cable trench in all soils i.e., hard / loose ground soils and refilling of trench after laying of cable including all labour charges, sundries etc., complete as per directed by the departmental authorities.

Fixing of Poles in Foundation of size 0.45mtrs x 0.40mtrs dia X 0.9mtrs with M20 C.C Mix vibrated concrete mix including suitable templates, nuts and bolts, PVC Pipes inside and boxs for run of cable including earth work to the required depth, sand dedding at bottom etc., complete as directed by the departmental authorities.

Laying of U.G cable up to 50 Sqmm in trench / open area including inserting of cable in the HDPE DUCT including all labour charges & sundries etc., complete as per directed by the departmental authorities.

Engaging of Air compressor 7Cmm (Diesel) on hire basis including hire charges, fuel charges, crew charges etc., complete as directed by the departmental authorities.

Supply of 3 core 1.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 .Makes: Finolex / RR kabel / Polycab / Goldmedal as per directed by the departmental authorities.

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm Makes:Dowels/ Jainson / Cometas per directed by the departmental authorities.

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 25sqmm Makes:Dowels/ Jainson/ Cometas per directed by the departmental authorities.

Supply of 6-32A SP MCB10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) as directed by the departamental authorities.

Supply and fixing of 300mm x 260mm x 140mm 16SWG CRCA Sheet Box (Junction Box) with hinged door and locking arrangements and din channel including 4 Pole Connectors of approved variety fixing MCBs duly painting,fixing with necessery arrangments etc.,complete as per site conditions and as per the directions of departmental authorities.

Removal of existing centre divider pole old Junction Boxes and G.I Pipes from Near patamata Lanka sub way to Skew Bridge Junction including all labour charges and tansporation to Departmental stores handover the old Junction Boxes and G.I Pipes etc., complete as per the directions of departmental authorities

Removal of existing centre divider pole old Cable from Near patamata Lanka sub way to Skew Bridge Junction including all labour charges and tansporation to Departmental stores handover the cable etc., complete as per the directions of departmental authorities

Providing Plain Cement Concrete of M20 Grade Design Mix using 343Kgs. of Cement, 20mm,10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cost and conveyance of all materials and all labour charges for machine mixing, laying, tamping of concrete & curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Supply and transportation of 210 LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass / temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec- 3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty make a) Luminaire Make : Halonix (Modular/ Lumos-Super) as directed by the departmental authorities.

Fixing of LED Luminaires with 3 core cable and MCB's etc. excluding cost of materials including all labour charges, sundries etc., complete as directed by the departmental authorities.