Dr.NTTPS-STAGE-V

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, dewatering charges etc. including cost of disposal of excavated soil at a distance up to 1 KM and complete for finished item of work as directed by the Engineer in charge.

Auguring and boring of 350 mm dia holes in site for Bored cast in situ R.C.C. Piles for building foundations in ash in slushy condition, clayey soils like Black cotton soils and ordinary soils as per approved designs. the rate includes hire charges of drilling bore hole machinery, hire charges bentonite pump and cost of bentonite (if required) ,all operations, labour charges, etc., complete for all depths and for finished item of work .

Providing casing for Bored cast in situ R.C.C. Piles using 6mm thick 400 mm inner dia MS pipe (excluding basic cost of pipe ) for building foundations in ash in slushy condition, clayey soils like Black cotton soils and ordinary soils as per approved designs. the rate includes all operations, labour charges, hire charges of welding & pushing equipment of pipe, shell equipment, conveyance charges of M.S pipes up to 2KM ,loading & unloading of pipes etc., complete for all depths and for finished item of work . ( The 400mm dia M.S pipes will be provided by department at free of cost at central stores of Dr.NTTPS)

Providing PCC (1:4:8) using 40 mm size crushed HBG metal. The rate includes cost and conveyance of all materials, cement, all labour charges, all leads and lifts, machine mixing, curing, seigniorage charges etc., complete for finished item of work as directed by the Engineer-in-charge.

Cutting, bending, placing in position, binding of Reinforcement steel (HYSD/TMT) (FE-500/FE-500D/FE-550)for all RCC works at all heights. The rate includes cost & conveyance of structural steel & binding wire, all leads and lifts etc., for all floors up to 20m height complete for finished item of work as directed by the Engineer-in-charge.

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. A) PILE FOUNDATIONS

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. B) PILE CAPS

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. C) RCC wall

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. D) COLUMNS

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. E) BEAMS

RCC M- 25 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 50% of 20mm size graded machine crushed hard granite metal (coarse aggregate) & 50% of 12mm size HBG metal from approved quarry. The rate including cost and conveyance of all materials cement, fine aggregate (sand), coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges, steel scaffolding and steel plate centering charges, vibrating charges, all labour charges for machine mixing, laying concrete, curing etc., complete for finished item of work as directed by the Engineering in charge. F) SLAB

Construction of brick masonry with CM (1:6) using fly ash bricks. The rate including cost & conveyance of cement, flyash bricks, steel scaffolding charges, labour charges, for curing with all leads and lifts, seigniorage charges etc., for all floors up to 20m height complete for finished item of work and as directed by the Engineer-in-charge.

Plastering with cement mortar (1:5)12 mm thick for inner face of brick masonry walls. The rate including cost and conveyance of all materials cement, other materials, all labour, scaffolding charges, all leads & lifts, curing, all incidental charges, etc., for all floors up to 20m height complete for finished item of work as directed by the Engineer in charge.

Plastering with cement mortar (1:4) 20mm thick for outside face of brick masonry walls. The rate including cost and conveyance of all materials ,cement, other materials, all labour, scaffolding charges, all leads & lifts, curing, all incidental charges, etc., for all floors up to 20m height complete for finished item of work as directed by the Engineer in charge.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of cement, all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, for all floors up to 20m height complete for finished item of work.

Painting one coat of Water Based Cement Primer on New Plastered Surface and 2 coats of exterior emulsion paint of approved brand ( Asian / Berger / Nerolac) for external walls, with approved colour and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site, cost of brushes, scaffolding, curing, cleaning, and all operational, incidental, all labour charges, leads and lifts, taxes etc.for all floors up to 20m height complete for finished item of work as per SS 911 and as directed by the Engineer in charge.

Supplying fixing of Premium Galaxy Granite of approved colour of 18-20mm thick on either side entrance of Lift over a bed of CM with neat joints with cement paste with epoxy adhesive agent like araldite for cladding.The rate including cost and conveyance of cement,sand,granite, labour charges for rounding the edges and V grooves where ever required at all elevations, cost of araldite etc., for all floors up to 20m height complete for finished item of work in all floor as directed by the Engineer-in-charge . a) Wall Cladding in CM (1:3) 12mm thickness

Supplying fixing of Premium Galaxy Granite of approved colour of 18-20mm thick on either side entrance of Lift over a bed of CM with neat joints with cement paste with epoxy adhesive agent like araldite for cladding.The rate including cost and conveyance of cement,sand,granite, labour charges for rounding the edges and V grooves where ever required at all elevations, cost of araldite etc., for all floors up to 20m height complete for finished item of work in all floor as directed by the Engineer-in-charge . b) Flooring in CM (1:8) 20mm thickness

Supply ,Fabrication and Fixing of Structural steel beams as per the requirement. The rate includes cost & conveyance charges of structural steel ,fabrication charges, all labour charges, all leads and lifts, hire charges of welding machine, cutting set, grinding machine for all floors up to 20m height etc., complete for finished item of work and as directed by the Engineer-in-charge.

Dismantling of brick masonry and disposing up to 1 KM lead. The rate including all labour charges for demolition ,stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead, all lead & lifts at all elevations etc., for all floors up to 20m height complete for finished item of the work as directed by the Engineer in charge.

Dismantling of reinforced concrete and disposing up to 1 KM lead. The rate including all labour charges for demolition ,stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead, all lead & lifts at all elevations etc., for all floors up to 20m height complete for finished item of the work as directed by the Engineer in charge.

Cutting /Dismantling of M.S grills/M.S pipes. The rate includes all tools & tackles required for cutting, all labour charges, all leads and lifts, hire charges of welding machine, cutting set, grinding machine etc., for all floors up to 20m height complete for finished item of work and as directed by the Engineer-in-charge.

Re erection of MS grills in masonry walls. The rate includes all tools & tackles required for minor fabrication and erection , all labour charges, all leads and lifts, hire charges of welding machine, cutting set, grinding machine etc., for all floors up to 20m height complete for finished item of work and as directed by the Engineer-in-charge.

Labour charges for back filling with fly ash/earth complying with the standard specifications for filling, watering, ramming, labour charges with all leads & lifts including conveyance of fly ash for 2KM etc., complete for finished item of work as directed by the Engineer-In-charge.