Fabrication Tenders in Jharkhand

Fabrication and fitment of 2 no end bit, 54 no bolts applicable for CAT D11T dozer D2 from end bits and cutting edge of Komatsu 475 Dozer and repairing of its mounting at AOCP.

Different type pumping and pipeline works i.e.replacing B/D 4000GPM Pump, bearing changing, fabrication of bends, tapper pipes, extension of pipe, modification of baseplate and leakage repairing in different location of Phularitand, AMP Colliery.

Dismantling of damaged drum pontoon set and repairing and fabrication of 01 set of fresh drum pontoon complete set with M.S. Plate, Angle, Channel for installation of HT Pump at Phularitand under AMP Colliery.

Fabrication of hard metal picks including hard facing and fixing on secondary chrusher roll of BWF make feeder breaker (local sl. No. 01 and local Sl. No. 02) in r/o AADOCM, Dhori Area.

Repairing and Fabrication of Operator cabin door, denting of operator cabin in glass frame and New safety glass fitting along with rubber bit in Motor grader BG-825 Sl. No. 25013 of Kathara Colliery.

Contract for Replacement of various coal chute liners, skirt board liners, mother plates, deck plates, GI Sheet and other various misc. repair jobs by fabrication and erection on rate contract basis for CHP,CTPS.

1.Welding of the partially broken part of the gear assebly. 2.Welding of the worn out portion of the gear assly. 3.Cutting of tooth/splines of the gear assly on milling m/c. 4.Welding of the partially broken teeth of pinion assly. 5.Welding of

Repairing of gravity spray pipe valve new change, upper and lower nipple change, radiator elbow cracked welding, repairing of transmission foundation and damaged guard, cleaning of radiator assly and hydraulic cooler of WS 28-II water sprinkler

1. Repairing of damaged crowd gear cover. 2. New plate cutting, bending and welding. 3. New angle cutting setting and welding.

1. Track frame cracked portion gouging. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode.

1- Propeller Shaft Complete Dismantling, Removing Fitting. 2- Propeller Shaft Teeth Cutting, Welding, Fitting. 3- Propeller Shaft Yoke Cutting, Welding, Fitting.

1. Track frame cracked portion gouging. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode.

MESH CRATE IRON 10 GAUGE, ANGLE IRON PIPES ETC 05 MM, LABOUR WITH WELDING CHARGES INCLUDING WELDING RODS AND OTHER ACCESSORIES PER SFT, GENERATOR FOR WELDING ON HIRING WITH TRANSPORTATION ETC BOQ Title boq boq

1. Repairing of operator cabin damaged portion straightening. 2. Repairing of operator cabin gate by gas heating and welding. 3. Repairing of damaged portion silencer straightening and welding. 4. Silencer tube STR straightening and welding.

EXECUTION OF MISCELLANEOUS CIVIL and ALLIED WORKS SUCH AS EARTHWORK, CONCRETING, STEEL STRUCTURE, RE WALL FOR DIFFERENT CIVIL STRUCTURES WITH THEIR OWN MATERIALS, MACHINERY AND MANPOWER ON SUB-CONTRACT BASIS

Following repairing is to be done in BD155 Dozer Sl. No. -T-13610 and BD355 Dozer Sl. No.- 12099Repairing Replacement of both side final drive assembly and Repairing of sprocket segment hole repairing, welding and grinding one side (RHS) and bolt

Cutting and welding of 6 inch dia GI pipes and 8 inch dia MS pipes for making short pieces and reducers required for changing location of the pumps as and when required in Konar Exp. OCP, BnK Area

Following repairing is to be done in BD-155 Dozer Sl. No.T-13642. 1 Repairing of cracked track frame undercarriage repair and sprocket hole work. 2 Repair/welding of cracked brace arm and its mounting pin-02 nos.

REPAIRING OF 20(TWENTY) NOS. OLD AND DAMAGED COAL TUB(OLD SIDE WALLS DISMANTLING ) ANGLE AND ALL PLATTI STRAIGHTENING) AND NEW PLATE CUTTING AS PER SIZE (5FITX3FITX3FIT) AND FIXING AND WELDING IN COAL TUB AT SALANPUR KATRAS AREA

JOINTING/WELDING OF 10INC PIPES NOS.MS FLANGE 1000 NOS BOTH END OF 02 NOS./03 NOS./04 OS.JOINTED LONG PIPES REDUCING REQUIREMENT (FOR OF FLANGES) AT AKWMC FOR USE IN 5TH AND 6TH NEW DELIVERY RANGES FOR DEWATERING

Unbranded Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge, Unbranded Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge blower, Aari (cutting saw), Basula (Adze),Nihahi (Anvil), Hammer,Chisel,Hand Drill machine,Hexa frame,hexa blade, portable ... portable welding machine

Repairing, dismantling, rewinding and backfitment of propeller shaft, universal joint, wheel hub spindle, yoke assly, flange and ring by cutting, welding, grinding and machining in the dumper SI No D11755 CAT777D Dumper at Ashok OCP at Piparwar Area

Approval for complete repairing of cabin with dust proof door, cabin support with angle welding and seat repairing, damage safety glass changing, safety net of cooler and radiator assly. of Drill Dr 183 at DOCP at Kusunda Area

Supplying and fixing of 200A, 100A, 63A, and 32A 3-pole main switch at different places of base workshop, store, pit office, and mines for controlling of switches of lighting, compressor room, and welding room of Kathara Colliery.

Dismantling, Shifting, Laying and welding of 810 mtrs, 6 inch dia pipeline for extension of delivery side pipeline from coal stock 32 to coal stock 42 for the purpose of dust suppression under Magadh OCP, M-S Area

Shifting of 02 Nos. MLA-5 Pump from upper base to lower base with extension of pipe with welding, cutting and supply of materials required for the work at 6/2 quarry of sarubera Project under Kuju Area.

Dismantling of old damaged rollers, idlers and assembling and fitting of new rollers, idlers and track frame broken portion welding, grinding and thread making (LHS and RHS) of D355 Dozer sl.no.11839 at Nichitpur OCP of Sijua Area

Repairing of dozer right side track chain cutting opening refitting pin machining sprocket segment old bolt cutting by gas 27 nos. segment hole repairing welding grinding bolt fixing 27 nos segment fitting and bolt tightening of Dozer.11902.

Repairing of upper and lower body of the pump and necessary welding and machining of impeller neckring portion main shaft bearing housing and making of body stud 4000gpm Kirloskar make pump running at Muraidih section under AMP Colliery

Repairing of Dozer right side track chain cutting opening refitting pin machining sprocket segment old bolt cutting by 27 nos. segment hole repairing welding grinding bolt fixing 27 nos. segment fitting and bolt tightening of Dozer T-13630

Repairing, Reconditioning of 04 nos. rear suspension for float by cutting , welding, grinding Also Repairing 02 nos. tie rod, 02 nos. steering cylinder, oil cooler, regulator, flange, pin connector housing all applicable to CAT 777D Dumper of Ashok

Strengthening of 1 and 2 pit head gear structure by proper welding and adding 10 mm M.S. plate support with part and stay grander as per design given by beequerdel Industries PVT limited of Kharkharee Colliery, Govindpur Area

Repairing of PTO, stone ejector, fire extinguishers stand, railing (both side LHS and RHS) platform of the Dumper by cutting welding , grinding, metal deposition and machining of the CAT 777 D TH4 Dumper of Ashok OCP, Piparwar Area

Repairing of 50 MT Make Orion Weighbridge including welding of broken MS platform plates, replacing of 09 nos. deformed, damaged I section beams including replacement of damaged parts and strengthening of weak joints under Churi Project, NK Area

Repairing, Denting, Straightening and Welding of complete machine housing, railing guard, platform and ladder, Radiator and Cooler guard, Repairing of operator cabin, seat and back rest of CK300(D) L-T Shovel, Sl. No.-724 of AMP colliery.

1.Changing of damaged radius arm eye housing, new housing and new bushing changing and welding of broken mounting of eye D-10365. 2. Repairing of exhaust silencer and ladder D-10365. 3. Repairing of rear suspension assly

Repairing of boom and arm pin damaged mounting pin place, damage bore repairing and track tensioner left side opening, tensioner welding, fitting, chain cutting and opening of Tata Hitachi 650 sl. No. 186 of Konar Expansion, BnK Area.

Repairing of dozer left side track chain cutting opening refitting pin machining sprocket segment old bolt cutting by gas 27 nos. segment hole repairing welding grinding bolt fixing 27 nos segment fitting and bolt tightening of Dozer 13630.

Repairing of boom cylinder foundation upper side both oval eye hole arm cylinder upper and lower side both oval eye hole by welding, line boring of ZX-650 Tata Hitachi backhoe Sl. No. DACG-0164, at Kathara Colliery.

Repairing of engine guard ,hinge making fitting, cutting edge mounting surface plate cracks welding with support of steel plates, LHS track chain link 4 nos. replacement with serviceable links of CAT D11T Dozer Sl. No. 918 of AKKOCP

PLACING AND TRANSPOORTING OF TWO NOS OF 10 INCH PIPE AND FLANGE WELDING OF THESE PIPE NEAR GTC THANA SUB-STATION FOR DRAINGE ATRAIN WATER AND 6 INCH MS PIPE LEAKGE REPAIRING AT GTC AGKCC INDER KATRAS AREA

Clubbed work (1) cutting, dismantling, welding, replacement of mother and liner plate, angle, channel of pajama chute of transfer point 1106 and (2) repairing work for discharge chute of conveyors 1021 and 1022 under CHP/CPP, Piparwar Area.

Cutting, welding of pipes and rearrangement or installation of 02 nos 2000 GPM pump at west side of CREW mines vi. 8 inchrange pipe line at CREW mine for discharging of water in respect of AKKOCP, BnK Area

Repairing and heightening of the existing boom barrier sensor in the road weighbridges running under AKK OCP and welding of M.S. strip in WB no.1 Wb no.2 of Jarangdih Siding in respect of AKKOCP, BnK Area

(1) COMPLETE REPAIRING OF 800 AMPS, OCB, and GEC-MAKE 550 VOLT STARTER WITH BASBUR SL.NO.75100125150200 AT RAMKANALI AKWMC UNDER KATRAS AREA. (2) COMPLETE REPAIRING / REWINDING OF 400 AMPS WELDING MACHINE 440/220 VOLT AIR COOL SL

DISMANTLING OF BELL CRANK AASLY BY CUTTING, WELDING, GRINDING 2. RECONDITIONING OF BELL CRANK BY GRINDING, CUTTING AND METAL DEPOSITION AND ITS BACKFITMENT. 3. REPPAIRING OF INUERSION VALVE AND ITS BACKFITMENT IN THE DUMPER TH-10 AT AOCP

Complete repairing of existing sluice and NR valves 6 inch and 8 inch by welding and machining and related nut, bolt and packing etc replacement by new one of pump deployed at D. D. Mines of Bokaro Colliery

Welding of MS Flange on 8inch Dia MS Pipe (500M) both side,double layer for pipeline along with supply of M.S Flange(225Nos.) and Laying/fitting of same for Hired Patch (C)at ABG Colliery under Govindpur Area

Repairing, Denting, Straightening and Welding of complete m/c housing, Railing guard, Platform and Ladder, Radiator and Cooler Guard, Counter Weight, Operator cabin, Operator seat and Back rest of BE 1000 Shovel, Sl. No.- G10122 of AMP colliery.

Repairing of 02 nos. damaged track chain guard (welding and fitting) and guard mounting broken bolt removing and tapping and track roller mounting bolt removing, tapping and fitting of IDM30 drill DR228 at Tetulmari OCP of Sijua Area