Fabrication Tenders in Rajasthan

NIB 25- Annual Rate Contract for Turning, Welding and Job works at various Rural Water Supply Schemes under Jurisdiction of Sub Division Ajeetgarh

Supply of Weld trimmer power pack Version for AT Welding AS PER RDSO SPECFICATION NO TM/SM/9 DT.16.08.91 (2ND REV.2022).

Work For Threading, Cutting, Welding Of Pipes, Turning Of C.I.D. Joints And Repairing Of Sluice Valve Of Various Size Under Sub Division Sultanpur

Work for Threading ,Cutting ,Welding of Pipes, Turning of C.I.D. Joints and Repairing of Sluice valve of various size under Sub Division Itawa

Work For Threading, Cutting, Welding Of Pipes, Turning Of C.I.D. Joints And Repairing Of Sluice Valve Of Various Size Under Sub Division Itawa

Manual metal arc welding electrode class M5 size 4x350 mm long coated heavy to specification no. IRS M28/2020 and IS:5206/1983

AT Welding Equipment(Cap preheating system)with single short crusible technology and spare parts, each set consisting of item as per Annexure-A

Manual metal arc welding electrode class M5 size 4x350 mm long coated heavy to specification no. IRS M28/2020 and IS:5206/1983

MS Welding Electrodes Class A1 Size-5mmx450mm to RDSO STR no. IRS:M28/2020, IS/AWS code ER4112 ( medium coated ) Accepted make-Supercraft Asianarc.

SET OF CAP AND SERRATED LOCK WASHER FOR PIN WELDING MACHINE, as per Drawing: MPCAP VERSION 1, Packing Instruction: NO SPECIAL PACKING REQUIRED

SUPPLY & FITMENT OF SPARES IN 03 NOS. IGBT INVERTER BASED WELDING TRANSFORMER MAKE-COLTON CAP. 400 A. AS PER LIST ATTACHED (ANNEXURE-I)

Portable Welding Machine (V2) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

As per NIT

Design , drawing fabrication , supply , erection testing and commissioning of EOT Crane 10 tone of Head Regulator of RMC of Bisalpur Project .

Supply, Fabrication and Erection of piping and equipment of ventilation and Active waste management system at OESC building of RR Site.

GEOTECHNICAL INVESTIGATIONS FOR PROVISION OF PILOT FACILITIES FOR FABRICATION AND TESTING OF AEM BASED COMPOSITES (METAMATERIAL CENTER) AT DEFENCE LAB JODHPUR

Fabrication of office cabins in Room No 207 at Bikaner House New Delhi (Job No 02/2059/GAD/SFC/2021-22)

Design, Fabrication, Supply and Installation of Fabricated Manhole Door with rearranging bends and tubes accordingly of Boiler (2x600MW), KaTPP, RVUNL, Jhalawar

Design, Fabrication, Supply, installation & commissioning of 01 No. Fixture along with Compression load cell & digital display as per attached technical specification.

Fabrication,Supply, installation and commissioning of rolling in/out examination hut as per drawing/specification enclosed. Accepted Make/Brand: SELF SAMAND

Annual work Contract for Routine and Breakdown Maintenance of flange joints and valve and cutting and welding in Turbine area of 2x600MW KaTPP Jhalawar

RUBBER HOSE FOR WELDING WITH SYNTHETIC FIBRE REINFORCEMENT IN BLUE COLOUR FOR OXYGEN N.B 8 MM TO IS 447 / 88 WITH UPTO DATE AMND.

Control Rectifier Selenium 16 plate No. H2GKLA04B01. For BERCO Make DC Rectifier Type Welding set Make - BCH ,BSA, KIRLOSKAR OR SIMILAR. ACCEPTED MAKE: H2GKLA04B01.

Weld trimmer power pack version for AT Welding as per RDSO Specification no.TM/SM/9 dated 16.8.1991 First Revision 2020. Accepted firm offer make :

RUBBER HOSE FOR WELDING AND CUTTING WITH BRAIDED TEXTILE REINFORCEMENT BORE 10MM COLOUR BLACK IS:447/1988 (Re-affirmed 2018 ).Shelf Life 24 Months.

Stainless steel welding electrode of size 2.50X350mm Coating factor : 1.51 to 2.30 similar to AWS/SFA:E308L-16. Make: Esab/Stargold/Inoseal. HSN Code: 8311

SWAN NACK (PART NUMBER SYN-MG-SWNK-500) SUITABLE FOR CO2 WELDING PLANT (400/500 Amps) TORCH MAKE - G TECH, EPE, ELECTRONICA, NEW WING

GLASS PROTECTIVE ELECTRIC ARC WELDING GR:EW-2 DARK GREEN Size 108MM X 82MM X 3MM TO BSS 679 ACCEPTED MAKE/BRAND: FIRM'S OWN MAKE

WELDING GOGGLES OF MAKE VENUS AND MODEL E767 OF VENUS OR UDYOGI MAKE MODEL NO UDYOGI GW 250 ONLY accepted make: as per description

1. MANUAL METAL ARC WELDING ELECTRODES- E7018, SIZE 4.00x450 MM, MANUFACTURED WITHIN 03 MONTHS FROM DATE OF SUPPLY. MAKE- ESAB/BOHLER/UTP/MANGALAM OR SIMILAR REPUTED BRAND. 2. MANUAL METAL ARC WELDING ELECTRODES- E9018, SIZE 4.00x450 MM, MANUFACTURED WITHIN 03 MONTHS FROM DATE OF SUPPLY. MAKE- ESAB/BOHLER/UTP/MANGALAM OR SIMILAR REPUTED BRAND.

Supply of fabrication of MS Specials, MS road, Gm nuts of various sizes at site under the Jurisdiction of Sub Division, Peesangan

NIT for Design, Fabrication, Supply, Installation-Commissioning and 5 years Maintenance of 100 kWp Grid Connected SPV Power Plant on Elevated Structures

Development, Fabrication and Supply of Mobile Infrared Laboratory (MIRL) a field trial support shelter on Stallion (4X4) Mk IV BS III Chassis

Custom Bid for Services - NLCIL-BP-Mines- Fabrication & Supply of Safety Boards at Barsingsar Lignite Mine Similar Category Printing and Photocopying Service

NIT NO. 33/2020-21 Work of Fabrication of M.S. Rod and G.M. Check nuts for various size of valves under city division II Ajmer.

RCC 1 1.5 3 work, S and I Reinforcement steel, 12 MM thick plastering, Brick work, S and F of Steel Pipe 3 mm Thickness for Ra, Replacement of Exisiting Window with 3 T, Supply and Fixing of Granite 20 mm, Supply of 3 mm Thick GI sheet, Supply of 0.5 ... Pipe, MS Fabrication work including ... including welding cu

Exhaust Break repair work, Front wheel hub loek change, Rear wheel repair and fitting work, Self Starter assy repair and fitting work, bearing pump repair work, Door repair and welding work with labour charge BOQ Title BOQ BID

NIB 26- Annual Rate Contract for Turning, Welding and Job works at various Urban or Rural Water Supply Schemes under Jurisdiction of Sub Division Shrimadhopur

NIT 55 - Annual Rate Contract for Turning, Welding and Job works at various Urban and Rural Water Supply Schemes under Jurisdiction of Sub Division Shrimadhopur

Manual metal arc welding electrode IRS class M2 size 5x350 mm long to specification no. IRS M:28/2020 Spec:specification no. IRS M:28/2017

Manual metal arc welding electrode IRS class M2 size 5x350 mm long to specification no. IRS M:28/2020 Spec:specification no. IRS M:28/2017

LUG RING TYPE COPPER OPEN END FOR 50 Sq.MM COPPER WELDING CABLE AS PER SIZE M16 STUD, WALL THICKNESS 2 MM AND LENGTH 80 MM

Supply of MCB, RCCB, SFU and Welding Receptacles for 2X660 MW plant and Super critical field hostel for the year 2023-24 at CSCTPP, Chhabra

NIT 54 - Annual Rate Contract for Turning, Welding and Job works at various Urban and Rural Water Supply Schemes under Jurisdiction of Sub Division Reengus

Work for Threading ,Cutting ,Welding of Pipes, Turning of C.I.D. Joints and Repairing of Sluice valve of various size under District Rural Sub Division Kota

Work For Threading, Cutting, Welding Of Pipes, Turning Of C.I.D. Joints And Repairing Of Sluice Valve Of Various Size Under District Rural Sub Division Kota

MS Welding Electrodes Class A1 Size-4x450mm to IRS M28/2020 IS/AWS Specification IS:814/2004 , Amndt.2, and IS/AWS code:ER4112 Medium coated.

Unbranded Welding Machine Portable Inverter type Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687751604752 dt.19/05/2023)

TOSHON Welding Machine Portable Inverter type Brand: TOSHON (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687709297101 dt.08/01/2024)

Rail Profile Weld Grinder as per RDSO Specification no. TM/SM/10 dt.16.08.1991 First Revision - July 2020. Accepted firm offer make : PANDROL WELDING & EQUIPMENT .