Supply and Fixing of 10HP Dewatering pump sets with all accessories for Ensuring rainy season 2026 at Gandhi Colony and Yarrapothu vari street in Circle III area

Supply and delivery of Three-phase 10Hp monoblock motor pumpset having input voltage of 440V, 50hz has a maximum flow of 44 lps and head of 11 Mtrs and 150mm dia suction and 150mm dia delivery of Make: Texmo /Kirloshkar (Aqua/Taro) with cast iron impeller and gland packing As per directed by the departmental authorities.

Fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using Finolex copper FRLS cables including 10HP capacity DOL Starters- 6No's, 40A 3P MCB's-6No's, 50A 3Pole Connctors-6No's, Single Phasing Preventer -6No's, 160A MCCB for incomming and including aluminium bus bar and RYB Indication lamps . Makes:Make C&S/Crompton / L&T / Siemens/BCH. As per directed by the departmental authorities

Supply and delivery of 150mm dai CI hose coller As per directed by the departmental authorities

Supply and delivery of 150mm dai (6") PVC foot valve screw type with approved make As per directed by the departmental authorities

Supply and delivery of 150mm dia (6") canoflex pipe As per directed by the departmental authorities

Supply and delivery of 150mm dia (6") Hose clamps As per directed by the departmental authorities

Supply and delivery of 150mm dia (6") dai GI B class long bend with provision of 25mm Nipple and bend for section side filling as per directed by the departmental authorities

Supply and delivery of 150mm dia (6") dai screw type GI/ MS flanges As per directed by the departmental authorities

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size As per directed by the departmental authorities.

SUPPLY AND DELIVERY OF BOLTS AND NUTS of various sizes WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES As per directed by the departmental authorities.

SUPPLY AND DELIVERY OF 3mm/6mm RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES As per directed by the departmental authorities.

Supply of 3 Core 6.0 Sq mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes:Finolex/ RRKabel/ Polycab /Havells/ KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi) as Per directed by departmental authorities.

Supply and Delivey of 150mm dia rubber washers etc., complete As per directed by the departmental authorities

Supply delivery and Fixing of 10 HP Motor Dome for covering of Motor Body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities.

Supply of 35 Sq mm 3 core ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Fine cab/polycab and approved make.

Supply and Transportation of 1.0HP (25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/ ARYEN VARSHA /Falcon.

Supply and Delivery of suitable size mesh to Foot Valve to avoid the floating matter etc complete as direceted by the departmantal authorities.

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., of size 35Sq mm approved.

Supply and delivery of 12mm Nylon Ropes etc complete as direceted by the departmantal authorities.

Erection charges for 10HP pump sets (Depatmental Supplied pump sets) with suction and delivery pipes , foot valve, panel boards etc complete as direceted by the departmantal authorities.