Providing 600mm Dia DI UGD Trunk Line from D Mart to Patamata Lanka DP Station in 9th division (Reach.II) (VMC General Funds) Rc.E4-100026/2026

Cutting and open of B.T.Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for laying of pipe lines as per the ditections of the departmental authorities.600mm dia DI Pipeline

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH . Manual 600mm dia DI Pipeline

Up to 3 Mts -Manual

Up to 3 Mts -Mechanical

Up to 6 Mts -Manual

Up to 6 Mts -Mechanical

Centrifugally cast (SPUN) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding taxes and duties. 600mm dia DI Pipe-K9

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) 600mm dia DI Pipe

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 600mm dia DI Pipe

Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding central excise duty, sales tax, octroi and other Govt. Levies etc., complete as per directed by the Engineer-in-charge.Suitable for following dia DI Pipes. SSR P.No.74 600mm dia DI Pipe

Supply and delivery of Quarry Dust filling from approved source including cost, seignorge charges and conveyance of all materials including all labour charges for filling, sectioning, watering and ramming etc., complete as per S.S 600mm dia DI Pipe

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc. complete.600mm dia DI Pipe

Labour charges for Cutting C.I./D.I pipes without water in mains dia of pipes in mm.complete as per ss. SSR P.no 6 Fitter C1-1 600mm dia

Construction of circular manholes with a slope of 30mm to 50mm in the channel along with sewer lines as per the approved departmental drawings including cutting of C.C/B.T/WBM, earth work excavation and laying of C.C.(1:4:8) bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing top coping 150mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/ Cum including supply and fixing of 35 H.D Manhole cover as per BIS:12592 (Part 1&2) with frame and encapsulated plastic steps including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C coping as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)

4.50m deep (4.36 to 4.65M)

4.80m deep (4.66 to 4.95M)

5.10m deep (4.96 to 5.25M)

5.40m deep (5.26 to 5.55M)

Labour engaged for removing of existing RCC pipes and manholes silt cleaning complete as directed by the departmental authorites.

Bailing of water from the pipeline trenches with 5HP Electrical engine driver pump sets, including hire charges, fuel charges and wages for driver and helper etc., complete as per SS as directed by the departmental authorities.

Shovel 0.85 cum 110 hp / Hydraulic Excavator for attending major excavation of earth for pumping mains and distribution water supply pipe lines etc as directed by the officer in-charge.

Engaging JCB / Proclainer for attending major excavation of earth for pumping mains and distribution water supply pipe lines etc as directed by the officer in-charge.

Engaging Tractor for attending for transpotation of labour, machinary and materials such old pipes as directed by the officer in-charge.

Hire charges of Hydraulic Truck Crane 16T capacity crane including hire charges, fuel charges and wages for driver and helper etc., complete as per SS. For transportation of pipes from one location to the work site

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.