Construction of Bilheri Chakarpur (SVS) water supply scheme including supply installation and Testing of Rising main, Distribution System, FHTC work, construction of OHT and all appurtenance work etc complete under JJM

Rates for Construction of Bilheri Chakarpur (SVS) water supply scheme including supply installation & Testing of Rising main, Distribution System, FHTC work, construction of OHT & all appurtenance work etc complete under JJM.

Supply Main & Distribution work

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge :bituminous road

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in -charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Excavation in ordinary soil (loam, clay, sand) for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches or into the sides between foundation trenches or into the plinth and removal.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc, disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of engineer in charge (1240*0.60 m)

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per the direction of engineer in charge (Old CC paver blocks shall be supplied by the department free of cost)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc all complete as per direction of engineer in charge

Providing, Lowering into trenches with true to alignment. Laying & Jointing of full Length of HDPE Pipes of specified grade as per IS:4984-1995 and specifications with testing of pipe line including supply of jointing materials.(PE-100 Grade, PN-8(8.0 Kg/Cm2) Normal Pressure (PN) in 8.0 Kg/Cm2 63mm PN8

Providing of all materials, Carting from site store to site of work, Laying & jointing of G.I pipes conforming to IS:1239 (Part-1) including supply of all jointing materials like specials, white lead, hemp and oil etc in trenches with its cutting, threading and testing of pipe line etc. 15 mm dia(Medium)

100 mm dia(Medium)

150 mm dia(Medium)

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yet 210, Jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply pipe lines (Adore, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc. complete. 100 mm dia (4.8 mm thick)

200 mm dia (4.8 mm thick)

80 mm dia

100 mm dia

125 mm dia

200 mm dia

Fire hydrant valve conforming to IS: 5290 in position including all material, labour, T&P etc complete.

Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4"graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5for sluice valves 50mm & 65mm

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 for Air valves 50mm

Providing and making House service connection from water supply distribution pipe line etc. complete

Construction of RCC OHT work

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of following capacities ( in kiloliters ) and 12 m. staging with 1.00 m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x 1m R.C.C. landing at suitable locations and railed with 3 rows of 20 mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT / M2 and staging 12.00 metre. For 200 KL

Additional rates for staging per meter height beyond 12 m height including cost of all material, labour,shuttering, scaffolding T&P complete for following capacity ( in kiloliters ) Over Head Tanks. 6 mtr staging

Pump house cum Boundary wall work

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position cement concrete of specified grade (1:4:8) with cement, coarse sand and graded stone aggregate of 40 mm nominal size in foundation bed excluding the cost of centering and shuttering - All work up to plinth level :

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work using Mild steel and Medium Tensile steel bars including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (1.00% of R.C.C work)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12 mm thick cement plaster over brick work of pump house and chlorine room in the proportion of 1:4 of cement and fine sand

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, 30 mm thick sheesham wood shutters

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws/nut bolts etc. complete. Door size 125x65x2.12 mm

window size 100x58x1.90 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with necessary screws/nut bolts etc. complete. 2500x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt with necessary screws/nut bolts etc. Door size 150 x 10 mm

Window size 100 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles size 125 mm conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles size 100 mm conforming to IS:4992 with necessary screws etc. complete :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire

providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc internal work- exposed on wall

Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc (external work) (i) 15 mm dia nominal bore

(ii) 20 mm dia nominal bore

(iii) 25 mm dia nominal bore

Providing and fixing PTMT bib cock of approved quality 15mm nominal bore

Providing and fixing C.P brass stop cock of approved quality

Providing and fixing gun metal gate valve with C.I wheel of approved quality :20mm nominal bore

Providing and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic ball 25mm nominal bore,152mm long, weighing not less than 440 gms

Providing and fixing water closet squatting pan with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device conforming to I.S 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous china orissa pattern W.C pan of size 580*440 mm with integral type foot rests.

providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470*420 mm bowl depth 178mm

Supply and fixing polyvinyl chloride pipe 90mm dia including fitting all for complete

Supply and fixing polyvinyl chloride pipe 110mm dia including fitting all for complete

Providing and placing on terrace polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet,and overflow pipes but without fitting and the base support for tank

Wiring for light point/fan point/exhaust fan piont/ call bell piont with 1-f sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the piont with 1.5 sq.mm FRLS PVC insulated copper conductor single core cabble etc as required. (Group B Long Discription)

Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

WGPVCSB Circuit/sub main wiring in PVC conduit: wiring for circuit/ submain wiring alongwith earthwire with the following sizes of PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required 2*2.5 sq mm +1*2.5 sq mm earth wire 2*1.5 sq mm +1*1.5 sq mm earth wire

2*2.5 sq mm +1*2.5 sq mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, dinbar, interconnections, powder painted including earthing etc as required 6 way, double door

Supplying and fixing 5A TO 32A rating, 240/415 V, 10 kA "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required.Single pole

Supply & fixing of ceiling fan 1200 mm

Supply & fixing of exhaust fan

Supply & fixing of florocent tube lights 1200mm

Supply & fixing of LED bulb 9 watt

Supply & fixing of LED street light 50 watt

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required

Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer at 50mm)

Electrical & Mechanical works

Transportation of heavy duty drilling machine with all T&P and plant up to the site i.e.

Erection & levelling of rig machine at site of work

Drilling of bore upto 150 mtr. depth below ground level in a all type of solt/underground condition with DC/RC rig machine or suitable method suitable to discharge as desired with disired bore dia as per instruction of engineer-in-charge.

Procurement of TW assembly as below 300 mm dia MSERW plain pipe 7.90mm thick Blind & thread

300 mm dia MSERW slotted pipe 7.90mm thick

300 mm dia bail plug

300 mm dia MS well cap

300 mm dia MS clamp with nuts & bolts

Supply of pea gravel of size 1.6mm to 4.8mm

Surrounding of pea gravel in between bore and tube well assembly upto entire depth of tube well ordered by the department.

Prepairing & lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as required at site complete with all T&P required Fixing of 300mm dia bail plug with nut & Bolt.

Lowering of 300mm dia MSERW housing pipe (plain & slotted pipe) as required.

Fixing of 300mm dia, 8mm thick tube well cap

Fixing of 300mm dia MSDI housing clamp

Dismantling of rig machine & clearance of site after satisfactory completion of work.

Development of tubewell by air compressor 1400/1100 CFM 350/250PSI

Development of tubewell by the suitable submersible O.P. unit to get the sand free discharge.

Pumping Plant works

Pumping Plant accessories for tube wells including pump earthing material, piping & valves, gauges, required tools for maintenance, chain pully block, 2 ton capacity, rubber resistance shee, testing of plant at site and painting entire insulation etc. Supply of submersible pump and motor set of 500 LPM discharge at 75 m head

Supply of submersible copper cable size 1x3x16 sq. mm

Supply and fixing of Rubber packing including all labour and T&P complete in all respect. (80 mm dia size)

Supply and fixing of Nut-Bolts different sizes including all labour and T&P complete in all respect/

Supply and fixing of main piping and valves of 100mm size having following items. Supply and fixing of 100 mm dia x 5.6mm thick flanged column pipe in 3m length with inter locking arrangement

Supply and fixing of 100 x 100 x 100mm dia CI flanged tee.

Supply and fixing of 100 mm dia CI D/F bend

Supply and fixing of 100 mm dia MS D/F bend pipe of 1.5m length.

Supply of MS clamp 100mm dia

Supply of MS flange 100mm dia

Supply of Pressure gauge with Fitting

Supply of chain pully block having capacity 3 Tonne capacity 4 mtr lift spire gear tested on 4.5Ton load.

Supply of chemical earthing material for pumping plant including earth electrode, aluminium earth strip etc as per I.E. rules.

Supply & fixing of H.R.C. main switch 3pole with neutral link in 100 amp. 440 voltage A.C.

Supply of Rubber Insulation sheet 1 Mtr.x2Mtrx0.025Mtr.

Liquid Chlorine required for six monts maintenance

Supply of chlorine texting kit

Supply of special tools and spanners with 2 Nos. chain wrench

1 Month Trail running and 5 months maintenance including watch ward

Installation, commissinoning & testing of pumping plant and all accessories

Supply and fixing of electric type of dosing system complete with solenoid coil actuated pulsar circuit,

Supply, installation, testing and commissioning(SITC) on turnkey basis for Fully Automatic Pump automation control panels of different capacities having "FIELD PRROGRAMMABLE LOGIC CONTROLLERS based SCADA operated pump motor start, Run, control, Protect against faults automatically operated control & management system: for supervisory control and data acquisition system at pumping water supply schemes & two years free of cost A.M.C. for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing including cartage from works of manufacturer upto site of work:-40HP.

Supply, installation, testing and commissioning of three phase Electronic Automatic Voltage Stabiliser suitable for unbalanced voltage and unbalance load including fixing of proper size copper lugs on input and output cables on both ends at different sites on turnkey basis including five year cost free maintenance. Input voltage 280V/460V/240V(Three phase) Servo Voltage stabilizers (25 KVA)

Supply & fixing of M.S Tripod 100mm dia including all labour complete

Sign and display board

M/s Rama Industries