Loading…
Loading…
Tender Value
₹14.4 L
EMD Value
₹14,500
Closing Date
5 Aug 2026, 5:30 pmClosed
VIJAYAWADA MUNICIPAL CORPORATION
VIJAYAWADA
Providing Precast Paver Block flooring and toilets for GVR nagar ELSR Compound in 30th Division in Works Division-II
970329
Rc.E11-113141/2026
OPEN - NCB
Civil Engineering Works
NTR, ANDHRA PRADESH
6 documents required · 6 mandatory
₹512
₹14,500
1 Aug 2026
1 Aug 2026
1 Aug 2026
Granular sub-base/base/surface course with quarry rubbish (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.
Construction of granular sub-base by providing HBG meterial confirming to Grading-V of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH(5th Revision) as directed by the Engineer-in-Charge
Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.
Providing stone Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Plastering with Cm (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss.
Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm
Supply and run of 1 of 14 /0.3mm (1/18) (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Make:Finolex as directed by the departamental authorities.
Supply and run of 2 of 56/0.3mm (7/20) (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.
Supply and Fixing of 18W/20W 1200 MM length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K , minimum CRI >70, etc complete of make PHILLIPS ,LUMILEDS/OSRAM/SAMSUNG
Supply and fixing of 6A 3 pin wall plug Modular socket with 6A Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Makes: Legrand Arteor /GM-(Four-Five)/ Goldmedal(GIFA) as directed by the departamental authorities.
Supply of 6A / 10A 1 Way 1 Module Modular Switch Makes: Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/ GMZicono/ C&S/Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/Qura)/ Ploycab(Levana)/ Anchor-Roma/ IndoAsian/Pointer/ CPL/Kolors/ Vihan/Hosper
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm BMW-D.34
Supply, Delivery and fixing 12.7 mm dia NP push cock Ist quality.BMW E-29
Supply, Delivery and fixing of Angle Valves including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities (Rc.E11-102286/2021)
Supply, Delivery and fixing of Weist Pipe including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities (Rc.E11-102288/2021)
Supply and Fixing of Premium make CPVC Pipes of ODPipe - SDR 13.5 and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) (BMW-I.221) 15.90mmODPipe -SDR 13.5 (BMW-I.220)
Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092 (BMW-I.403 )
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. (6.0 Kgs/cm2) For 110mm (MAT-07635)
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. (6.0 Kgs/cm2) For 75mm (MAT-07633)
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'S'trap (BMW-D.14)
Supply and fixing of WPC door make with alround WPC frame and inserting 22mm WPC shutter to planks including fixing for necessary size and cost of first quality hinges, tower bolts and necessary fittings ec., completed as directed by departmental authorities(Quotation) (0.75m & 2.00 Size)
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)
Supply . Delivery, laying and jointing of high strength precast concrete blocks interlocking reflecting designer (Rubber Mould) 80mm for paving of M-40 grade and top 10mm thickness shall be for imported colour pigmentation with approved colours and white cement to get reflecting as per drawings and technical specifications as directed by departmental authorities
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ-113141-2026.xlsx
TENDER_DOCUMENT • 0.02 MB
113141-2026-NIT.doc
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .