Providing Street name boards for various streets in Gunadala 1st Division in Works Division-II

Manufacture, Supply and Erection of Stainless Steel Signage Boards of size 600 x 600 mm using SS316 grade horizontal and vertical pipes and support sections for sign posts shall confirm to IS Specifications SS316 grade with Matt (or) Satin finish, polishing should be diagonally matching at each corners. No hole at welding placing, Welding mark should not be visible it should be proper grinder and polished Plates and Support Sections for sign posts shall confirm SS316 and IS specifications. Aluminium Composite Panel (ACP) sheets of 4mm should have 0.5mm of Aluminium skin on both side of polyethylene core of Alucobond/Deltyn or equivalent make for sign boards shall be smooth hard to IS 736-Material Designation 24345 or 1900 ACP sheet for pasting art work with VHB tape 4991 Retro Reflective vinyl conforming to type XI make 3M or equivalent standards of ASTMD 4956-09 & as per IRC 67-2012 for full background of blue colours, border & letters white Bolts, Nuts and Washers, High Strength Bolts shall confirm to I S 1367 whereas precision bolts, nuts etc. shall confirm to I S 1364. Concrete shall be of M25 grade IS 2811-1964 recommendations for manual tig/arc welding of Stainless steel Size of board. 600 x 600 mm SS 316 pipe 75x50x2mm of length 2100 from ground level and diagonal bended of 45 degree of length 650mm to that one corner 50X25X1.5 mm SS 3165 is attached and digonal bended of 45 degrees of length 600mm is extension where whole frame of 600mm x 600mm board size is made up with SS 316 25mm x 12mm x 1.5mm where the 4mm ACP is attached. On that Street Signage stickering can be done both sides SS 316 base plate of 10mm thicknes and 18mm dia. holes for bolts ground foundation as directed by the department authorities. (Rc.E9-112360/2022) Approved Rate