Replacement of Old AC Distribution Pipe Lines in Place of damaged pipes at Kummari Bazzar Cross Roads, Gunadala in 2nd Division. (AE 8 Section) at Works Division 3 area. 2nd Call General Funds

Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for laying of pipe lines, Complete as per the ditections by the departmental authorities.

Cutting open CC road surface including water bound mecadem including labour charges all lead and other incidential and operational charges and stacking excavated etc., complete as per ss.

Manufacture,supply,& delivery of H.D.P.E pipes conforming to IS 4984 -995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) For 110 mm dia

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per T.S.No 305 MORD / 304 MORTH up to initial lift of 3.0Mts. For Pipe line trenches.

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For 110 mm dia Pipe Ends Long Neck

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For 110 mm dia M.S. Flanges

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For 110 mm dia Bends

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For 110 mm dia End Caps.

Manufacture, supply and delivery of Cast iron pipes and fittings (Spls) confirming to IS No.7181/1986, 5531/1988, 3950/1979 and CID joints confirming to I.S. No.8794/1988 at site of work anywhere in A.P.including loading, unloading, transportation to site of work stacking at site including transit risk and package including all taxes etc.complete as per speciations.

Manufacture supply & delivery of CID joints with drilled holes and including cost of ISI marked rubber rings of IS 10292-1988 bolts and nuts confirming to IS-1363-part 1, part III/1984 etc., suitable for above Class - 15 For 100mm dia

Manufacture supply & delivery of CID joints with drilled holes and including cost of ISI marked rubber rings of IS 10292-1988 bolts and nuts confirming to IS-1363-part 1, part III/1984 etc., suitable for above Class - 15 For 150mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. P.N 1.60 For 80 mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. P.N 1.60 For 100 mm dia

Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure complete as directed by the departmental authorities. For 110 mm dia

Lowering C.I./D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) For 100 mm dia MS

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) For 100 mm dia MS

Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide ,two coats of anty corrosie paint including cost of material, cutting ,welding, bending, and fabrication charges, including transportaion, loading,unloading,at work spot.as directed by the Dept. Engineer-in- chrge. SSR P.no 16 For 100 mm dia MS

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. For HDPE Jock heavy guage

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 110 to 160 dia heater

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 160 to 250 dia heater

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 110 mm dia clamp set

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 160 mm dia clamp set

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 200 mm dia clamp set

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. 250 mm dia clamp set

Manufacture, supply and delivery of HDPE Heater Jointing materials , Jock clamps, degital control box inclduing cost and conveyance of all taxes and labour charges ec., complete as per SS. HDPE pipe jointing Degital control box 110 mm dia to 400mm dia

Lowering, keeping in position and fixing C.I.Sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces etc. complete as per SS. For 80 mm dia

Lowering, keeping in position and fixing C.I.Sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces etc. complete as per SS. For 100 mm dia

Supply and delivery of bolts and nuts and washers including taxes convenyance etc. Complete as per ss.(1/2"to 1")

Supply and delivery of 6 mm thick rubber packing including taxes and conveyance etc. complete as per SS.

Providing inter connection between to the existing 100 mm dia AC pipe line and newly laid 110 mm dia HDPE Pipe line including of all necessary inter connection materials and washers and man mazdoors etc. complete as directed by the departmental authorities. For 100 x 100 x 110 mm dia

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc. complete