Executive Engineer Circle-I works Division

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

Under-reaming for Bored cast-in-situ R.C.C. single under reamed piles (SUR) for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including centering charges,seigniorage charges and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.(BLD-CSTN-2-13)

C)plinth beam at Centre

D) columns GF level

D) columns FF Level

Supplying, fitting and placing HYSD bar (Fe 415 )reinforcement of any approved make as per drawings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete as per ss (RBR-FNDN-7) .,

Dismantling of existing structures like culverts, bridges retaining wall and other structure comprising of masonary, cement concrete, wood work, steel work, including T & P and scaffolding whereever necessary, sorting the dismantled material disposal of unservicable material and stacking the serviceble material with all leads and lifts. (R.C.C)

Earth work excavation of strucures as per drawing and technical specifications Clauses 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Supply and Delivery of Quarry Dust from approved quarry including cost and conveyance of all materials labour charges, spreading, sectioning, ramming, watering etc complete as per SS.

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Removing and refixing of Existing Gate Including all labour charges, cost of supporting Bamboos etc complete as directed by the dept. Uthorities

Painting with Synthetic Enamel Paints -Two coats -for Old Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Providing Ornmental Arch for Burrial ground Entrance . including cost and conveyance of all materials, labour charges for Fixing of Ornamebntal arch with Designs like Sculpures, Name board, ornamental Paintings to elevate embossing structure, sculpture Letters and other symbals related to Burrial Ground etc complete as Directed by the Dept. Authorities.

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

With out Form Work

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Engaged labour for shifting the material and other necessary items complete.as directed by the departmental authorities.

Emgaging JCB for removing debris and other un necessary items,complete.as directed by the departmental authorities.

Emgaging Tractor for liftingn and transport the debris and other un necessary items,complete.as directed by the departmental authorities