Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹2.9 L
Closing Date
23 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
EAST WORKS
17 conditions · 4 needing a document upload
Financial Eligibility Criteria: as per Clause 10.2 of Part-I of IRSGCC-2022 and as per Railway Board Advance correction slip No.1 dated 14-07-2022 The tenderer must have minimum average annual contractual turnover of V/N or "V" which ever is less: where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Financial Eligibility Criteria: As per Clause 10.2 of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) and the same is mentioned in para no.10.2 page no. 15 of this tender document. Tenderer should attach Self-attested/ Digitally signed copy of Certificate showing minimum average annual contractual turnover as per Annexure VIB of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) in Annexure - "F"Page-32 of Master Document - 1 attached to the tender
Similar Nature of work : "C-2 - Any Civil Engineering Works (excluding Track works/Zonal works)"
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to@ 10<37@ of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the 1.1.1 Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing
Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
17 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus Fifteen percent ) on CPWD DSR rates. Tenderer should note this before quoting the rates
delivered in person to the official nominated (i.e. OS/Tenders/Engg)/BZA Division) as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General Instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender document and strictly adhere to the instruction and directions given therein
Proposal for Construction of New running room with air conditioning along with kitchen at NS-20 bed capacity. (IRPSM ID.No.11.06.64.25.3.55.005)
E-47-EAST-BZA-2025~SCR
E-47-EAST-BZA-2025
Open
Works - General
9 Months
Krishna, Andhra Pradesh
₹0
₹2.9 L
23 Jan 2026
30 Dec 2025
9 Jan 2026
66 items across 2 schedules · ₹3,24,13,741.66 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum 1269 | — | 177.5 | 2,25,247.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum 761.4 | — | 196 | 1,49,234.4 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum 192.9 | — | 2,123.75 | 4,09,671.38 |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm 1200 | — | 17.6 | 21,120 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 26.1 | 7,878.5 | 2,05,628.85 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum 131.7 | — | 7,178.75 | 9,45,441.38 |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm 826.2 | — | 495.75 | 4,09,588.65 |
| 8 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag 264.38 of 50 kg cement used | — | 18.15 | 4,798.5 |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm 352.8 | — | 392.15 | 1,38,350.52 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm 1437.8 | — | 927.25 | 13,33,200.05 |
| 11 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm 741.6 | — | 736.4 | 5,46,114.24 |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 672 | 961.3 | 6,45,993.6 |
| 13 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 15 | 10,585.9 | 1,58,788.5 |
| 14 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum 243.48 | — | 9,655.7 | 23,50,969.84 |
| 15 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum 382.17 | — | 10,011.35 | 38,26,037.63 |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum 557.4 | — | 9,344.35 | 52,08,540.69 |
| 17 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 92.4 | 3,167.95 | 2,92,718.58 |
| 18 | With decorative veneering on one side and commercial veneering on other side | Sqm | 72 | 1,927.5 | 1,38,780 |
| 19 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 57.6 | 10,993.55 | 6,33,228.48 |
| 20 | Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 meter) | Sqm | 5.4 | 8,247.25 | 44,535.15 |
| 21 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | Sqm | 28.8 | 844.7 | 24,327.36 |
| 22 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm 194.4 | — | 1,112.7 | 2,16,308.88 |
| 23 | Size of Tile 600x600 mm | Sqm 1168.6 | — | 1,553.45 | 18,15,361.67 |
| 24 | Size of Tile 600 x 600 mm | Sqm | 120 | 1,464.85 | 1,75,782 |
| 25 | 75 mm diameter | Metre | 120 | 248.8 | 29,856 |
| 26 | 110 mm diameter | Metre | 240 | 377.4 | 90,576 |
| 27 | 75 mm | Each | 20 | 91.7 | 1,834 |
| 28 | 110 mm | Each | 20 | 136.15 | 2,723 |
| 29 | 75x75x75 mm | Each | 20 | 164.2 | 3,284 |
| 30 | 110x110x110 mm | Each | 20 | 234.15 | 4,683 |
| 31 | 75 mm bend | Each | 20 | 105.9 | 2,118 |
| 32 | 110 mm bend | Each | 20 | 150.35 | 3,007 |
| 33 | 75 mm | Each | 60 | 369.85 | 22,191 |
| 34 | 110 mm | Each | 100 | 371.3 | 37,130 |
| 35 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm 260.48 | — | 1,355.8 | 3,53,158.78 |
| 36 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 100 | 738.65 | 73,865 |
| 37 | 1:4 (1 cement: 4 fine sand) | Sqm 3636 | — | 347.05 | 12,61,873.8 |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm 3636 | — | 156.05 | 5,67,397.8 |
| 39 | Two coats | Sqm 3636 | — | 137.45 | 4,99,768.2 |
| 40 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm 3636 | — | 73.95 | 2,68,882.2 |
| 41 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 50 | 2,434.25 | 1,21,712.5 |
| 42 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 30 | 3,551.25 | 1,06,537.5 |
| 43 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum 587.6 | — | 263.95 | 1,55,097.02 |
| 44 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 10 | 6,515.55 | 65,155.5 |
| 45 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 15 | 1,879.2 | 28,188 |
| 46 | 40 mm nominal dia Pipes | Metre | 200 | 702.95 | 1,40,590 |
| 47 | 20 mm nominal dia Pipes | Metre | 180 | 537.6 | 96,768 |
| 48 | 25 mm nominal dia Pipes | Metre | 180 | 627.25 | 1,12,905 |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per 20000 Litre | — | 11 | 2,20,000 |
| 50 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm 46.08 | — | 1,176.8 | 54,226.94 |
| 51 | Frame size 50 x 100 mm | Metre | 84 | 947.7 | 79,606.8 |
| 52 | Frame size 65 x 150 mm | Metre 211.2 | — | 1,637.65 | 3,45,871.68 |
| 53 | 30 mm thick | Sqm | 25.2 | 4,346.7 | 1,09,536.84 |
| Schedule total | ₹2,47,78,311.41 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1MASTERDOCUMENT-1.pdf
ATTACHMENT
2MASTERDOCUMENT-2.pdf
ATTACHMENT
3Tenderschedule.pdf
ATTACHMENT
4buildingconditionsDLC.pdf
ATTACHMENT
5Generalconditionsrevised.pdf
ATTACHMENT
7Inclusionofnewbrandsinapprovedlistofbrands1.pdf
ATTACHMENT
8Revisedlistofapprovedbrands30-06-2025.pdf
ATTACHMENT
9Specificationofconcrete.pdf
ATTACHMENT
6DESIGNMIXHQrsLETTERONSPECIALCONDITIONSFORDESIGNMIX2123-03-2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .