Replacement of old 200 mm dia HDPE Drain water distribution pipe line in place of old damaged pipes at Yaram vari Street Quarry to Eluru Road open drain in 2nd Division, (AE-8a Section) at Work Division-3 area. 5th Call General Funds

Cutting open CC Road surface including water bound mecadem including labour charges all lead and other incidential and operational charges and stacking excavated etc., complete as per ss. For 315 mm (OD)

Manufacture, Supply, & Delivery of HDPE Pipes are conforming to IS 14333 - 2000 for using underground drainage and sewerage systems including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm drain coil & above 90 mm dia. straight length) 6kg/cm2 For 315 mm (OD)

Earthwork in excavation for hard rock cutting structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH. For pipe line trench.(blasting prohibited)

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2)including transport ation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For Pipe Ends Long Neck 315 mm (OD)

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2)including transport ation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For M.S. Flanges. 315 mm (OD)

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2)including transport ation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For End Caps 315 mm (OD)

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2)including transport ation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For Bends 315 mm (OD)

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure , complete as per ss For 315 mm (OD)

Supply and delivery of bolts and nuts and washers including taxes convenyance etc. Complete as per ss .(1/2"to 1")

Supply and delivery of 6mm thick rubber sheet insertion including cost and conveyance of all materials etc.,complete as per SS.

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc. Complete as per SS.

Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide ,two coats of anty corrosie paint including cost of material, cutting , welding, bending, and fabrication charges, including transportaion, loading, unloading, at work spot.as directed by the Dept. Engineer-in- chrge.

Construction of circular manholes with a slope of 30mm to 50mm in the channel along with sewer lines as per the approved departmental drawings including cutting of C.C/B.T/WBM, earth work excavation and laying of C.C M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing top coping 150mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including supply and fixing of 35 H.D Manhole cover as per BIS:12592 (Part 1&2) with frame and encapsulated plastic steps including cost and conveyance of all materials, including cost and fabrication of steel used in R.C.C coping as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325) For 1.50m deep (1.36 to 1.65M)