Dismantling of dilapidated ELSR Staircase and extension of Booster Room at Santhi Nagar ELSR in 61st Division

Dismantling of damaged Spiral Type RCC Stair Case including Cost and conveyance of necessary materials,machinary and labour charges including hire charges, scaffolding charges,removing of waste material from site including all labour charges and incidental charges etc.,Complete as directed by the departmental authorities and handover the useful material to the department.

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.For 300mm dia

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.For 300mm dia

R.C.C M25 Design Mix Supply and placing of the design mix concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

For plinth beam

Sunshades GF 0.60 wide (0.075+0.050/2) thick

Roof slab GF 125mm thick

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per Bag of cement laid over roof when it is green including cost of all materials, including convyenace charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work.

Labour engaged for removing of damaged doors and windows,waste material,cutting trees and cleaning etc.,complete

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing concrete for plain concrete (M20 Nominal mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete

Ceiling Plastering with CM(1:3) 12 MM thick including cost of all materials like cement, sand, water and labour charges etc. complete, including seigniorage charges etc., complete for finished item work..

Plastering with Cm (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss.

Plastering with Cm (1:4) 20mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.(For Internal walls)

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.(For External walls)

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Supply of CR sheet pressed section windows with hallow metal section frame of 65x40mm of 125mm thick (having centrally partition with F4B section) and shutter consists of I Section frame and 0.8mm thick vertically embossed or sheet providing guard bars of 12mm thick round M.S. bars at 110mm thick etc., and handles, stays etc., inclusive of one coat of red oxide premier etc., complete as per the direction of departmental authorities.

Supply, delivery and fixing of C.R.Sheet pressed section steel door with frame at 105 x 60mm hallow metal pressed section with 1.25 thick C.R.Sheet having 1mm thick having front sheet verticle embolding and rear side horizontal embolding. They should be jointed together with spot melding. The rate inclussion of hold tasts, aldrops, four bolts, M.S.wings must proof Zinc Chromite as primary coat including cost and conveyance of all materials and labour charges for fixing etc. complete.

Providing Name board with embossing and empaneled letters including cost and conveyance of all materials and all labour charges etc;complete as directed by departmental authorities.

Supply and fixing of 20mm dia 1.40mm to 1.55mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for swutches for light fan and separate plug points including all labour charges etc.,complete as directed by the departmental authorities.

Supply and run of 2 of 36/0.3mm (3/20) (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make:Finolex as directed by the departamental authorities.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.

Supply and Fixing of 18W/20W 1200 MM length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K , minimum CRI >70, etc complete of make PHILLIPS ,LUMILEDS/OSRAM/SAMSUNG

Supply and fixing of 6A 3 pin wall plug Modular socket with 6A Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Makes: Legrand Arteor /GM-(Four-Five)/ Goldmedal(GIFA) as directed by the departamental authorities.

Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Engaging Air Compressor 7cmm (Electrical) on hire basis including wages of driver and helper and all operational and labour charges etc.,complete

Engaging JCB on hire basis including Fuel Charges,wages of driver and helper and all operational and labour charges etc.,complete

Engaging Tractor on hire basis including Fuel Charges,wages of driver and helper and all operational and labour charges etc.,complete (5trips a day)

Supply and transportation of 30w LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS10322(Part 5 / Sec-3), Driver surge protection 4KV, In house additionalSurge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) /Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/ Keselec/HPL(CityVision)/Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Fabrication, Supply and delivery of MS 'L' type brackets made with 40 mm Nominal Bore GI pipe Medium Grade 1.5 meters length brackets suitable to 36 W LED and 70W LED fitting etc. complete. including cost of bending, conveyans to godown and all labour charges etc. complete and as per directions of the departmental authorities. Make:Jindal/Tata or equivalent.

Fabrication,Supply and delivery of MS clamps made with 40mmX5mm MS flat suitable for PSCC poles, 9.1 poles with necessary bolts and nuts etc. complete for 36 W and 70 W LED light fittings including cost of bending, welding, drilling, conveyance to godown and all labour charges etc. complete as per directions of the departmental authorities Make:Jindal/Tata or equivalent.

Labour charges For fixing Brackets, and 30 w Led lights an departmental authorities.