Providing MS fencing to Budameru Bund beside SDVR Municipal High School in New RR Peta 57th Division and Providing side drain at Gayathri School side in Sundaraiah Nagar 63rd Division Works Division-II Area

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seignorage excluding dewatering charges etc., complete as per SS - 20B (APSS 308) (By Manual means)

Collection and Supply of Dust for filling including cost and conveyance charges, Spreading, Sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

Centring charges for drain sections of CC / RCC including all materials and labour charges for forming etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH. For Vertical Ports

Providing concrete for plain concrete (M20 Design mix) using 343Kgs cement 20mm, 10mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete and as per drawings and technical specifications of MORTH. Without form work

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc., complete.

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor, watering, curing etc., complete.

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete.

Manufacture, supply, delivery and fixing of MS Iron Gate, MS Grill using with MS Angulars, MS flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete and as directed by the departmental authorities.

Supply and fixing of Ornamental forged arrow tops as per approved design and shape including cost and conveyance of all materials and labour charges for fixing in position and as directed by the departmental authorities.

Hot dipped galvanised iron chain link mesh 8 guage - (4.0mm) as per IS: 2721-1979: 2" x 2" (50mm x 50mm) - 8 Guage

Labour charges for fixing of Hot dipped galvanised iron chain link mesh 8 guage (4.0mm) as per IS: 2721-1979: 2" x 2" (50mm x 50mm) - 8 Guage including cost and conveyance of all materials etc., complete and as directed by the departmental authorities.

Painting, priming coat on new plastered surface to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS.

Painting with priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. For new iron work

Removal of wet silt and sludge by manual means from sullage drains with aid of baskets and vessels including all safety wear to the labour like glouses, coats, helmets and bolts at restricted narrow field trenches.

Painting with Synthetic Enamel Paints - Two coats - for New Iron work to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS.