Upgradation of Road to Cement Concrete (CC) Road to LIG-2 Park East side Road -1 at UDA Colony in 63rd Division

PICKING OLD METALLED SURFACE TO DEPTH OF 40 TO 100 mm SPREADING OLD METAL AND NEW METAL SECTIONING INCLUDING EDGEBUNDS AND SUBGRADE ROLLING, SPREADING METAL INCLUDING BLINDAGE OFGRAVEL WATERING WITH AN INITIAL LEAD OF 2 HECTOMETERS AND HAND ROLLER ( 1.5 TO 2 TONNES) ROLLING ETC., INCLUDING BARRICADING, DIVERSION OF TRAFFIC AND WETTING THE NEW CONSOLIDATION FOR A FORTNIGHT COMPLETE (MAT-00523)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonary, cement concrete, wood work, steel work including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specficiation Clause 202 MORD / MORTH. For Cement Concrete

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. By machinary

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. By machinary

Conveyance of excavated earth for a lead of 2Km including loading, unloading, spreading, sectioning etc., complete and as directed by the departmental authorities.

Providing quarry rubbish spreading in layers not more than 150mm thick, sectioning to required camber and gradient, watering including cost and conveyance of all materials, water etc., to site and other T&P etc., complete duly maintaining the required camber and gradient in the formation as directed by Engineer-in-Charge.

Construction of granular sub-base by providing HBG meterial confirming to Grading-V of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH (5th Revision) as directed by the Engineer-in-Charge

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work. For road

Separation membrane of impermeable plastic sheeting 125 micron thick

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum. including cost and conveyance of all materials and labour charges etc, Complete.

Supply of 25mm thick high performance expansion joint filler board (SILFLEXCAPCELLHD-100 or equivalent make), placing the same 25mm below top of pavement slab sealing with bituminous hot sealing compound (Grade-A-ISI) polysulphudiet 50mm interval in CC. Pavement including cost and conveyance of all materials but excluding labour charges for placing in position, for expansion joints confirmig to MORTH Specification 602-1Rmt of joint length. For 175mm thick CC roads

Supply of bituminous hot sealing compound (grade-A ISI ) poly sulphide and sealing the joints incuding cost and conveyance of all materials etc., but excluding labour charges for placing in position for contraction joints at 1.50 interval / for expansion joints/ for longitudinal joints as per MORTH specification number 602-1 Rm

Manufacture as per BIS: 12592 (Part 1 & 2) supply & delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R destination including loading, unloading & stacking at site but excluding all taxes. (MAT-08225)

Supply, delivery, lowering and laying of SWG pipes in readymade trench true to alignment and gradient, jointing and testing of stoneware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn including cost and conveyance of all materials etc., complete. For 100mm dia

Manufacture, supply & delivery of HDPE pipes conforming to IS 4984-2016 including transportation to anywhere in A.P, excluding all taxes. (Supply upto 90mm dia in coil & above 90mm dia straight length). For OD 110mm dia (10Kg/Sqcm) (MAT-07315)

Supply of SWG Saddles conforming to IS standards 150 x 100mm including cost and conveyance of all materials and labour charges for fixing etc., complete. (BMW-A.75)

Supply and fixing of House Service Connection (HSCs) including all materials and labour charges etc., complete and as directed by the departmental authorities. For S/D of 1/2" HDPE pipe