Providing Drain Wall Repairs and other Miscellaneous works at various Locations in AE-8 Section in view of Swachh Survekshan-2025-26. 1st Call General Funds

Dismantling of cement concrete including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities with all leads and lifts etc. complete as per SS.

Dismantling of RCC Structures including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities etc. complete as per SS.

Dismantling of Brick masonary & rough stone walls in cement mortar including labour charges, T&P and scaffolding wherever necessary, sorting the dismantled material disposal of unserviceble material and stacking the serviceble material as directed by the departmental authorities etc. complete as per SS.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing Brick work CM (1:6) using 2nd class bricks traditional size 23 x 11 x 7 Cms from approved kiln including cost, seigniorage and conveyance of all materials and labour charges including mortar mixing, laying, watering etc complete as per SS.

Providing Plastering with CM (1:4) 12mm thick on brick work in structure as per technical specifications 1300/2200 MORTH including cost and conveyance of all materials, seignorage and labour charges for mixing mortor, watering, curing etc., complete as per SS.

Centering charges for VCC & RCC including cost and conveyane of all materials and labour chages fixing in position etc as dept authorities

Carting away the surplus earth, cement concrete, brick and stone debris from the wor site with a lead of 2KM beyond initial lead incl. Loading, unloading and conveyance etc., complete as directed by dept. authorities as per APSS 38.2

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate, MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc.,, complete as directed by the departmental authorities

Labour Engaging for clearing Old Wall surfaces including cost and conveyance of all labour charges etc., complete as directed by the departmental authority.

Providing mural Arts decorative theme on the walls for giving visual feel to the visitors, tourists etc., includes overall cleaning of surface of walls painting one primary coat and two coats of acrylic emulsions medium of APEX ultima, weather proof exterior paintings and as per direction of concerned officials of VMC and as per approved design etc., cost including all materials, tools artists/painters charges, labour charges, scaffolding etc and conveyance of all materials to site complete as directe by the departmental authorities.

Painting, Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Synthetic Enamiel paint - Two Coats - to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveynce of all materials and labour charges etc complete for finished item of work asper SS

Painting with plastic emulsion paint approved Grade-1 brand and shade over coat apply for new excavated walls including cost and convayence of all materials and labour charges etc., complete as directed by the departmental authorities. (External walls)

Supplying of hot applied Thermoplastic road marking compound, 2.5 mm thick including reflectorising glass beads @ 250 gms with Relectorising Glass Beads on Bituminous surface at 250 gms per square area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35, the material should be of BERGER Company/BERGER equivalent and must comply with the following. a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in department lab In case the department approves the white index of any vendor, the department engineer may carry out random checking of the applied products at site against the approved panel In case of any major deviation, beyond acceptance limit, the department reserve the right to cancel of reject the total supplied consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade. D)Adhesion strong. E)Softening point: 102 degree centigrade. F) Dried film finish, smooth and uniform G)Night Vision: High as directed by the Engineer-in-charge and conforming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997 Type-XI

Supplying and fixing of Solar molded raised pavement markers made of plastic body moulded from HIPS (HI-impact polysterene) or ABS or ASA (Acrylic strene Acrylonitrite) and reflective panels with micro prismatic lens capable of providing total internal refiction of the light entering the lens faceand shall support a load of 16000 kg tested in accordance to ASTM D4280 type H and complying to specifications of category A of MORTH circular no RW/NH/33023/10-97-Do III Dt.11.06.1997. The height, width and length shall not exceed 50mm, 100mm and 100mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35+/- 5 degree. The strength of detachement of the integrated cylindrical shanks, (of diameter not less than 19+/-2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 kgs. Fixing will be drilling holes on the road for the twin shanks to go inside without nalls and using epoxy resin based adhesive as per manufactur's recommendation and complete as directed by the Engineer in charge. Type-XI

Manufacture, Supply and Erection of Stainless Steel Signage Boards of size 600 x 600 mm using SS316 grade horizontal and vertical pipes and support sections for sign posts shall confirm to IS Specifications SS316 grade with Matt (or) Satin finish, polishing should be diagonally matching at each corners. No hole at welding placing, Welding mark should not be visible it should be proper grinder and polished Plates and Support Sections for sign posts shall confirm SS316 and IS specifications. Aluminium Composite Panel (ACP) sheets of 4mm should have 0.5mm of Aluminium skin on both side of polyethylene core of Alucobond/Deltyn or equivalent make for sign boards shall be smooth hard to IS 736-Material Designation 24345 or 1900 ACP sheet for pasting art work with VHB tape 4991 Retro Reflective vinyl conforming to type XI make 3M or equivalent standards of 12 ASTMD 4956-09 & as per IRC 67-2012 for full background of blue colours, border & letters white Bolts, Nuts and Washers, High Strength Bolts shall confirm to I S 1367 whereas precision bolts, nuts etc. shall confirm to IS 1364. Concrete shall be of M25 grade IS 2811-1964 recommendations for manual tig/arc welding of Stainless steel Size of board. 600 x 600 mm SS 316 pipe 75x50x2mm of length 2100 from ground level and diagonal bended of 45 degree of length 650mm to that one corner 50X25X1.5 mm SS 3165 is attached and digonal bended of 45 degrees of length 600mm is extension where whole frame of 600mm x 600mm board size is made up with SS 316 25mm x 12mm x 1.5mm where the 4mm ACP is attached. On that Street Signage stickering can be done both sides SS 316 base plate of 10mm thicknes and 18mm dia. holes for bolts ground foundation as directed by the department authorities.