Executive Engineer Circle-I works Division

Boring for Cast-in-Situ piles Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

A)380mm dia piles

B)230mm dia piles

Under Reaming for Cast-in-Situ piles Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

A)380mm dia piles

B)230mm dia piles

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308)

Conveyance of dismantling debris and excavated earth from the work site with a lead of 5 km including loading and unloading chargers as directed and as per SS

Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 380Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

A)Piles (380 mm piles)

E)Lintel beam (GF)

Lintel beam (FF)

F)Roof beams (GF)

Roof beams (FF)

G)Sunshades (0.075+0.05/2) thick,0.60m wi dth GF

G)Sunshades (0.075+0.05/2) thick,0.60m wi dth FF

Roof Slab 125mm thick GF

For 150mm thick GF

Roof Slab 125mm thick FF

For 150mm thick FF

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Collection and Supply of Dust for filling including Cost and conveyance charges, Spreading, Sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

a) Basement (Ground floor)

Super structure(FF)

Plastering in CM (1:4) 20 mm thick using best river sand from approved source including cost and conveyance of all materials, scaffolding, labour charges, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete., External walls.

a) Basement (Ground floor)

Super structure(FF)

Plastering in CM (1:4) 12 mm thick using best river sand from approved source including cost and conveyance of all materials, scaffolding, labour charges, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete., FOR INSIDE (APSS No:901, 903 & 904), Internal walls.

Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS, (Internal wallsTwo Coats).

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS, (External walls Two Coats).

Painting two coats with synthetic enamel paint new iron work including cost and conveyance of all materials of labour charges etc., complete as per SS.

Bailing out of water from pipe line trenches with oil engine driven pump sets including hire charges, fuel charges, wages of driver and helper etc., complete