Construction of RCC Culverts at P & T New Colony Road No.1 Plot No.9 & 10 in 10th Division. 6th Call General Funds

Dismantling of RCC including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities with all leads and lifts etc. complete as per SS.

Dismantling of cement concrete including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities with all leads and lifts etc. complete as per SS.

Dismantling of Brick work including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities with all leads and lifts etc. complete as per SS.

Earth work in excavated for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and brcking, removal of stumps and other deleterious material and disposal upto a lead of 50mts dressing of sides and bottem and backfilling intrenchs with excavated suitable material as per technical specification 305 MORD/304 MORTH

Conveyance excavated earth and dismantled materials to a lead 2 km including cost and conveyance of all materials and labour charges ctc complete.

Supply and Delivery of Quarry Dust from approve quarry including cost and convayence of all materials and labour chargs staking at site to dept.guage including sectioning sperading watering etc complete

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing concrete for plain concrete (M15 Design Mix) using 275 Kgs Cement ,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing Plastering CM (1:4) 12mm thick including cost and conveyance of all materials, seignorage and labour charges for mixing mortor, watering, curing etc., complete as per SS.

VRCC M-20 mix using 20mm ansize graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (with centring charges)

VCC vertical walls of plane surface (rate is for both sides centering) including open drains etc.,complete as per SS.

Supplying , fitting and placing Fe- 415 bar reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work

Providing laying spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadam specification including cost seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to acheive the desired density etc. as directed by the Engineer-in-Charge and as per MORT & H specification 406(4th rivision) for finished item of work

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum. including cost and conveyance of all materials and labour charges Excluding CP & TP on Seignorage charges etc,Complete.

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete.as directed by the departmental authorities.

Supply of 25mm thick high performance expansion joint filler board (SILFLEXCAPCELLHD-100 or equivalent make),placing the same 25mm below top of pavement slab sealing with bituminous hot sealing compound (Grade-A-ISI) polysulphudiet 50mm interval in CC.Pavement incl.cost and conveyance of all materials but excl.labour charges for placing in position,for expansion joints confirmig to MORTH Specification 602-1Rmt of joint length