Replacement of old damaged 200mm Dia AC distribution line in Ramalingeswarapeta main road in 32nd Division Works Division-II Area

Manufacture, supply,& delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply up to 90 mm dia in coil & above 90 mm dia straight length in 6 M.)

Manufacture ,Supply, Delivery of HDPE and Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification.

Reducers 200 to 180 mm dia

Reducers 180 to 160 mm dia

Reducers 160 to 140 mm dia

Reducers 140 to 125 mm dia

Reducers 125 to 110 mm dia

Pipe Ends Long Neck. 110 mm dia

Pipe Ends Long Neck. 200 mm dia

hdpe bend 200mm

Tee OD 160 mm (MAT-07549 3182)

Hdpe bend 110 mm

Supply and Delivery of Bolts & Nuts including all charges as per the ditections of the departmental authorities

Supply and Delivery of Rubber flanges including all charges as per the ditections of the departmental authorities

Supply and Delivery of CID Joint 200 mm including all charges as per the ditections of the departmental authorities

Supply and Delivery of M.S Flanges including all charges as per the ditections of the departmental authorities

Supply and Delievery of M.S Dummy Plates including all charges as per the ditections of the departmental authorities

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc. complete ISI marked.PN 1.6 (MPa)

Providing Jack hammer on hire basis including all charges as per the ditections of the departmental authorities. LAB-00351

Cutting of C.C. Road surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Earth work excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc. complete

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Lowering, laying, jointing & testing of HDPE Pipes by butt fusion welding as per IS 7634-part-II/1975 as ammended from time to time to the alignment and gradient and testing the pipeline to required pressure

Providing inter connection between to the existing pipe line and newly laid AC pipe line including of all necessary inter connection materials and washers and man mazdoors etc.,etc., complete as directed by the departmental authorities. For 225mm to 350mm dia

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH For trench Portion

Providing concrete for plain concrete (M20 Design mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.

Centrifugally cast (SPUN) ductile iron pressure pipes with flanged (welded ends) for water, gas and sewage with socket spigot ends conforming to I.S, 8329/2000 in standard working lengths of 1,2,3,4 & 5 meter for classification K9 with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding taxes and duties. 1.0 mts Length For 200 mm dia