Fabrication Tenders in Jharkhand

New fabrication of 03 nos. battery box of Exc-2961 and Drill sl. no.- 6021401 and 6021703 of Govindpur Ph-II OCP.

Repairing/Fabrication of base plate of 2000 GPM pump coupled with marathon make induction motor installed at Karma project under Kuju Area

Fabrication and erection of 07 (Seven) nos. lighting towers with fixing of flood light of different location under GM Unit, NK Area

Dismantling , fabrication , erection and alignment of feed chute and tail end structure of 1204 belt under Loading Section of Rajrappa Washery Project

Fabrication, repairing and erection of 03 nos. Lighting Tower including fixing of flood lights at different locations under GM Unit, NK Area.

Fabrication and fitting of new rotating unit of 6/80 GME, 2000 GPM, 150 Mtr head pump as per design with material

Preparation/ Fabrication of 6 Nos. cable hanger used for general purpose in mine mianly at road crossing under Ashok OCP,PPR ARea ..

Fabrication and erection of 10 Nos. of Lighting Towers with fixing of flood lights at different locations under Purnadih OCP, NK Area

Fabrication and erection of hold brake, lever teeth, channel and plate etc. of unit no. 913 in RLB section of Kathara Washery.

Repairing/ Re fabrication of Cable tray and dressing the power and control cable near unit no. 107 Tail end area at SCW.

Fabrication and erection of spray tray and MS plate of unit no. 249 in Sec-I of HMS Section at Kathara Washery

For fabrication of radiator guard upper and lower of 02 nos. Dozer Sl. No. G11553 and G11557 at AKWMOCP, KATRAS AREA, BCCL

Re-fabrication and installation of cable tray of unit 801A and unit 701 conveyor gallery (180 meter length) at Moonidih Coal Washery.

Dismantling fabrication, erection and alignment of underflow chutes with hand operated sector of 1201 belt under main washing plant of Rajrappa Washery

Fabrication and construction of portable shed of suitable size along with electrification used as portable view point in respect to bokaro colliery

Fabrication and fitting of 05 NOS. Car haulage pulley set at Loading section of Madhuban Coal Washery under Block-II Area, BCCL .

ADMINISTRATIVE APPROVAL FOR INSTALLATION OF 2NOS. FOG CANON ,REPAIRING OF DAMAGED WATER TANK AND FABRICATION OF RAILING AT SIJUA SIDING , KATRAS AREA

For fabrication of take up axle stopper 04 Nos. of EKG Shovel Sl. No. 492 and 577 at AKWMOCP, KATRAS AREA, BCCL

Fabrication and Installation of Pump and Motor Coupling Male And Female Size 12 inch Dia at 0 Seam UG Mine Kuya Colliery.

Dismantling , fabrication, erection and alignment of cable support at different floors of PS-5 building and PS-14 at Rajrappa Washery Project

For Fabrication With Installation of Fire Fighting Arrangement With Pipe box in Water Tanker Sl. No.- 28211. at AKWMOCP ,Katras Area BCCL

Repairing/ fabrication of 04 nos. track chain guard and fitting of IDM 30 drill Sl. No. DR242 at Nichitpur OCP, Sijua Area.

For Repairing/ Fabrication of silencer assly. with duct pipe of IDM 30-II Drill Sl.No. DR-196 at AKWMOCP, KATRAS AREA, BCCL

Repairing of 6 nos. bucket door eyes line boring, Pin fabrication ,bush fitment work in CKE 167 of Purnadih project NK Area.

Fabrication and Erection of 2 nos Portable Cabin with electrification for CISF Check Post at different location of AKKOCP ,under BnK Area.

Removal of the underground 10 nos. power cable 185 sq. mm (Length 90m) and fabrication of cable tray at Moonidih Coal Washery.

Fabrication and making of 02nos.of Shed (shed for Transformer, Breaker and NGR) in mine premises for safety purpose at Muraidih, AMP Colliery.

For repairing of brace arm assly. and fabrication of Engine stand of Dozer BD355 Sl. No. 11836 at AKWMOCP, KATRAS AREA, BCCL

Fabrication/Erection and repairing of BC-1, BC-06, BC-07 belt conveyor structure at Deshaling, O/S Plant of Sawang Washery.

For repairing of crowd motor and new fabrication of railing guard of EKG Shovel Sl. No. 523 at AKWMOCP , KATRAS AREA, BCCL

Repairing, Fabrication/erection of slurry tank liner plate change and discharge pipeline change/repair etc. in Main Washing Plant at Sawang Washery.

Repairing /maintenance and Fabrication of platform structure for weigh bridge no.01, 10 and BS-II Bachra siding under CHP-CPP, PPR.

Re-fabrication and Installation of cable tray of unit 101 and 101-A conveyor gallery (150 mtr. Length) at Moonidih Coal Washery.

Re-fabrication and Installation of Cable tray of unit 701, 901 and 903 conveyor galleries (150 Mtr. Length) of Moonidih Coal Washery.

Planning, Design, Engineering, Construction, Fabrication, Erection, Supply, Installation, Testing, Trial Run and Commissioning of Coal Handling Plant (12.0 Mtpa) for AMRAPALI OCP

Fabrication and erection of new HR gate at Km OL-61 and OR-62 Ex. 123.08 of CLMC with five year maintenance.

For the installation of 600GPM Pump with delivery range for the length 900 mtr dia 6 inch MS Pipe including flange welding with supply at BOCP under Sijua Area.

1.New making of crowd motor foundation plate 04 nos. 2.Two nos hole each plate making. 3.Each plate two nos hole thread making. 4.Cutting of foundation plate 04 nos. 5.Crowd motor broken 02 nos lugs gousing and welding. 6.Welding of 04 nos foun

Miscellaneous steel structure maintenance and its associated works roof/wall sheeting of Unit 7 and 8, DVC, CTPS

Fabrication and erection of damage and leakage pipe and 02nos 8inch dia and 6inch dia bend making in running pipeline of Pundi Project, Kuju Area.

Transporting, Cutting, temporary welding drilling (04 nos. size 24mm approx) of the 60 LBS rail each rail length approx 6 mtr. for Laying track line in Underground mine Total 625 Nos.

fabrication and assembling of pontoon and installation of 4000 GPM Pump motor set on pontoon at 4-Patchpumping station of Bhowra South Colliery

new fabrication of coupling 10 inch , 02 Nos sluice valve, sluive valve 6inch 1No Foot valve 81No for quary pump under ABNS Colliery.

repairing of bucket door arm bucket eye and eye housing by welding grinding as per size and bush fitting for EKG 5A shovel 548

Partial repairing of cracked L.H. Blade arm and trunion by gauging and welding of BD 155 Dozer, 13608/T 3646 of Kabribad mine, Giridih Project

Repairing of bucket door cylinder both side upper and lower bore material depositing pin welding and machining and fitting of CKE300/159 of Bokaro OCP

50 Nos damaged Picks Holder removing and new 50 Nos Picks Holder fitting and welding of New CHP Crusher Drum at BNR Siding ROCP SJ

Repairing and Rewinding of 02 Nos. 600 Amps, 440/220V Welding Machines for EKG Shovel Sl. No HMB400 and HMB 542 of DOCP Kusunda Area

Repairing of complete old box pontoon sets by replacement of plate, angle by welding, gas cutting gausing and painting at Jamunia patch of ABOCP Mine

Repairing of damaged /worn-out platform of right side straitening, denting and welding of BE1000 Hyd Shovel SL.No. 10232 of Kuya OCP, Bastacolla Area IX